VAC Series Carbide 2-Flute Radius End Mill
Brand :
MISUMI
Caution
Product Description
[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
VAC-CR-EM2R
| Flute Diameter D | Radius R | Overall Length L | Overall Length L | Blade Length ℓ | Shank Diameter d | Figure | ||||||
| 1 | 0.1 | 0.2 | - | 50 | 2.5 | 6 | 1 | |||||
| 1.5 | 0.2 | 0.3 | - | 50 | 4 | 6 | 1 | |||||
| 2 | 0.2 | 0.3 | 0.5 | - | 50 | 6 | 6 | 1 | ||||
| 3 | 0.1 | 0.2 | 0.3 | 0.5 | - | 60 | 8 | 6 | 1 | |||
| 4 | 0.2 | 0.3 | 0.5 | 1 | - | 70 | 10 | 6 | 1 | |||
| 5 | 1 | - | 90 | 13 | 6 | 1 | ||||||
| 6 | 0.5 | 60 | 60 | 15 | 6 | 2 | ||||||
| 0.1 | 0.2 | 0.3 | 0.5 | 1 | - | 90 | 15 | 6 | 2 | |||
| 8 | 0.5 | 70 | 70 | 20 | 8 | 2 | ||||||
| 0.2 | 0.5 | 1 | 2 | - | 100 | 20 | 8 | 2 | ||||
| 10 | 0.2 | 0.3 | 0.5 | 1 | 2 | - | 100 | 25 | 10 | 2 | ||
| 12 | 0.5 | 1 | 80 | 80 | 30 | 12 | 2 | |||||
| 0.2 | 0.3 | 0.5 | 1 | 2 | 3 | - | 110 | 30 | 12 | 2 | ||
| 1 | 130 | 130 | 30 | 12 | 2 | |||||||
Example
● The standard with a small R tolerance has been adopted.
● Capable of high-hardness machining up to 55 HRC.
[ ! ]The electrical conductivity is minimal.