TiN Coated High-Speed Steel Spiral Tap
Brand :
MISUMI
Caution
- M8 and below are protruding centers.
Product Description
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available
Specifications
[ ! ]This product is only sold in units of packs.
1 Pack 5 Pieces Included
| Model Number | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | Quantity/ pack | ||
| Nominal M x P | |||||||||||
| G-SPFT (With Bite 2.5 P Type) G-SC-SPFT (With Bite 1.5 P Type) | M3 | 0.5 | LM2 | 46 | 11 | 18 | 4 | 3 | 6 | 3.2 | 5 Pieces |
| M4 | 0.7 | 52 | 13 | 20 | 5 | 7 | 4 | ||||
| M5 | 0.8 | 60 | 16 | 25 | 5.5 | 7 | 4.5 | ||||
| M6 | 1 | 62 | 19 | 28 | 6 | 7 | 4.5 | ||||
| M8 | 1.25 | 70 | 22 | 35 | 6.2 | 8 | 5 | ||||
| M10 | 1.5 | 75 | 24 | 39 | 7 | 8 | 5.5 | ||||
| Model Number | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | ||
| Nominal M x P | |||||||||||
| G-LS-SPFT (Long Shank Type) | M3 | 0.5 | 2.5P | LM1 | 100 | 11 | 18 | 4 | 3 | 6 | 3.2 |
| M4 | 0.7 | LM2 | 100 | 13 | 21 | 5 | 3 | 7 | 4 | ||
| M5 | 0.8 | LM2 | 100 | 16 | 25 | 5.5 | 3 | 7 | 4.5 | ||
| M6 | 1 | LM2 | 100 | 19 | 30 | 6 | 3 | 7 | 4.5 | ||
| M8 | 1.25 | LM2 | 150 | 22 | 35 | 6.2 | 3 | 8 | 5 | ||
| M10 | 1.5 | LM2 | 150 | 24 | 39 | 7 | 3 | 8 | 5.5 | ||
[ ! ]For details about cutting tap accuracy LM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
More Information
● Used for machining blind holes.
● The TiN coating provides excellent wear resistance and welding resistance.
● Using a biting portion of 1.5 peaks rather than the conventional 2.5, the number of incomplete teeth can be reduced. (G-SC-SPFT)
● The long shank type is ideal for machining screw holes in deep locations. (G-LS-SPFT)