Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported
Brand :
MISUMI
Caution
- This product is sold in packs.
- M8 and below are protruding centers.
Product Description
[Features]
·Versatile tap that can handle all work materials from general steel, heat-treated steel to stainless steel
·Efficient cutting chip discharge by short thread shape and special flute shape
Specifications
Model Number
M-SPFT
1 Pack 5 Pieces Included
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | Quantity/ pack | |
| M2 | 0.4 | 2.5P | LM1 | 40 | 8 | - | 3 | 2 | 5 | 2.5 | 5 Pieces |
| M2.5 | 0.45 | LM1 | 44 | 9.5 | - | 3 | 2 | 5 | 2.5 | ||
| M3 | 0.5 | LM2 | 46 | 5 | 20 | 4 | 3 | 6 | 3.2 | ||
| M4 | 0.7 | LM3 | 52 | 7 | 22 | 5 | 3 | 7 | 4 | ||
| M5 | 0.8 | LM3 | 60 | 8 | 25 | 5.5 | 3 | 7 | 4.5 | ||
| M6 | 1 | LM3 | 62 | 10 | 30 | 6 | 3 | 7 | 4.5 | ||
| M8 | 1.25 | LM3 | 70 | 13 | 35 | 6.2 | 3 | 8 | 5 | ||
| M10 | 1.5 | LM3 | 75 | 15 | 39 | 7 | 3 | 8 | 5.5 | ||
| M12 | 1.75 | LM4 | 82 | 18 | 42 | 8.5 | 3 | 9 | 6.5 | ||
[ ! ]M8 or below have protruding centers.
[ ! ]For details about cutting tap accuracy LM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
More Information
● A universal tap that can accommodate all models of work materials from general steel and heat-treated steel to stainless steel.
● Cutting chips can be discharged efficiently using a short thread geometry and a special groove shape.