TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
Brand :
MISUMI
Caution
Product Description
[Features]
·Demonstrates one of the best cutting performance for general steel, stainless steel, titanium, inconel, heat-resistant alloys, and other difficult-to-cut materials
·High helix shape promotes cutting chip discharge
·X-shaped thinning provides good chamfer and greatly reduces thrust load
Specifications
Model Number
SG-SDR
| Diameter D | Groove Length ℓ | Overall Length L | Pack Product Qty |
| 2 | 24 | 49 | 10 Pieces |
| 2.1 | 24 | 49 | 10 Pieces |
| 2.2 | 27 | 53 | 10 Pieces |
| 2.3 | 27 | 53 | 10 Pieces |
| 2.4 | 30 | 57 | 10 Pieces |
| 2.5 | 30 | 57 | 10 Pieces |
| 2.6 | 30 | 57 | 10 Pieces |
| 2.7 | 33 | 61 | 10 Pieces |
| 2.8 | 33 | 61 | 10 Pieces |
| 2.9 | 33 | 61 | 10 Pieces |
| 3 | 33 | 61 | 10 Pieces |
| 3.1 | 36 | 65 | 10 Pieces |
| 3.2 | 36 | 65 | 10 Pieces |
| 3.3 | 36 | 65 | 10 Pieces |
| 3.4 | 39 | 70 | 10 Pieces |
| 3.5 | 39 | 70 | 10 Pieces |
| 3.8 | 43 | 75 | 10 Pieces |
| 4 | 43 | 75 | 10 Pieces |
| 4.1 | 43 | 75 | 10 Pieces |
| 4.2 | 43 | 75 | 10 Pieces |
| 4.3 | 47 | 80 | 10 Pieces |
| 4.5 | 47 | 80 | 10 Pieces |
| 4.8 | 52 | 86 | 10 Pieces |
| 5 | 52 | 86 | 10 Pieces |
| 5.1 | 52 | 86 | 10 Pieces |
| 5.2 | 52 | 86 | 10 Pieces |
| 5.3 | 52 | 86 | 10 Pieces |
| 5.5 | 57 | 93 | 10 Pieces |
| 5.8 | 57 | 93 | 10 Pieces |
| 6 | 57 | 93 | 10 Pieces |
| 6.1 | 63 | 101 | 10 Pieces |
| 6.5 | 63 | 101 | 10 Pieces |
| 6.8 | 69 | 109 | 10 Pieces |
| 6.9 | 69 | 109 | 10 Pieces |
| 7 | 69 | 109 | 10 Pieces |
| 7.8 | 75 | 117 | 5 Pieces |
| 8 | 75 | 117 | 5 Pieces |
| 8.5 | 75 | 117 | 5 Pieces |
| 8.6 | 81 | 125 | 5 Pieces |
| 9 | 81 | 125 | 5 Pieces |
| 10 | 87 | 133 | - |
| 10.3 | 87 | 133 | - |
| 10.5 | 87 | 133 | - |
| 11 | 94 | 142 | - |
| 12 | 101 | 151 | - |
| 12.5 | 101 | 151 | - |
| 13 | 101 | 151 | - |
For Cutting Conditions, Refer to >>Click here.
More Information
●It demonstrates a perfect cutting performance from general steel to stainless steel, and even with difficult-to-cut materials such as titanium, Inconel, and heat-resistant alloys, etc.
●The discharge of cutting chips is promoted by shaping with a strong twist.
●X-model thinning provides a good bite when cutting and the thrust load is reduced significantly.