(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Part Number |
---|
SEC-CEM2B4-C[0.1-1/0.1] |
SEC-CEM2B4.5-C[0.1-1/0.1] |
SEC-CEM2B5-C[0.1-1/0.1] |
SEC-CEM2B5.5-C[0.1-1.2/0.1] |
SEC-CEM2B6-C[0.1-1.2/0.1] |
SEC-CEM2B8-C[0.1-1.4/0.1] |
SEC-CEM2B10-C[0.1-3/0.1] |
SEC-CEM2B12-C[0.1-3/0.1] |
SEC-CEM2B16-C[0.1-3/0.1] |
SEC-CEM2B20-C[0.1-3/0.1] |
SEC-CEM2L4-C[0.1-1/0.1] |
SEC-CEM2L5-C[0.1-1/0.1] |
SEC-CEM2L6-C[0.1-1.2/0.1] |
SEC-CEM2L8-C[0.1-1.4/0.1] |
SEC-CEM2L10-C[0.1-3/0.1] |
SEC-CEM2L12-C[0.1-3/0.1] |
SEC-CEM2R2-C[0.1-0.5/0.1] |
SEC-CEM2R2.5-C[0.1-0.5/0.1] |
SEC-CEM2R2.8-C[0.1-0.5/0.1] |
SEC-CEM2R3-C[0.1-0.7/0.1] |
SEC-CEM2R3.5-C[0.1-0.7/0.1] |
SEC-CEM2R4-C[0.1-1/0.1] |
SEC-CEM2R4.5-C[0.1-1/0.1] |
SEC-CEM2R5-C[0.1-1/0.1] |
SEC-CEM2R5.5-C[0.1-1.2/0.1] |
SEC-CEM2R6-C[0.1-1.2/0.1] |
SEC-CEM2R8-C[0.1-1.4/0.1] |
SEC-CEM2R10-C[0.1-3/0.1] |
SEC-CEM2R12-C[0.1-3/0.1] |
SEC-CEM2R16-C[0.1-3/0.1] |
SEC-CEM2R20-C[0.1-3/0.1] |
SEC-CEM2RL4-C[0.1-1/0.1] |
SEC-CEM2RL5-C[0.1-1/0.1] |
SEC-CEM2RL6-C[0.1-1.2/0.1] |
SEC-CEM2RL8-C[0.1-1.4/0.1] |
SEC-CEM2RL10-C[0.1-3/0.1] |
SEC-CEM2RL12-C[0.1-3/0.1] |
SEC-CEM2S2-C[0.1-0.5/0.1] |
SEC-CEM2S2.5-C[0.1-0.5/0.1] |
SEC-CEM2S2.8-C[0.1-0.5/0.1] |
SEC-CEM2S3-C[0.1-0.7/0.1] |
SEC-CEM2S3.5-C[0.1-0.7/0.1] |
SEC-CEM2S4-C[0.1-1/0.1] |
SEC-CEM2S4.5-C[0.1-1/0.1] |
SEC-CEM2S5-C[0.1-1/0.1] |
SEC-CEM2S5.5-C[0.1-1.2/0.1] |
SEC-CEM2S6-C[0.1-1.2/0.1] |
SEC-CEM2S8-C[0.1-1.4/0.1] |
SEC-CEM2S10-C[0.1-3/0.1] |
SEC-CEM2S12-C[0.1-3/0.1] |
SEC-CEM2S16-C[0.1-3/0.1] |
SEC-CEM2S20-C[0.1-3/0.1] |
SEC-CEM2SR4-C[0.1-1/0.1] |
SEC-CEM2SR5-C[0.1-1/0.1] |
SEC-CEM2SR6-C[0.1-1.2/0.1] |
SEC-CEM2SR8-C[0.1-1.4/0.1] |
SEC-CEM2SR10-C[0.1-3/0.1] |
SEC-CEM2SR12-C[0.1-3/0.1] |
SEC-CEM4B3-C[0.1-0.7/0.1] |
SEC-CEM4B4-C[0.1-1/0.1] |
SEC-CEM4B5-C[0.1-1/0.1] |
SEC-CEM4B6-C[0.1-1.2/0.1] |
SEC-CEM4B8-C[0.1-1.4/0.1] |
SEC-CEM4B10-C[0.1-3/0.1] |
SEC-CEM4B12-C[0.1-3/0.1] |
SEC-CEM4R3-C[0.1-0.7/0.1] |
SEC-CEM4R3.5-C[0.1-0.7/0.1] |
SEC-CEM4R4-C[0.1-1/0.1] |
SEC-CEM4R4.5-C[0.1-1/0.1] |
SEC-CEM4R5-C[0.1-1/0.1] |
SEC-CEM4R5.5-C[0.1-1/0.1] |
SEC-CEM4R6-C[0.1-1.2/0.1] |
SEC-CEM4R8-C[0.1-1.4/0.1] |
SEC-CEM4R10-C[0.1-3/0.1] |
SEC-CEM4R12-C[0.1-3/0.1] |
SEC-CEM4S3-C[0.1-0.7/0.1] |
SEC-CEM4S3.5-C[0.1-0.7/0.1] |
SEC-CEM4S4-C[0.1-1/0.1] |
SEC-CEM4S4.5-C[0.1-1/0.1] |
SEC-CEM4S5-C[0.1-1/0.1] |
SEC-CEM4S5.5-C[0.1-1/0.1] |
SEC-CEM4S6-C[0.1-1.2/0.1] |
SEC-CEM4S8-C[0.1-1.4/0.1] |
SEC-CEM4S10-C[0.1-3/0.1] |
SEC-CEM4S12-C[0.1-3/0.1] |
TSC-CEM2B2-C[0.1-0.5/0.1] |
TSC-CEM2B4-C[0.1-1/0.1] |
TSC-CEM2B5-C[0.1-1/0.1] |
TSC-CEM2B6-C[0.1-1.2/0.1] |
TSC-CEM2B8-C[0.1-1.4/0.1] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Coating | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Corner (C) (mm) | Figure |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6.75 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8.25 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | Non-Coated | 8 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 2 | Non-Coated | 10 | 70 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 18 | 2 | Non-Coated | 12 | 75 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 16 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 2 | Non-Coated | 16 | 100 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 20 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 2 | Non-Coated | 20 | 105 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 16 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 20 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 32 | 2 | Non-Coated | 8 | 100 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 40 | 2 | Non-Coated | 10 | 100 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 48 | 2 | Non-Coated | 12 | 100 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | Non-Coated | 4 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 2 | Non-Coated | 4 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2.8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8.4 | 2 | Non-Coated | 4 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10.5 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 13.5 | 2 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 2 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 16.5 | 2 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 18 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 2 | Non-Coated | 8 | 70 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 2 | Non-Coated | 10 | 80 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 36 | 2 | Non-Coated | 12 | 85 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 16 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 48 | 2 | Non-Coated | 16 | 110 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 20 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 60 | 2 | Non-Coated | 20 | 130 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 14 | 2 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 17.5 | 2 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 21 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 28 | 2 | Non-Coated | 8 | 70 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 35 | 2 | Non-Coated | 10 | 80 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 42 | 2 | Non-Coated | 12 | 95 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 4 | 2 | Non-Coated | 4 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 5 | 2 | Non-Coated | 4 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 2.8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 5.6 | 2 | Non-Coated | 4 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 11 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 16 | 2 | Non-Coated | 8 | 55 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 20 | 2 | Non-Coated | 10 | 65 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 2 | Non-Coated | 12 | 75 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 16 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 32 | 2 | Non-Coated | 16 | 105 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 20 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 40 | 2 | Non-Coated | 20 | 110 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10 | 2 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12.5 | 2 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 2 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 20 | 2 | Non-Coated | 8 | 70 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 25 | 2 | Non-Coated | 10 | 80 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 2 | Non-Coated | 12 | 85 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 4.5 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | Non-Coated | 8 | 55 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 7 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 4 | Non-Coated | 10 | 65 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 18 | 4 | Non-Coated | 12 | 75 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10.5 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 13.5 | 4 | Non-Coated | 6 | 50 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 15 | 4 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 16.5 | 4 | Non-Coated | 6 | 55 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 18 | 4 | Non-Coated | 6 | 60 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 4 | Non-Coated | 8 | 70 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 30 | 4 | Non-Coated | 10 | 80 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 36 | 4 | Non-Coated | 12 | 85 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 3.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 0.7 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 8 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 4.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 10 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 5.5 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 11 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 4 | Non-Coated | 6 | 45 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 16 | 4 | Non-Coated | 8 | 55 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 1.4 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 20 | 4 | Non-Coated | 10 | 65 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 5 Day(s) | 12 | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 24 | 4 | Non-Coated | 12 | 75 | Flat Surface / Side Surface / Inclined Cutting | 0.1 ~ 3 | 2 | ||
- | END MILL | 1 Piece(s) | 11 Day(s) | 2 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 3 | 2 | For High Hardness (Silicone-Based) | 4 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 0.5 | 1 | ||
- | END MILL | 1 Piece(s) | 11 Day(s) | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 11 Day(s) | 5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1 | 1 | ||
- | END MILL | 1 Piece(s) | 11 Day(s) | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 2 | For High Hardness (Silicone-Based) | 6 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.2 | 2 | ||
- | END MILL | 1 Piece(s) | 11 Day(s) | 8 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○] | 12 | 2 | For High Hardness (Silicone-Based) | 8 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0.1 ~ 1.4 | 2 |
Loading...
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
2 | 0.1 ~ 0.5 | 3 | 40 | 4 | 1 |
2.5 | 0.1 ~ 0.5 | 3.75 | 40 | 4 | 1 |
3 | 0.1 ~ 0.7 | 4.5 | 45 | 6 | 1 |
3.5 | 0.1 ~ 0.7 | 5.25 | 45 | 6 | 1 |
4 | 0.1 ~ 1.0 | 6 | 45 | 6 | 1 |
4.5 | 0.1 ~ 1.0 | 6.75 | 45 | 6 | 1 |
5 | 0.1 ~ 1.0 | 7.5 | 45 | 6 | 1 |
5.5 | 0.1 ~ 1.0 | 8.25 | 45 | 6 | 1 |
6 | 0.1 ~ 1.2 | 9 | 45 | 6 | 2 |
8 | 0.1 ~ 1.4 | 12 | 60 | 8 | 2 |
10 | 0.1 ~ 3.0 | 15 | 70 | 10 | 2 |
12 | 0.1 ~ 3.0 | 18 | 75 | 12 | 2 |
16 | 0.1 ~ 3.0 | 24 | 100 | 16 | 2 |
20 | 0.1 ~ 3.0 | 30 | 105 | 20 | 2 |
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
2 | 0.1 ~ 0.5 | 4 | 40 | 4 | 1 |
2.5 | 0.1 ~ 0.5 | 5 | 40 | 4 | 1 |
2.8 | 0.1 ~ 0.5 | 5.6 | 40 | 4 | 1 |
3 | 0.1 ~ 0.7 | 6 | 45 | 6 | 1 |
3.5 | 0.1 ~ 0.7 | 7 | 45 | 6 | 1 |
4 | 0.1 ~ 1.0 | 8 | 45 | 6 | 1 |
4.5 | 0.1 ~ 1.0 | 9 | 45 | 6 | 1 |
5 | 0.1 ~ 1.0 | 10 | 45 | 6 | 1 |
5.5 | 0.1 ~ 1.0 | 11 | 45 | 6 | 1 |
6 | 0.1 ~ 1.2 | 12 | 45 | 6 | 2 |
8 | 0.1 ~ 1.4 | 16 | 55 | 8 | 2 |
10 | 0.1 ~ 3.0 | 20 | 65 | 10 | 2 |
12 | 0.1 ~ 3.0 | 24 | 75 | 12 | 2 |
16 | 0.1 ~ 3.0 | 32 | 100 | 16 | 2 |
20 | 0.1 ~ 3.0 | 40 | 105 | 20 | 2 |
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
3 | 0.1 ~ 0.7 | 7.5 | 45 | 6 | 1 |
4 | 0.1 ~ 1.0 | 10 | 50 | 6 | 1 |
5 | 0.1 ~ 1.0 | 12.5 | 55 | 6 | 1 |
6 | 0.1 ~ 1.2 | 15 | 60 | 6 | 2 |
8 | 0.1 ~ 1.4 | 20 | 70 | 8 | 2 |
10 | 0.1 ~ 3.0 | 25 | 80 | 10 | 2 |
12 | 0.1 ~ 3.0 | 30 | 85 | 12 | 2 |
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
2 | 0.1 ~ 0.5 | 6 | 45 | 4 | 1 |
2.5 | 0.1 ~ 0.5 | 7.5 | 45 | 4 | 1 |
2.8 | 0.1 ~ 0.5 | 8.4 | 45 | 4 | 1 |
3 | 0.1 ~ 0.7 | 9 | 45 | 6 | 1 |
3.5 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
4 | 0.1 ~ 1.0 | 12 | 50 | 6 | 1 |
4.5 | 0.1 ~ 1.0 | 13.5 | 50 | 6 | 1 |
5 | 0.1 ~ 1.0 | 15 | 55 | 6 | 1 |
5.5 | 0.1 ~ 1.0 | 16.5 | 55 | 6 | 1 |
6 | 0.1 ~ 1.2 | 18 | 60 | 6 | 2 |
8 | 0.1 ~ 1.4 | 24 | 70 | 8 | 2 |
10 | 0.1 ~ 3.0 | 30 | 80 | 10 | 2 |
12 | 0.1 ~ 3.0 | 36 | 85 | 12 | 2 |
16 | 0.1 ~ 3.0 | 48 | 115 | 16 | 2 |
20 | 0.1 ~ 3.0 | 60 | 125 | 20 | 2 |
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
3 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
4 | 0.1 ~ 1.0 | 14 | 50 | 6 | 1 |
5 | 0.1 ~ 1.0 | 17.5 | 55 | 6 | 1 |
6 | 0.1 ~ 1.2 | 21 | 60 | 6 | 2 |
8 | 0.1 ~ 1.4 | 28 | 70 | 8 | 2 |
10 | 0.1 ~ 3.0 | 35 | 80 | 10 | 2 |
12 | 0.1 ~ 3.0 | 42 | 95 | 12 | 2 |
Flute Diameter D | Corner C 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
3 | 0.1 ~ 0.7 | 12 | 50 | 6 | 1 |
4 | 0.1 ~ 1.0 | 16 | 60 | 6 | 1 |
5 | 0.1 ~ 1.0 | 20 | 60 | 6 | 1 |
6 | 0.1 ~ 1.2 | 24 | 60 | 6 | 2 |
8 | 0.1 ~ 1.4 | 32 | 100 | 8 | 2 |
10 | 0.1 ~ 3.0 | 40 | 100 | 10 | 2 |
12 | 0.1 ~ 3.0 | 48 | 100 | 12 | 2 |
Model | Square | Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
---|---|---|---|---|---|
Additional Classification | Manufactured Product | Tolerance of OD(mm) | 0 ~ -0.02 |
How can we improve?
How can we improve?