TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
Caution
Product Description
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
| Model Number | Flute Length ℓ | Under Neck Diameter d1 | Overall Length L | Shank Diameter d | Figure | |||
| Outer Diameter D | Radius R | Effective Length ℓ1 | ||||||
| TSC-CRLN-HFEM3S | 4 | 1 | 28 | 8 | 3.8 | 70 | 4 | 1 |
| 6 | 1.5 | 30 | 12 | 5.8 | 80 | 6 | 2 | |
| 6 | 1.5 | 42 | 12 | 5.8 | 90 | 6 | 2 | |
| 8 | 2 | 40 | 16 | 7.7 | 85 | 8 | 2 | |
| 8 | 2 | 56 | 16 | 7.7 | 100 | 8 | 2 | |
| 10 | 2 | 50 | 20 | 9.7 | 100 | 10 | 2 | |
| 10 | 2 | 70 | 20 | 9.7 | 120 | 10 | 2 | |
| 10 | 2 | 90 | 20 | 9.7 | 140 | 10 | 2 | |
| 12 | 2 | 60 | 24 | 11.7 | 110 | 12 | 2 | |
| 12 | 2 | 84 | 24 | 11.7 | 135 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, realizing a longer operational life.
● The combination of a radius with negative flutes, appropriate core thickness and 45° twist yields an improved high-capacity machining thanks to the high rigidity, sharpness and high feed rate.
● The long neck model is ideal for machining deep grooves, such as deep pockets.
● Universal model capable of everything from engraving through to side-surface, curving, coarse and medium finishing.