(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Part Number |
---|
TSC-TEM2R5-5 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter D1 (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 3,288.00 | END MILL | 1 Piece(s) | 3 Day(s) | - | 5 | 5 | 20 | 8 | 60 | 8.50 |
Loading...
Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
Outer Diameter D |
Single Angle θ |
|||||
TSC-TEM2R | 0.5 | 1° | 2 | 0.57 | 50 | 4 |
2° | 2 | 0.64 | 50 | 4 | ||
3° | 2 | 0.71 | 50 | 4 | ||
5° | 2 | 0.85 | 50 | 4 | ||
10° | 2 | 1.21 | 50 | 4 | ||
15° | 2 | 1.57 | 50 | 4 | ||
1 | 1° | 4 | 1.14 | 50 | 4 | |
2° | 4 | 1.28 | 50 | 4 | ||
3° | 4 | 1.42 | 50 | 4 | ||
5° | 4 | 1.70 | 50 | 4 | ||
6° | 4 | 1.84 | 50 | 4 | ||
7° | 4 | 1.98 | 50 | 4 | ||
10° | 4 | 2.41 | 50 | 4 | ||
12° | 4 | 2.70 | 50 | 4 | ||
15° | 3 | 2.60 | 50 | 4 | ||
20° | 3 | 3.18 | 50 | 4 | ||
30° | 2.6 | 4.00 | 50 | 4 | ||
1.5 | 1° | 6 | 1.71 | 50 | 4 | |
2° | 6 | 1.92 | 50 | 4 | ||
3° | 6 | 2.13 | 50 | 4 | ||
5° | 6 | 2.55 | 50 | 4 | ||
6° | 6 | 2.76 | 50 | 4 | ||
7° | 6 | 2.97 | 50 | 4 | ||
10° | 6 | 3.62 | 50 | 4 | ||
12° | 6 | 4.05 | 50 | 4 | ||
15° | 5 | 4.18 | 50 | 4 | ||
20° | 5 | 5.14 | 50 | 6 | ||
30° | 3.9 | 6.00 | 50 | 6 | ||
2 | 0.5° | 8 | 2.14 | 50 | 4 | |
1° | 8 | 2.28 | 50 | 4 | ||
2° | 8 | 2.56 | 50 | 4 | ||
3° | 8 | 2.84 | 50 | 4 | ||
5° | 8 | 3.40 | 50 | 4 | ||
6° | 8 | 3.68 | 50 | 4 | ||
7° | 8 | 3.96 | 50 | 4 | ||
10° | 8 | 4.82 | 50 | 6 | ||
12° | 8 | 5.40 | 50 | 6 | ||
15° | 7 | 5.75 | 50 | 6 | ||
20° | 5.5 | 6.00 | 50 | 6 | ||
30° | 4 | 6.62 | 50 | 6 |
Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
Outer Diameter D |
Single Angle θ |
|||||
TSC-TEM2R | 3 | 0.5° | 12 | 3.21 | 60 | 4 |
1° | 12 | 3.42 | 60 | 4 | ||
2° | 12 | 3.84 | 60 | 4 | ||
3° | 12 | 4.26 | 60 | 4 | ||
5° | 12 | 5.10 | 60 | 6 | ||
6° | 12 | 5.52 | 60 | 6 | ||
7° | 12 | 5.95 | 60 | 6 | ||
10° | 12 | 7.23 | 60 | 8 | ||
12° | 11 | 7.68 | 60 | 8 | ||
15° | 11 | 8.89 | 60 | 10 | ||
20° | 9 | 9.55 | 60 | 10 | ||
30° | 5 | 8.77 | 60 | 10 | ||
4 | 0.5° | 16 | 4.28 | 60 | 4 | |
1° | 16 | 4.56 | 60 | 6 | ||
2° | 16 | 5.12 | 60 | 6 | ||
3° | 16 | 5.68 | 60 | 6 | ||
5° | 16 | 6.80 | 60 | 6 | ||
6° | 16 | 7.36 | 60 | 8 | ||
7° | 16 | 7.93 | 60 | 8 | ||
10° | 16 | 9.64 | 60 | 10 | ||
15° | 14 | 11.50 | 60 | 12 | ||
20° | 10 | 11.28 | 60 | 12 | ||
30° | 6 | 10.93 | 60 | 12 | ||
5 | 0.5° | 20 | 5.35 | 60 | 6 | |
1° | 20 | 5.70 | 60 | 6 | ||
2° | 20 | 6.40 | 60 | 6 | ||
3° | 20 | 7.10 | 60 | 8 | ||
5° | 20 | 8.50 | 60 | 8 | ||
6 | 0.5° | 24 | 6.42 | 70 | 6 | |
1° | 24 | 6.84 | 70 | 8 | ||
2° | 24 | 7.68 | 70 | 8 | ||
3° | 24 | 8.52 | 70 | 8 | ||
5° | 24 | 10.20 | 70 | 10 |
For Cutting Conditions, Refer to >>Click here.
● It has a TS film-coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● The blade tip has a sharp edge allowing corner edges to also be machined.
Model | Tapered Square | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Torsion Angle | Standard Helix (30 to 40°) |
Please check the type/dimensions/specifications of the part TSC-TEM2R5-5 in the TSC series carbide tapered end mill, 2-flute / regular model series.
Part Number |
---|
TSC-TEM2R0.5-2 |
TSC-TEM2R0.5-3 |
TSC-TEM2R0.5-5 |
TSC-TEM2R6-0.5 |
TSC-TEM2R6-1 |
TSC-TEM2R6-2 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | RoHS | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter D1 (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|
฿ 1,990.00 | 1 Piece(s) | 3 Day(s) | - | 2 | 0.5 | 2 | 4 | 50 | 0.64 | ||
฿ 1,518.00 | 1 Piece(s) | 3 Day(s) | - | 3 | 0.5 | 2 | 4 | 50 | 0.71 | ||
฿ 2,250.00 | 1 Piece(s) | 3 Day(s) | - | 5 | 0.5 | 2 | 4 | 50 | 0.85 | ||
฿ 1,959.00 | 1 Piece(s) | 3 Day(s) | - | 0.5 | 6 | 24 | 6 | 70 | 6.42 | ||
฿ 2,248.99 | 1 Piece(s) | Available | 3 Day(s) | - | 1 | 6 | 24 | 8 | 70 | 6.84 | |
฿ 2,201.43 | 1 Piece(s) | Available | 3 Day(s) | - | 2 | 6 | 24 | 8 | 70 | 7.68 |
How can we improve?
How can we improve?