TSC series carbide radius end mill, 4-flute, 45°, regular model
Caution
Product Description
[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
TSC-CR-HEM4R (Stocked Product) / T-TSC-HEM4R (Manufactured Product)
| Outer Diameter D | Radius R CR Select 0.1mm Increment Designation (Stocked Product) (Manufactured Product) | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | ● Stocked Product □ Manufactured Product | ||||||
| 3 | 0.2 | 0.3 | 0.5 | 16 | 60 | 6 | 1 | ● | ||||
| 4 | 0.2 | 0.3 | 0.5 | 1 | 18 | 60 | 6 | 1 | ● | |||
| 0.1 ~ 0.4 | □ | |||||||||||
| 5 | 0.3 | 0.5 | 1 | 21 | 60 | 6 | 1 | ● | ||||
| 0.1 ~ 0.4 | □ | |||||||||||
| 6 | 0.3 | 0.5 | 1 | 21 | 60 | 6 | 2 | ● | ||||
| 0.1 ~ 0.9 | □ | |||||||||||
| 7 | 0.1 ~ 1.0 | 24 | 60 | 8 | 1 | □ | ||||||
| 7.5 | 0.1 ~ 1.0 | 24 | 60 | 8 | 1 | □ | ||||||
| 8 | 0.3 | 0.5 | 1 | 1.5 | 2 | 26 | 75 | 8 | 2 | ● | ||
| 0.1 ~ 1.4 | □ | |||||||||||
| 10 | 0.3 | 0.5 | 1 | 1.5 | 2 | 34 | 90 | 10 | 2 | ● | ||
| 0.1 ~ 1.9 | □ | |||||||||||
| 12 | 0.3 | 0.5 | 1 | 1.5 | 2 | 3 | 38 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | |||||||||||
| 16 | 0.5 | 1 | 2 | 3 | 48 | 110 | 16 | 2 | ● | |||
| 0.1 ~ 2.9 | □ | |||||||||||
| 20 | 0.5 | 1 | 2 | 3 | 56 | 130 | 20 | 2 | ● | |||
| 0.1 ~ 2.9 | □ | |||||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
For Coating Service, Refer to >>Click here.
For Carbide End Mill Coating Types and Features, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.