EMI Countermeasure D-sub Connector with Resin Hood (Both Solder/Pressure Welding)
Brand :
MISUMI
Caution
Product Description
[Features]Hood manufactured by Hirose Electric. The surface of the hood is nickel plating, making it an excellent EMI (electromagnetic interference) countermeasure. A hood that can be attached when connecting a fused cable (round cable with a ribbon cable tip) to an IDC type D-sub connector. Solder-type D-sub connectors (including high-density types) can also be plugged.
● As the surface of the hood is treated with nickel plating, it has a finish excellent for EMI (electromagnetic interference) countermeasures.
● Hoods that can be mounted when fusion cables (round cables with their ends processed in a flat cable form) and pressure welded model D-sub connectors are connected.
● Soldered D-sub connectors (including high-density model) can be built in as well.
· Hoods for 50-core model (high density 78-core) are not in production.
· For installing an EMI press contact D-sub, first remove the strain relief.
· High current D-sub cannot be built in.
Specifications
| Model Number | Number of Cores Parentheses show high-density type | Screw Type | Weight g |
| HDE-CTH-10 | 9 (15) | M2.6 Short | 15.0 |
| HDA-CTH-10 | 15 (26) | 18.0 | |
| HDB-CTH-10 | 25 (44) | 27.0 | |
| HDC-CTH-10 | 37 (62) | 33.0 | |
| HDE-CTH-4-40-10 | 9 (15) | #4-40 Short | 15.6 |
| HDA-CTH-4-40-10 | 15 (26) | 19.2 | |
| HDB-CTH-4-40-10 | 25 (44) | 28.1 | |
| HDC-CTH-4-40-10 | 37 (62) | 36.7 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |