D-sub Connector, Crimped Housing
Brand :
MISUMI
Caution
Product Description
Crimp connection model that makes consistent workmanship quality possible
● D-sub connector that is connected using an easy-to-use dedicated crimp tool.
Since the surface is given nickel plating, you can take advantage of the EMI effect in the connection with a connector with EMI protection to the fullest.
Rated Current: 5A Rated Voltage: 250V AC or less
Compatible Electric Wire Size:AWG18 – 28 or 0.81 mm2 – 0.08 mm2
· Contacts are not included with the connector housing.
· Incorporate a male contact to the male (pin) housing, and a female contact to the female (socket) housing.
Specifications
| Model | Number of Cores | Type |
| DEU-9PF-F0 | 9 | Male (Pin) |
| DAU-15PF-F0 | 15 | |
| DBU-25PF-F0 | 25 | |
| DCU-37PF-F0 | 37 | |
| DDU-50PF-F0 | 50 | |
| DEU-9SF-F0 | 9 | Female (Socket) |
| DAU-15SF-F0 | 15 | |
| DBU-25SF-F0 | 25 | |
| DCU-37SF-F0 | 37 | |
| DDU-50SF-F0 | 50 |
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |  |  |  |  |
| High-density type |  |  |  |  |  |