Compression Spring - I.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant]
Brand :
MISUMI
Caution
- This product can be purchased in quantities of 10pcs. Please enter your order quantity in multiples of 10. * Minimum order quantity (10 pcs. or more)
- Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
- Stainless Steel Spring is magnetic.
Product Description
・ Spring type: Compression Spring, Heavy Load
・ I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
・ Spring material: Made of stainless steel SUS304-WPB
・ Model type: E-GVUL, E-GVUM
・ Inner diameter D (Ø) [mm]: 5, 6, 8, 10, 12, 16
・ Free length range [mm]: 15, 20, 25, 30, 35, 40
・ End face type: No grinding, With grinding
・ RoHS compliant certified
Product Overview
[Product Comparison Information]
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
| Item | MISUMI's Similar Products | Economy Series |
| Service Life | 1 million times | 700,000 Times |
| Manufactured | In Japan | Outside of Japan |
Dimensional Drawing
Closed Ends (*Both Ends Not Ground) Close Ends (Both Ends Ground) +0.6 mm +0.1 mm +0.8 mm +0.1 mm
| I.D. D | ø8 or Less | Free Length L | ±1 mm | ||
| ø10 or More | Spring Constant | ±10% |
Specification Table
| Ordering Example | Part Number |
| E－GVUM6－15 | |
■E-GVUL: Fmax. (allowable deflection) = L × 40%
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type D-L | |||||||||
| E-GVUL | 5-15 | 6.2 | 0.6 | 6 | 5.88{0.60} | 2.5 | 4.8 | 7.0 | |
| 20 | 8 | 7.84{0.80} | 3.3 | ||||||
| 6-15 | 7.4 | 0.7 | 6 | 5.88{0.60} | 2.1 | 6.3 | 8.0 | ||
| 20 | 8 | 7.84{0.80} | 2.9 | ||||||
| 25 | 7.6 | 0.8 | 10 | 9.8{1.00} | 2.3 | 10.4 | 12.0 | ||
| 30 | 12 | 11.76{1.20} | 2.7 | ||||||
| 35 | 14 | 13.72{1.40} | 3.2 | ||||||
| 8-20 | 9.8 | 0.9 | 8 | 7.84{0.80} | 2.4 | 9.5 | 9.5 | ||
| 25 | 10 | 9.8{1.00} | 2.9 | ||||||
| 30 | 10.0 | 1.0 | 12 | 11.76{1.20} | 2.5 | 14.0 | 13.0 | ||
| 35 | 14 | 13.72{1.40} | 2.9 | ||||||
| 10-20 | 12.0 | 1.0 | 8 | 7.84{0.80} | 3.1 | 8.5 | 7.5 | ||
| 25 | 10 | 9.8{1.00} | 3.8 | ||||||
| 30 | 12.2 | 1.1 | 12 | 11.76{1.20} | 3.2 | 12.7 | 10.5 | ||
| 35 | 14 | 13.72{1.40} | 3.7 | ||||||
| 12-25 | 14.4 | 1.2 | 10 | 9.8{1.00} | 2.9 | 12.6 | 9.5 | ||
| 35 | 14 | 13.72{1.40} | 4.1 | ||||||
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■E-GVUM: Fmax. (allowable deflection) = L × 35%
kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type D-L | |||||||||
| E-GVUM | 5-15 | 6.6 | 0.8 | 5.3 | 15.39{1.57} | 2.3 | 6.8 | 7.5 | |
| 20 | 6.8 | 0.9 | 7.0 | 20.58{2.10} | 1.8 | 11.7 | 12.0 | ||
| 40 | 7.0 | 1.0 | 14.0 | 41.16{4.20} | 3.2 | 14.5 | 13.5 | ||
| 6-15 | 7.8 | 0.9 | 5.3 | 15.39{1.57} | 2.3 | 7.7 | 7.5 | ||
| 20 | 7.0 | 20.58{2.10} | 3.0 | ||||||
| 25 | 8.0 | 1.0 | 8.8 | 25.68{2.62} | 2.8 | 11.0 | 10.0 | ||
| 30 | 10.5 | 30.87{3.15} | 3.3 | ||||||
| 8-20 | 10.2 | 1.1 | 7.0 | 20.58{2.10} | 3.3 | 8.8 | 7.0 | ||
| 25 | 8.8 | 25.68{2.62} | 4.2 | ||||||
| 30 | 10.5 | 30.87{3.15} | 5.0 | ||||||
| 10-20 | 12.4 | 1.2 | 7.0 | 20.58{2.10} | 4.0 | 8.4 | 6.0 | ||
| 25 | 12.6 | 1.3 | 8.8 | 25.68{2.62} | 4.2 | 10.4 | 7.0 | ||
| 30 | 10.5 | 30.87{3.15} | 5.0 | ||||||
| 12-25 | 14.8 | 1.4 | 8.8 | 25.68{2.62} | 5.0 | 9.8 | 6.0 | ||
| 16-35 | 19.6 | 1.8 | 12.3 | 35.97{3.67} | 5.8 | 14.4 | 7.0 | ||
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■Spring Constant (N/mm) [kgf/mm]
| O.D. D | O.D. Referenced | ||||||||
| E-GUV | E-GUY | E-GUR | E-GUF | E-GUL | E-GUTT | E-GUM | E-GUH | E-GUBB | |
| 2 | 0.05 {0.005} | 0.20 {0.02} | 0.30 {0.03} | 0.50 {0.05} | |||||
| 3 | 0.05 {0.005} | 0.098 {0.010} | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.1} | 1.5 {0.15} | |||
| 4 | 2.0 {0.2} | 2.9 {0.3} | 4.9 {0.5} | ||||||
| 5 | 2.0 {0.2} | ||||||||
| 6 | 2.9 {0.3} | 5.9 {0.6} | 9.8 {1.0} | ||||||
| 8 | |||||||||
| 10 | 0.200 {0.020} | ||||||||
| 12 | |||||||||
| 13 | 2.0 {0.2} | 2.9 {0.3} | 9.8 {1.0} | 19.6 {2.0} | |||||
| 16 | 0.49 {0.05} | ||||||||
| 20 | 0.98 {0.10} | 2.90 {0.3} | 4.9 {0.5} | 14.7 {1.5} | 29.4 {3.0} | ||||
| Fmax. | F = L × 70% | F = L × Fa% | F = L × Fa% | F = L × 45% | F = L × 40% | F = L × Fa% | F = L × 35% | F = L × 30% | F = L × 25% |
| I.D. D | I.D. Referenced | |||
| E-GVUR | E-GVUF | E-GVUL | E-GVUM | |
| 5 | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.10} | 2.94 {0.30} |
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| Fmax. | F= L × 60% | F= L × 45% | F= L × 40% | F= L × 35% |
Related Products
| [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Extra Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Heavy Load | ||
 |  |  | ||
| Type: E-GUF, E-GUR, E-GUV, E-GUY | Type: E-GUL, E-GUTT | Type: E-GUH, E-GUM |
Note
Cautions on UseOperating Temperature
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
Stainless Steel Spring is magnetic.