Locating Pins Small Head, Spherical, Tapped

The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings. The small head spherical tapped type is easy to assemble and disassemble, and effectively ensures that the workpiece is smoothly guided into the positioning position.

Martensitic stainless steel products have an identification groove on D part.
Locating pins for circuit boards with shorter B fixed dimension are also available.

■Material Specification Table

Material No.	Material	Surface Treatment	Hardness	P Dimension Configurable		P/L/B Dimension Configurable
				Type	Shape Code	Type	Shape Code
①	Alloy tool steel or bearing steel	-	Quenching hardness 60～63HRC	E-JPQS	TA(Round) TD(Diamond)	E-FPQS	TA(Round) TD(Diamond)
②	Alloy tool steel or bearing steel	Hard Chrome Plated	Quenching hardness 50～55HRC Plating hardness 750HV～	E-GJPQS		E-GFPQS
③	Austenitic stainless steel	-	-	E-SJPQS		E-SFPQS
⑤	Martensitic stainless steel	-	Quenching hardness 50～55HRC	E-CJPQS		E-CFPQS

Part Number						P							L		B		M (Coarse Thread)	ℓ	(W)
Type	Shape	D			D Dimension Tolerance g7
		P, L, B Configurable	P Configurable	P Fixed		Dimension Configurable (0.01mm increments)	Dimension Fixed (Selectable)						P, L, B Configurable (1mm increments)	P Configurable /P Fixed	P, L, B Configurable (0.1mm increments)	P Configurable /P Fixed
P Dimension Configurable E-JPQS E-GJPQS E-SJPQS E-CJPQS P, L, B Configurable E-FPQS E-GFPQS E-SFPQS E-CFPQS	TA (Round) TD (Diamond)	5	5	-	-0.004 -0.016	3.00～5.00	-						8~10	10	2.0~10.0	5	M2	3	1.2
		6	6	6		4.00～6.00	4	5					8(9)～17		2.0~15.0		M3	5	1.5
		6T	6T	-			-						8(9)～12		2.0~12.0		M2.6	4
		8	8	8	-0.005 -0.020	6.00～8.00			6	7			11(12)～21	15	2.0～30.0(15.0)	6	M5	8	1.8
		8T	-	-			-										M4	6
		10	10	10		7.00~10.00				7	8		11(12)～23		3.0～30.0(25.0)	8	M5	8	2.2
		10T	-	-			-						8(12)～23	-		-	M4	6
		12	12	-	-0.006 -0.024	7.00~12.00	-						12～24	15	3.0～30.0(25.0)	8	M5	8	2.5
		12T	-	-			-						8(12)～18	-		-	M4	6
		13	13	13		8.00~13.00					8	10	13(14)～26	22	5.0～30.0(25.0)	8	M8	10	3
		13T	-	-			-						10(14)～20	-		-	M6	9
		16	16	16		10.00~16.00						10	16～32	22	5.0~30.0	10	M8	12	4
		16T	-	-			-						10(14)～24	-		-	M6	9
		20	20	-	-0.007 -0.028	13.00~20.00	-						20～40	30	5.0~30.0	10	M8	12	5
		20T	-	-			-						12(18)～30	-		-	M6	9

TB (Round) only applies to P Dimension Fixed.
B dimension in ( ) applies to Diamond Shape.
Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
L dimension in ( ) applies to Diamond Shape.
Note the strength of under-head part.Strength Reference for Under-head Part
Please confirm pilot hole depth.Pilot Hole Depth Reference. Holes may go through.

①Dimensional tolerance and fit parameter table For details, click Dimensional Tolerance Fit Table
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click Table of Dimensions Without Indicated Tolerance
③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical data Torque Reference Table, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.

①Positioning technology reference information Click Positioning Technology Reference
②Surface treatment related anti-rust ability salt spray test reference Click Anti-rust Treatment Reference for Metal Surface