Locating Pins Large Head, Spherical, Threaded
Brand :
MISUMI
Caution
Product Description
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview
The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head spherical threaded type is easy to install, enables smooth insertion, and used widely.
Dimensional Drawing
■Material Specification Table
Hard chrome plating: Plating hardness 750HV～
If there are requirements on rust prevention, give priority to the hard-chrome plated or austenitic stainless steel products.
Please understand that E-GJPQN, E-HJPQN and E-HFPQN series products are temporarily not available in the diamond shape.
Please visit MISUMI website for details of the models available for sale.
| Material No. |  Material |  Surface Treatment |  Hardness | Type | Shape Code | ||||
| P Dimension Fixed | P Dimension Configurable | P/L/B Dimension Configurable | P/L/B/ML Dimension Configurable | P Dimension Fixed | Other than P Dimension Fixed | ||||
| ① | SKS3 Equivalent | - | Quenching hardness 60～63HRC | E-JPQN | E-JPQN | E-FPQN | E-FPQNL | BB(Round) | A(Round) D(Diamond) |
| ② | SKS3 Equivalent | Hard Chrome Plated | Quenching hardness 50～55HRC | - | E-GJPQN | E-GFPQN | E-GFPQNL | ||
| ③ | SUS304 Equivalent | - | - | E-SJPQN | E-SJPQN | E-SFPQN | E-SFPQNL | ||
| ④ | SUS304 Equivalent | Hard Chrome Plated | - | - | E-HJPQN | E-HFPQN | - | ||
| ⑤ | SUS440C Equivalent | - | Quenching hardness 50～55HRC | E-CJPQN | E-CJPQN | E-CFPQN | E-CFPQNL | ||
| ⑥ | SKS3 Equivalent | Buffed | Quenching hardness 60～63HRC | - | E-MJPQN | E-MFPQN | E-MFPQNL | ||
| ⑦ | SKS3 Equivalent | Hard Chrome Plated + Buffed | Quenching hardness 60～63HRC | - | E-MGJPQN | E-MGFPQN | E-MGFPQNL | ||
| ⑧ | SUS440C Equivalent | Buffed | Quenching hardness 50～55HRC | - | E-MCJPQN | E-MCFPQN | E-MCFPQNL | ||
Hard chrome plating: Plating hardness 750HV～If there are requirements on rust prevention, give priority to the hard-chrome plated or austenitic stainless steel products.Please understand that E-GJPQN, E-HJPQN and E-HFPQN series products are temporarily not available in the diamond shape.Please visit MISUMI website for details of the models available for sale.Specification Table
| Part Number |  P | L |  L1mm increments | B |  B0.1mm increments | M (Coarse Thread) | ML |  ML1mm increments | (W) | |||||||||||||||
 Type | Shape |  D | D Dimension Tolerance g7 | Fixed | Configurable 0.01mm increments | |||||||||||||||||||
| P Dimension Fixed E-JPQN E-SJPQN E-CJPQN | BB (Round) | 3 | -0.003 -0.012 | 4 | 5 | 6 | − | 2 | − | 5 | − | M3 | 4.5 | − | − | |||||||||
| 4 | +0.024 +0.012 | 5 | 6 | 7 | 6 | M4 | 6 | |||||||||||||||||
| 5 | 6 | 7 | 8 | 3 | M5 | 7.5 | ||||||||||||||||||
| 6 | 7 | 8 | 9 | 10 | 8 | M6 | 9 | |||||||||||||||||
| 8 | +0.030 +0.015 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 12 | |||||||||||||||
| 10 | 11 | 12 | 13 | 15 | 10 | M10 | 15 | |||||||||||||||||
| 12 | +0.036 +0.018 | 15 | 16 | 8 | M12 | 18 | ||||||||||||||||||
| P Dimension Configurable E-JPQN E-GJPQN E-SJPQN E-HJPQN E-CJPQN (Buffed) E-MJPQN E-MGJPQN E-MCJPQN | A (Round) D (Diamond) | 3 | -0.003 -0.012 | − | 3.50~6.00 | 2 | − | 5 | − | M3 | 4.5 | − | 1.5 | |||||||||||
| 4 | +0.024 +0.012 | 4.50~7.00 | 6 | M4 | 6 | 1.8 | ||||||||||||||||||
| 5 | 5.50~8.00 | 3 | M5 | 7.5 | 2.2 | |||||||||||||||||||
| 6 | 6.50~10.00 | 8 | M6 | 9 | 3.0 | |||||||||||||||||||
| 8 | +0.030 +0.015 | 9.00~13.00 | 5 | M8 | 12 | 3.5 | ||||||||||||||||||
| 10 | 11.00~15.00 | 10 | M10 | 15 | 4.0 | |||||||||||||||||||
| 12 | +0.036 +0.018 | 13.00~18.00 | 8 | M12 | 18 | 5.0 | ||||||||||||||||||
| 16 | 17.00~25.00 | M16 | 24 | 7.0 | ||||||||||||||||||||
| 20 | +0.043 +0.022 | 22.00~30.00 | 10 | 15 | M20 | 30 | 9.0 | |||||||||||||||||
| P/L/B Dimension Configurable E-FPQN E-GFPQN E-SFPQN E-HFPQN E-CFPQN (Buffed) E-MFPQN E-MGFPQN E-MCFPQN Applicable when D≥5 | A (Round) D (Diamond) | 3 | -0.003 -0.012 | − | 3.50～ 8.00 | − | 0～ 6 | − | 2.0~10.0 | M3 | 4.5 | − | 1.5 | |||||||||||
| 4 | +0.024 +0.012 | 4.50～ 8.00 | 0～ 8 | 2.0~10.0 | M4 | 6 | 1.8 | |||||||||||||||||
| 5 | 5.50～ 8.00 | 0~10 | 2.0～15.0(10.0) | M5 | 7.5 | 2.2 | ||||||||||||||||||
| 6 | 6.50~10.00 | 0~10 | 2.0~15.0 | M6 | 9 | 3 | ||||||||||||||||||
| 8 | +0.030 +0.015 | 8.50~15.00 | 0~10 | 2.0～30.0(15.0) | M8 | 12 | 3.5 | |||||||||||||||||
| 10 | 11.00~17.00 | 0~15 | 3.0～30.0(25.0) | M10 | 15 | 4 | ||||||||||||||||||
| 12 | +0.036 +0.018 | 13.00～20.00(18.00) | 0~15 | 3.0～30.0(25.0) | M12 | 18 | 5 | |||||||||||||||||
| 16 | 17.00~27.00 | 0~20 | 5.0~30.0 | M16 | 24 | 7 | ||||||||||||||||||
| 20 | +0.043 +0.022 | 22.00~30.00 | 0~20 | 5.0~30.0 | M20 | 30 | 9 | |||||||||||||||||
| P/L/B/ML Dimension Configurable E-FPQNL E-GFPQNL E-SFPQNL E-CFPQNL (Buffed) E-MFPQNL E-MGFPQNL E-MCFPQNL Applicable when D≥5 | A (Round) D (Diamond) | 3 | -0.003 -0.012 | - | 3.50～ 8.00 | − | 0～ 6 | − | 2.0~10.0 | M3 | − | 3～ 9 | 1.5 | |||||||||||
| 4 | +0.024 +0.012 | 4.50～ 8.00 | 0～ 8 | 2.0~10.0 | M4 | 4~12 | 1.8 | |||||||||||||||||
| 5 | 5.50～ 8.00 | 0~10 | 2.0～15.0(10.0) | M5 | 5~15 | 2.2 | ||||||||||||||||||
| 6 | 6.50~10.00 | 0~10 | 2.0~15.0 | M6 | 6~18 | 3 | ||||||||||||||||||
| 8 | +0.030 +0.015 | 8.50~15.00 | 0~10 | 2.0～30.0(15.0) | M8 | 8~24 | 3.5 | |||||||||||||||||
| 10 | 11.00~17.00 | 0~15 | 3.0～30.0(25.0) | M10 | 10~30 | 4 | ||||||||||||||||||
| 12 | +0.036 +0.018 | 13.00～20.00(18.00) | 0~15 | 3.0～30.0(25.0) | M12 | 12~30 | 5 | |||||||||||||||||
| 16 | 17.00~27.00 | 0~20 | 5.0~30.0 | M16 | 16~40 | 7 | ||||||||||||||||||
| 20 | +0.043 +0.022 | 22.00~30.00 | 0~20 | 5.0~30.0 | M20 | 20~40 | 9 | |||||||||||||||||
P, L or B dimension in ( ) applies to Diamond Shape.The incomplete threaded section exists when L=0.* The tightening torque (reference value) is the strength class (8.8) in the technical data, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.
P/L/B/ML configurable: The length of threaded section (ML) can be specified within the range of M×1～M×3 (max.).Please understand that E-GJPQN, E-HJPQN and E-HFPQN series products are temporarily not available in the diamond shape.Product Features
Precautions
①Dimensional tolerance and fit parameter table For details, click 
here
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, clickhere
③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical datahere, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.
here②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click
here③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical data
here, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.Example of Use
Example introduction: Round and diamond types combined for positioning
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart Phones | Electronic & Electrical | Robotics | ||
 |  |  |
Related Products
| Bushings for Locating Pins, Shouldered | Bushings for Locating Pins, Straight | Bushings for Locating Pins, Slotted Hole, Shouldered | ||
 |  |  | ||
| Representative model: JBH6-8 | Representative model: JBA3-8 | Representative model: JBPE10-P6.8-W4.82-L15 |
Related Documents