Pivot Pins Shouldered, Hex Socket Head, Tapped

The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

The dimension of the relief groove on the shoulder and neck is a reference value.
For L Dimension, common cutting and machining tolerances (medium class) are used.

・Material Table

Type	Equivalent Material	Hardness	Surface Treatment
E-CLBRM	General structural steel or carbon steel	-	Ferroferric Oxide Protective Film
E-CLBRHM		HRC40～
E-PCLBRM		-	Electroless Nickel Plating
E-PCLBRHM		HRC40～
E-GCLBRM		Plating hardness 750HV～	Hard Chrome Plated
E-SCLBRM	Austenitic stainless steel	-	-
E-SCLBRHM	Martensitic stainless steel	HRC45～

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.

Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Products made of austenitic stainless steel with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 3: Freely selectable in 0.1mm increments to accommodate different use environments.

①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
 Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 nut, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.