Pivot Pins Shouldered, Lock Nut

The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

This type may have centering holes depending on dimensions.
The dimension of the relief groove on the shoulder and neck is a reference value.
For L Dimension, common cutting and machining tolerances (medium class) are used.
E-CLBGN, E-CLBGNU, E-PCLBGN and E-PCLBGNU have identification grooves on the side in order to distinguish them from the hardened type.

・Material Table

Type		Equivalent Material	Hardness	Surface Treatment	Accessory (1 pcs)
L Dimension Configurable					Standard Nut	U-Nut
Standard Nut	U-Nut
E-CLBGN	E-CLBGNU	General Structural Steel or Carbon Steel L Dimension Fixed General Structural Steel or Carbon Steel	-	Ferroferric Oxide Protective Film	SWRCH	SS400 (UNUTK)
E-CLBGHN	E-CLBGHNU		HRC40～
E-PCLBGN	E-PCLBGNU		-	Electroless Nickel Plating	Austenitic stainless steel	Austenitic stainless steel (UNUTS)
E-PCLBGHN	E-PCLBGHNU		HRC40～
E-GCLBGN	-		Plating hardness 750HV～	Hard Chrome Plated	SWRCH	SS400 (UNUTK)
E-SCLBGN	E-SCLBGNU	Austenitic stainless steel	-	-	Austenitic stainless steel	Austenitic stainless steel (UNUTS)
E-SCLBGHN	E-SCLBGHNU	Martensitic stainless steel	HRC45～

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.
For U-Nut specifications, clickU-Nut

Part Number		L	A	B	T	F	u	(n)	M (Coarse Thread)	Attached Nut
Type	D	L Dimension Selection (0.1mm increments)
L Dimension Configurable Standard Nut E-CLBGN E-CLBGHN E-PCLBGN E-PCLBGHN E-GCLBGN E-SCLBGN E-SCLBGHN U-Nut E-CLBGNU E-CLBGHNU E-PCLBGNU E-PCLBGHNU E-SCLBGNU E-SCLBGHNU	4	5.0~50.0	7	5	3	6	3.9	1.5	M3	M3×0.5
	5	5.0~60.0	9	7	4		4.9		M4	M4×0.7
	6	10.0~100.0	10	8	5	9	5.8		M5	M5×0.8
	8		13	10			7.8		M6	M6×1.0
	10		16	13		12	9.8		M8	M8×1.25
	12	15.0~150.0	18	14		16	11.8		M10	M10×1.5
	13	20.0~150.0	24	21		18	12.8		M12	M12×1.75
	14						13.8
	15						14.8
	16	20.0~150.0					15.8
	17						16.8
	18					24	17.8
	20		27	23			19.8		M16	M16×2.0
	22						21.8
	25		30	27			24.8
	30	40.0~150.0	35	32		30	29

E-SCLBGHN and E-SCLBGHNU may be discolored due to hardening.

Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Feature 5: The L Dimension Fixed type is available at a relatively low price.

①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
 Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 nut, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.