(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
· Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
· Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
· Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
SL-□□ | Degreasing | Anti-Rust Packing | Oil removal | General Environment | Regular assembly process |
Post battery assembly process | |||||
SH-□□ | Precision Cleaning | Degassing Double Packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
SHD-□□ | Electrolytic polishing + precision cleaning | Degassing Double Packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
Standard![]() | Short![]() |
* d1, d2 Identical Diameter = d1 + 0.5
d1, d2 Different Diameters = Large Shaft Diameter + 0.5
Type | [M] Material | Cleaning Method | |||||
Standard | Short | Main Body | Hex Socket Head Cap Screw | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
SL-CPLSC | SL-CPSSC | Stainless steel | Stainless steel | Degreasing | General Environment | Anti-Rust Packing | General Environment |
SH-CPLSC | SH-CPSSC | Precision Cleaning | Class 1,000 | Degassing Double Packing | Class 10 |
Part Number | — | Shaft Bore Dia. d1 | — | Shaft Bore Dia. d2 |
SL-CPLSC16 | — | 5 | — | 6 |
SH-CPSSC20 | — | 6 | — | 6 |
Part Number | d1 | d2 | L | ℓ | M (Coarse) | A | F | Slip Torque (N⋅m) | Available Size | ||||||||||||||||||||
Type | D | Standard | Short | Standard | Short | Standard | Short | Standard | Short | SL-CPLSC | SH-CPLSC | SL-CPSSC | SH-CPSSC | ||||||||||||||||
Standard SL-CPLSC SH-CPLSC Short SL-CPSSC SH-CPSSC | 12 | * 4 | *4 | *5 | 18.5 | 14 | 5 | 5.2 | M2 | 4 | 2.5 | 2.6 | — | — | ● | ● | ● | ● | |||||||||||
* 5 | *5 | ||||||||||||||||||||||||||||
16 | * 5 | *5 | *6 | 23 | 18 | 6.5 | 6.8 | M2.5 | 5 | 3.25 | 3.4 | — | — | ● | ● | ● | ● | ||||||||||||
* 6 | *6 | ||||||||||||||||||||||||||||
20 | * 5 | *6 | 6.35 | *8 | 26 | 20 | 7.5 | 7.65 | 6.5 | 3.75 | 3.8 | — | 0.9 | ● | ● | ● | ● | ||||||||||||
* 6 | *6 | 6.35 | 7 | *8 | — | ||||||||||||||||||||||||
6.35 | 8 | ||||||||||||||||||||||||||||
* 8 | *8 | ||||||||||||||||||||||||||||
25 | * 5 | *6 | 31 | 25 | 8.5 | 9.6 | M3 | 9 | 4.25 | 4.8 | 0.7 | 1.2 | ● | ● | ● | ● | |||||||||||||
* 6 | *6 | 6.35 | *8 | *10 | 0.7 | 1.4 | |||||||||||||||||||||||
6.35 | 8 | 10 | 0.9 | — | |||||||||||||||||||||||||
* 8 | *8 | 9.525 | *10 | 1.7 | 1.9 | ||||||||||||||||||||||||
9.525 | 10 | — | — | ||||||||||||||||||||||||||
* 10 | *10 | ||||||||||||||||||||||||||||
32 | * 8 | *8 | 9.525 | *10 | 12 | 41 | 32 | 12 | 12.6 | M4 | 11 | 6 | 6.3 | 1.2 | 1.9 | ● | ● | ● | ● | ||||||||||
9.525 | 10 | 12 | 2.1 | 2.4 | |||||||||||||||||||||||||
* 10 | *10 | 11 | *12 | 14 | 2.7 | 3.4 | |||||||||||||||||||||||
* 12 | *12 | *14 | 2.9 | — | |||||||||||||||||||||||||
40 | 8 | 8 | 10 | 56 | — | 17 | — | M5 | 14 | 8.5 | — | — | — | ● | ● | — | — | ||||||||||||
10 | 10 | ||||||||||||||||||||||||||||
12 | 12 | 14 | |||||||||||||||||||||||||||
14 | 14 | 16 | |||||||||||||||||||||||||||
15 | 15 | ||||||||||||||||||||||||||||
16 | 16 |
Part Number | Allowable Torque (N⋅m) | Max. Rotational Speed (r/min) | Moment of Inertia (kg⋅m2) | Static Torsional Spring Constant (N·m/rad) | Allowable Lateral Misalignment (mm) | Allowable Angular Misalignment (°) | Allowable Axial Misalignment (mm) | Screw Tightening Torque (N⋅m) | Mass (g) | |
Type | D | |||||||||
SL-CPLSC SH-CPLSC | 12 | 0.3 | 52000 | 2.2 × 10−7 | 64 | 0.1 | 2 | ±0.2 | 0.5 | 10 |
16 | 0.5 | 39000 | 9.0 × 10−7 | 85 | ±0.3 | 1 | 25 | |||
20 | 1 | 31000 | 2.5 × 10−6 | 250 | 43 | |||||
25 | 2 | 25000 | 7.1 × 10−6 | 330 | 0.15 | ±0.4 | 1.5 | 78 | ||
32 | 3.5 | 19000 | 2.7 × 10−5 | 850 | ±0.5 | 2.5 | 170 | |||
40 | 8 | 15000 | 9.0 × 10−5 | 1000 | 0.2 | 4 | 370 |
Part Number | Allowable Torque (N⋅m) | Max. Rotational Speed (r/min) | Moment of Inertia (kg⋅m2) | Static Torsional Spring Constant (N·m/rad) | Allowable Angular Misalignment (°) | Allowable Axial Misalignment (mm) | Screw Tightening Torque (N⋅m) | Mass (g) | |
Type | D | ||||||||
SL-CPSSC SH-CPSSC | 12 | 0.3 | 52000 | 1.8 × 10−7 | 140 | 1 | ±0.1 | 0.5 | 8.5 |
16 | 0.5 | 39000 | 7.8 × 10−7 | 240 | 1 | 21 | |||
20 | 1 | 31000 | 2.1 × 10−6 | 330 | 38 | ||||
25 | 2 | 25000 | 6.3 × 10−6 | 720 | ±0.2 | 1.5 | 69 | ||
32 | 3.5 | 19000 | 2.2 × 10−5 | 1300 | 2.5 | 150 |
Alteration: Code | Shaft Bore Dia. | Applicable Conditions | Ordering Example | |||||||||||||
LDC (Left Shaft) | ![]() | 0.5 mm Increments Applicable to 6.35, 9.525 or 12.7 [Ordering Code] Specify d1 with LDC, d2 with RDC Example: LDC4.5, RDC9.525 Clamping
| [ ! ] LDC and RDC tolerance are values before slit machining. [ NG ] Combination with LDC and RDC are not available [NG] Not applicable to Clamping Type D = 40 | SL-CPLSC25-LDC6.5-8 | ||||||||||||
RDC (Right Shaft) | SH-CPSSC32-8-RDC9.525 |
Working Environment: General environment
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Alkaline warm pure water | Ultrasonic pure water cleaning after cleaning with pure water *3 times | Dry | Anti-rust single packing |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Hydrocarbon cleaning Ro water cleaning | Wash with pure water (10 MΩ·cm)after high- pressure water jet cleaning (Ro water) | Use pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Hydrocarbon cleaning Ro water cleaning | Electrolytic polishing with an electrolytic polishing layer according to the material | Wash with pure water (10 MΩ·cm) after high- pressure water jet cleaning (Ro water) | Use warm pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean benchin a Class 10 clean environment |
For degreasing: (Part Number: SL-□□) ![]() | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□) ![]() [ ! ]Both the first and second layer packaging are degassed. |
Cleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
---|---|---|---|---|---|
Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
Post battery assembly process | |||||
Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
Part Number |
---|
SH-CPLSC40-[8,10,12,14,15,16]-[8,10,12,14,15,16] |
SL-CPLSC40-[8,10,12,14,15,16]-[8,10,12,14,15,16] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Shaft Bore Dia. 1 d1 (or d) (Ø) | Shaft Bore Dia. 2 d2 (or d) (Ø) | O.D. (Ø) | Overall Length (mm) | Allowable Torque Range (N•m) | Allowable Misalignment | Max. Rotational Speed Range (r/min) | Allowable Torque (N•m) | Allowable Angular Misalignment (deg) | Allowable Lateral Misalignment (mm) | Allowable Lateral Misalignment Range (mm) | Max. Rotational Speed (r/min) | Allowable Axial Misalignment (mm) | Moment of Inertia (kg・m2) | Cleaning Method | Characteristics/Applications | Standard/Short | d1 Hole Diameter Alteration [LDC] 0.5 mm Increments | d2 Hole Diameter Alteration [RDC] 0.5 mm Increments |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | CLEAN_COUPLING | 1 Piece(s) | 9 Day(s) | 8 ~ 16 | 8 ~ 16 | 40 | 56 | 5.01~10.00 | Angular Misalignment / Eccentricity / Axial Misalignment | 2001~4000 | 8 | 2 | 0.2 | 0.02~0.2 | 15000 | +0.5/-0.5 | 9.0×10-5 | Precision Cleaning | Clean washed / Low Dust Generation / Vacuum / Corrosion resistance/chemical resistance / Heat resistance | Standard | - | - | ||
- | CLEAN_COUPLING | 1 Piece(s) | 9 Day(s) | 8 ~ 16 | 8 ~ 16 | 40 | 56 | 5.01~10.00 | Angular Misalignment / Eccentricity / Axial Misalignment | 2001~4000 | 8 | 2 | 0.2 | 0.02~0.2 | 15000 | +0.5/-0.5 | 9.0×10-5 | Degreasing | Clean washed / Vacuum / Corrosion resistance/chemical resistance / Heat resistance | Standard | - | - |
Loading...
Application | Standard | Features | Zero Backlash / Low Moment of Inertia | Product Category | Coupling Main Body |
---|---|---|---|---|---|
Environmentally friendly | RoHS Compliant (10 Substances) |
How can we improve?
How can we improve?