Slit Couplings Long, Set Screw Type
Brand :
MISUMI
Caution
Product Description
Slit Couplings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Shaft Hole Diameter Minimum/Maximum (mm.): 3 and 60
● Outside Diameter Minimum/Maximum (mm.): 14 and 105
● Overall Length Minimum/Maximum (mm.) : 22 and 140
● Material :Aluminum Alloy
● Surface Treatment : Clear Anodized
[Application]
Slit Couplings are commonly used in various applications in factory automation systems
Product Overview
■ Feature
・Flexible Shaft Couplings zero backlash
・Flexible Shaft Couplings with completely integrated structure, featuring slits in cylindrical hub.
・Flexible Shaft Couplings extremely high torsional stiffness and low moment of inertia.
・The leaf springs formed by the slits allow for eccentricity, angular misalignment, and Axial Misalignment.
・Flexible Shaft Couplings suitable for use in actuators, precision XY stages, indexing tables, etc.
・Flexible Shaft Couplings zero backlash
・Flexible Shaft Couplings with completely integrated structure, featuring slits in cylindrical hub.
・Flexible Shaft Couplings extremely high torsional stiffness and low moment of inertia.
・The leaf springs formed by the slits allow for eccentricity, angular misalignment, and Axial Misalignment.
・Flexible Shaft Couplings suitable for use in actuators, precision XY stages, indexing tables, etc.
Dimensional Drawing
Material table
| Type |  Material |  Surface Treatment |  Accessory |
| E-LMPL | Aluminum Alloy | Clear Anodized | Set Screw |
Specification Table
Please follow the selection steps
～
to select the part no. Specify Shaft Hole Dia. in therange d1≤d2.
If the slip torque is less than the allowable torque, use under the slip torque.
*L dimension updated in March 2024
*F dimension and M Set Screw size updated in March 2024
～
to select the part no. Specify Shaft Hole Dia. in therange d1≤d2.Part No.(Type· D) | - |  d1 | - | d2 |
| E-LMPL12 | - | 3 | - | 4 |
| E-LMPL20 | - | 5 | - | 6 |
| Part No. | d1、d2 Shaft Hole Dia. (d1≤d2) | L | ||||||||||||||||||||||||||||
| Type | D | |||||||||||||||||||||||||||||
| E-LMPL | 12 | 3 | 4 | 5 | 6 | 18.5 | ||||||||||||||||||||||||
| 16 | 3 | 4 | 5 | 6 | 6.35 | 7 | 8 | 23 | ||||||||||||||||||||||
| 20 | 4 | 5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 26* | ||||||||||||||||||||
| 25 | 5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 31* | |||||||||||||||||||
| 32 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 41* | ||||||||||||||||||||
| 40 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 56 | ||||||||||||||||||
| 50 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 71 | |||||||||||||||
| 63 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | 40 | 90 | |||||||||||||
If the slip torque is less than the allowable torque, use under the slip torque.*L dimension updated in March 2024| Part No. | L | F | Set Screw | Rated Torque | Mass | ||
| Type | D | M | Tightening Torque (N.m) | (N.m) | g | ||
| E-LMPL | 12 | 18.5 | 2.5 | M2.5 | 0.5 | 0.4 | 3.7 |
| 16 | 23 | 3.0 | M3 | 0.7 | 0.5 | 8.1 | |
| 20 | 25 | 3.0 | M3 | 0.7 | 1 | 14 | |
| 25 | 30 | 4.0 | M4 | 1.7 | 2 | 27 | |
| 32 | 40 | 5.0* | M5* | 1.7 | 4 | 60 | |
| 40 | 56 | 6.0* | M6* | 4.0 | 8 | 130 | |
| 50 | 71 | 8.0* | M6 | 7.0 | 13 | 266 | |
| 63 | 90 | 12.0* | M8* | 15.0 | 22 | 500 | |
*F dimension and M Set Screw size updated in March 2024Product Features
Flexible Shaft Couplings with zero backlash, this product is suitable for applications where rotational accuracy is required.
Precautions
■ Calibration adjustment
1. The coupling allows transmission of axis deviation, rotation angle and torque, but if the axis deviation exceeds the allowable value, vibration may occur or the lifespan will be drastically reduced. Please be sure to make corrections.
2. Axial deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the axes).
Perform calibration adjustment for the shaft so that the shaft center deviation is below the allowable value specified in the product dimensions and performance table.
3. The axial deviation tolerance values stated in the dimensions and performance tables refer to the situation when one of eccentricity, declination, and axial amplitude occurs individually. If two or more axial deviations occursimultaneously, the respective allowable values are reduced by half.
4. Axial deviation not only occurs when assembling the device, but is also a major cause of vibration, thermal expansion, and bearing wear during operation.
It is recommended that the axis deviation be set to less than 1/3 of the allowable value.
1. The coupling allows transmission of axis deviation, rotation angle and torque, but if the axis deviation exceeds the allowable value, vibration may occur or the lifespan will be drastically reduced. Please be sure to make corrections.
2. Axial deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the axes).
Perform calibration adjustment for the shaft so that the shaft center deviation is below the allowable value specified in the product dimensions and performance table.
3. The axial deviation tolerance values stated in the dimensions and performance tables refer to the situation when one of eccentricity, declination, and axial amplitude occurs individually. If two or more axial deviations occursimultaneously, the respective allowable values are reduced by half.
4. Axial deviation not only occurs when assembling the device, but is also a major cause of vibration, thermal expansion, and bearing wear during operation.
It is recommended that the axis deviation be set to less than 1/3 of the allowable value.
Example of Use
