How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(18 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-LBHS5

Inscribed Circle Dia. dr Overall Length L Outer Dia. D Height H Dowel Hole Dimensions type CAD Days to Ship

Specification/Dimensions

Inscribed Circle Dia. dr(Ø)
5

6

8

10

12

13

16

20

25

30
Clear
Overall Length L(mm)
25

27

32

39

40

42

47

52

69

74
Clear
Outer Dia. D(Ø)
10

12

15

19

21

23

28

32

40

45
Clear
Height H(mm)
20

22

26

32

34

43

49

54

65

71
Clear
Dowel Hole Dimensions(mm)
- 3
- 4
- 5
- Not provided
Clear
type
- E-LBHS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

6 Day(s) or Less
Clear

Specify Alterations

Linear Bushing Housing Units With Dowel Holes-Tall Blocks, Single

Compare This Product

Volume Discount

Check FAQ of this product (2)

Brand :

MiSUMi C-VALUE

Part Number :

E-LBHS5

E-LBHS6

E-LBHS8

E-LBHS8-P

E-LBHS10

E-LBHS10-P

E-LBHS12

E-LBHS12-P

E-LBHS13

E-LBHS13-P

E-LBHS16

E-LBHS16-P

E-LBHS20

E-LBHS20-P

E-LBHS25

E-LBHS25-P

E-LBHS30

E-LBHS30-P

E-LBHS5

From :

฿ 240.26/Unit
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)Caution

Download Free! >>Economy Series Catalog ver2023 (TH-EN)_Part02 CLICK here

Product Description

Linear Bushing Housing Units are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Inner Diameter Minimum/Maximum (mm.) : 5 and 30
● Overall Length Minimum/Maximum (mm.) : 25 and 74
● Dowel Hole : Can selected between Provided / Not Provided
● Operating Temperature (℃) : -20 to 80
● Material : Housing - Aluminum Alloy
● Surface Treatment: Anodized
[Application]
Linear Bushing Housing Units are commonly used in various applications in factory automation systems

Product Overview

The housing unit type is a linear motion guiding mechanism matched with linear shaft, which has built-in linear bushing in the aluminum alloy case.
Resin retainers are available in black and yellow, with the same performance. Please feel free to use.

Product Features

Feature 1: Good interchangeability. Built-in linear bushings have good interchangeability because they can be used with shafts randomly.
Feature 2: Appropriate specifications can be selected according to the conditions of use.
Feature 3: Reduced number of parts and machining time.

Dimensional Drawing

Housing		Ambient Operating Temp
Material	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

The interior of the dowel hole is not anodized.

Specification Table

Part Number			With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d₁×t
Type	dr	Tolerance	With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d₁×t
E-LBHS	5	+0.003 -0.012	Not Specified (Without Dowel Hole)	10	4	25	16	7	13	15	20	5	M4 (8)	M4 (10)	－	(1)	6×5 (For M3 Bolts)
	6		Not Specified (Without Dowel Hole)	12	3	27	18	9	14	16	22		M4 (8)	M4 (11)	4
	8		Not Specified (Without Dowel Hole) P (With Dowel Hole)	15	3	32	20	10	16	20	26		M5 (8.5)	M4 (15)	5
	10			19	4	39	27	15	19	26	32	6	M6 (9.5)	M5 (20)	6		8×6 (For M4 Bolts)
	12			21		40	27	15	20	28	34	6	M6 (9.5)	M5 (22)	6		8×6 (For M4 Bolts)
	13			23		42	28	16	25	30	43	7	M6 (13)	M6 (23)	－		9×7 (For M5 Bolts)
	16			28	3.8	47	32	18	27	36	49	7	M6 (13)	M6 (29)	8		9×7 (For M5 Bolts)
	20	+0.003 -0.013		32	3.8	52	36	18	31	42	54	8	M8 (15)	M8 (34)	－		11×8 (For M6 Bolts)
	25			40	3.2	69	42	22	37	52	65	9	M10 (17)	M10 (42)	－		14×10 (For M8 Bolts)
	30			45	3.2	74	44	22	40	58	71	9	M10 (17.5)	M10 (48)	－		14×10 (For M8 Bolts)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
E-LBHS5
E-LBHS6
E-LBHS8
E-LBHS8-P
E-LBHS10
E-LBHS10-P
E-LBHS12
E-LBHS12-P
E-LBHS13
E-LBHS13-P
E-LBHS16
E-LBHS16-P
E-LBHS20
E-LBHS20-P
E-LBHS25
E-LBHS25-P
E-LBHS30
E-LBHS30-P

Price	Name	Minimum Order Qty.	Volume Discount	Days to Ship	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Dia. D (Ø)	Height H (mm)	Dowel Hole Dimensions (mm)
฿ 318.18	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	5	25	10	20	Not provided
฿ 240.26	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	6	27	12	22	Not provided
฿ 240.91	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	Same day	8	32	15	26	Not provided
฿ 329.22	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	8	32	15	26	3
฿ 270.78	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	Same day	10	39	19	32	Not provided
฿ 359.74	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	10	39	19	32	4
฿ 292.21	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	12	40	21	34	Not provided
฿ 380.52	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	12	40	21	34	4
฿ 333.77	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	13	42	23	43	Not provided
฿ 420.78	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	13	42	23	43	4
฿ 485.71	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	16	47	28	49	Not provided
฿ 591.56	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	16	47	28	49	4
฿ 537.66	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	20	52	32	54	Not provided
฿ 642.86	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	20	52	32	54	5
฿ 626.62	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	Same day	25	69	40	65	Not provided
฿ 731.82	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	25	69	40	65	5
฿ 758.44	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	30	74	45	71	Not provided
฿ 830.52	ECONOMY LINEAR BUSHING	1 Piece(s)	Available	6 Day(s)	30	74	45	71	5

Dimensional Drawing

Specification Table

Part Number			With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d₁×t
Type	dr	Tolerance	With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d₁×t
E-LBHS	5	+0.003 -0.012	Not Specified (Without Dowel Hole)	10	4	25	16	7	13	15	20	5	M4 (8)	M4 (10)	－	(1)	6×5 (For M3 Bolts)
	6		Not Specified (Without Dowel Hole)	12	3	27	18	9	14	16	22		M4 (8)	M4 (11)	4
	8		Not Specified (Without Dowel Hole) P (With Dowel Hole)	15	3	32	20	10	16	20	26		M5 (8.5)	M4 (15)	5
	10			19	4	39	27	15	19	26	32	6	M6 (9.5)	M5 (20)	6		8×6 (For M4 Bolts)
	12			21		40	27	15	20	28	34	6	M6 (9.5)	M5 (22)	6		8×6 (For M4 Bolts)
	13			23		42	28	16	25	30	43	7	M6 (13)	M6 (23)	－		9×7 (For M5 Bolts)
	16			28	3.8	47	32	18	27	36	49	7	M6 (13)	M6 (29)	8		9×7 (For M5 Bolts)
	20	+0.003 -0.013		32	3.8	52	36	18	31	42	54	8	M8 (15)	M8 (34)	－		11×8 (For M6 Bolts)
	25			40	3.2	69	42	22	37	52	65	9	M10 (17)	M10 (42)	－		14×10 (For M8 Bolts)
	30			45	3.2	74	44	22	40	58	71	9	M10 (17.5)	M10 (48)	－		14×10 (For M8 Bolts)

dr	Dowel Hole Dimensions					Basic Load Rating		Mass (g)
dr	P	C	ℓ₂	E	F	C (Dynamic) N	Co (Static) N	Mass (g)
5	-	-	-	-	-	167	206	18
6	-	-	-	-	-	206	265	22
8	3	4	4	22	12	265	380	40
10	4	5	5	29	16	372	549	80
12				29	18	412	598	90
13				30	20	510	608	132
16				32		775	1180	204
20	5	6	6	36		882	1370	272
25				42	26	980	1570	574
30				44	30	1570	2740	710

* If any product with dowel holes is selected, 2 pieces of dowel holes will be delivered together.

Material Specification

Housing		Ambient Operating Temp
Material	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

The interior of the dowel hole is not anodized.

Usage Method

Product Drawings	Instructions for use
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions

■ When the linear bushing is subjected to large moment load (eccentric load), one piece of single type is not applicable, so it is recommended to use one piece of double type or multiple pieces of single type.
■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bushing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bushing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bushing is recommended to be installed on the holder with H7 tolerance. The linear bushing is in clearance fit with the housing.

Basic Information

Type	Housing	Style	Standard	Ball Recirculating Type	Single
Types	Linear Bushing Housing Unit - Tall Blocks	Length	Single

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question: How is linear bearing maintained regularly?: Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question: Comparison of antirust ability of linear bearings?: Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Top of the page

Payment Methods

Credit Card

Bank

Prompt Pay

Cash: Cash On Delivery

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 8:00 - 18:00 (Mon-Sat),*Order cut off time is 17:00 / Online order cut off time is 18:00

Tel:

033-684730
Email: cs@misumi.co.th

Chat Now

Electronic & Electrical	Automotive	Lithium battery

LCD	Smart Phones	Semiconductor

Categories

Search by Category

Categories

Search by Category

How can we improve?