Is the sensor shipped after installation?

The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.

Do actuators require regular maintenance?

Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.

Does the E-MUTB series come with a motor?

The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.

Can the belt actuator be used vertically?

The E-MUTB series European specification belt actuator can be used vertically. The actuator is not equipped with a reduction mechanism at the factory, so it is recommended to use a motor with reducer. Customers can choose the brand they trust to use based on their actual situation. Set the acceleration and deceleration to 0.5 for use.

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(5 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-M40-[C,D]

Effective Stroke Motor Position Motor Brand & Power Sensor Position type CAD

Specification/Dimensions

Effective Stroke(mm)
[100-5500/100mm Unit(s)]
Clear
Motor Position
- L Motor On Left Side
- LD Motor On Lower Left Side
- LU Motor On Upper Left Side
- Motor Direct Connection On Left Side
- Motor Direct Connection On Right Side
- R Motor On Right Side
- RD Motor On Lower Right Side
- RU Motor On Upper Right Side
Clear
Motor Brand & Power
- M40 Mitsubishi 400W
- P40 Panasonic 400W
- T40 Delta 400W
- Y40 Yaskawa 400W
- Z Prepared by Customer
Clear
Sensor Position
- C Motor Side
- D Motor Opposite Side
Clear
type
- E-MUTB65
Clear
CAD
- 2D
- 3D
Clear

Specify Alterations

Single Axis Robots E-MUTB65, High Speed Belt Drive, Semi-Sealed Type(General Use)

Name: Single Axis Robots E-MUTB65, High Speed Belt Drive, Semi-Sealed Type(General Use)
Brand: MISUMI
Availability: PreOrder

Compare This Product

Check FAQ of this product (4)

Brand :

MISUMI

MiSUMi C-VALUE

MISUMI

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)Caution

Download Free! >>Economy Series Catalog ver2023 (TH-EN)_Part01 CLICK here

Product Description

- Single Axis Robots E-MUTB65, High-Speed Belt Drive, Semi-Sealed type for General Use from MISUMI.
- Transmission devices integrating timing belts and guides, essential for streamlined production.
- Versatile vertical use expands application possibilities.
- Precision of ±0.1mm ensures accuracy in operation.
- Roller design on the steel belt reduces susceptibility to dust contamination.
- Adjustable belt tension without disassembly for easy maintenance.
- Full range of supporting accessories included for a comprehensive setup.
- Motor not included must be purchased separately.

Product Overview

Economy series Aluminum Alloy Actuators are transmission devices integrating timing belts and guides, which are indispensable for the production process.
Precision up to ±0.1mm.

Dimensional Drawing

Material Specifications

Components	Body	Guide	Timing Belt	Timing Pulley	Slide Block	Cover
Material	Aluminum Alloy	Carbon Steel	Rubber	45 Steel	Aluminum Alloy	Aluminum Alloy
Surface Treatment	Anodized	－	－	Nickel Plated	Anodized	Anodized

Specification Overview

Specification Table

Type

Lead (mm)

Stroke
(100millimeters increments)

Motor Position

Motor Brand

Motor Power

Sensor Position

Repetitive Positioning
Accuracy
(mm)

Deceleration Ratio

Max. Payload (kg)

Max. Rotational Speed
(mm/sec)

Rated
Thrust (N)

Horizontal Use

Vertical Use

E-MUTB65

130

100~5500

L
(Motor On Left Side)
R
(Motor On Right Side)
LU
(Motor On Upper Left Side)
RU
(Motor On Upper Right Side)
LD
(Motor On Lower Left Side)
RD
(Motor On Lower Right Side)
LT
(Motor Direct Connection On Left Side)
RT
(Motor Direct Connection On Right Side)

M
(Mitsubishi)
P
(Panasonic)
Y
(Yaskawa)
T
(Delta Electronics)
Z
(Prepared by Customer)

40
(400W)

C
(External Motor Side)
D
(External Motor Opposite Side)

±0.1

3:1

2166

220

5:1

1300

7:1

928

10:1

650

Only includes the main unit, not the motor, which must be purchased separately.

If the belt breaks during vertical use, there is a risk of the load falling off, so please be careful.

The actuator is not fitted with a reducer, so we recommend using a motor with a reducer.

When selecting motor Z (selected by customer), please inform us of the motor type and, if necessary, provide drawings.

As the drawings are schematic diagrams, please confirm the detailed dimensions according to CAD data.

Motor acceleration & deceleration setting 0.5 sec.

Parameters of Use

■Sensing Line Wiring Diagram

■List of Recommended Servo Motors
Recommended Motor

■Motor Mounting Port

Product Features

1. Allows for vertical use.
2. Precision±0.1mm
3. Full range of supporting accessories
4. Easy maintenance, belt tension adjustable by adjusting the screw’s tightness without disassembly.
5. The addition of roller design to the steel belt makes it less prone to dust contamination.

Precautions

Precautions for use
■Avoid using single-axis drive products in the following environments
①Dusty environment (especially metal powder)
②Environment with splashing water and oil
③Near fire sources
④Environment with excessive organic solutions and salt
⑤Environment with direct sunlight and heat radiation
⑥Environment subject to strong vibration and shock
⑦Environment with corrosive gas, combustible gas

■Single-axis robot operating environment
Operating environment: normal temperature (no freezing, non-condensation)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-M40-[C,D]
E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-P40-[C,D]
E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-T40-[C,D]
E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-Y40-[C,D]
E-MUTB65-L130-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-Z-[C,D]

Price	Name	Minimum Order Qty.	Days to Ship	Effective Stroke (mm)	Motor Position	Motor Brand & Power	Sensor Position
-	ELECTRIC ACTUATOR COMPACT TYPE	1 Piece(s)	Quote	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	M40 Mitsubishi 400W	C Motor Side / D Motor Opposite Side
-	ELECTRIC ACTUATOR COMPACT TYPE	1 Piece(s)	Quote	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	P40 Panasonic 400W	C Motor Side / D Motor Opposite Side
-	ELECTRIC ACTUATOR COMPACT TYPE	1 Piece(s)	Quote	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	T40 Delta 400W	C Motor Side / D Motor Opposite Side
-	ELECTRIC ACTUATOR COMPACT TYPE	1 Piece(s)	Quote	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Y40 Yaskawa 400W	C Motor Side / D Motor Opposite Side
-	ELECTRIC ACTUATOR COMPACT TYPE	1 Piece(s)	Quote	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side

Basic Information

Type	Slider	Drive Method	Belt	Main Body, Peripheral Components	Main Body
Positioning Repeatability(µm)	±10	Cable	Not Provided	Number of Tables	1 pc.
Lead	130	Lead	130

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question: Is the sensor shipped after installation?: Answer: The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.
Question: Do actuators require regular maintenance?: Answer: Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.
Question: Does the E-MUTB series come with a motor?: Answer: The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.
Question: Can the belt actuator be used vertically?: Answer: The E-MUTB series European specification belt actuator can be used vertically. The actuator is not equipped with a reduction mechanism at the factory, so it is recommended to use a motor with reducer. Customers can choose the brand they trust to use based on their actual situation. Set the acceleration and deceleration to 0.5 for use.