(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
Post battery assembly process | |||||
SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
Type | Body Material | Cleaning Method | ||||
D Tol. f8 | [M] Material | [S]Surface Treatment | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
SL-PSSFGD | SUS304 | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10µ or more | Degreasing | General environment | Anti-rust packing | General environment |
SH-PSSFGD | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 |
Part Number | — | L | — | F | — | B | — | P | — | N |
SL-PSSFGD20 | — | 275 | — | F25 | — | B12 | — | P10 | — | N10 |
SH-PSSFGD25 | — | 375 | — | F25 | — | B12 | — | P12 | — | N12 |
D Tol. | |
D | f8 |
6 | −0.010 −0.028 |
8 | −0.013 −0.035 |
10 | |
12 | −0.016 −0.043 |
13 | |
15 | |
16 | |
18 | |
20 | −0.020 −0.053 |
25 | |
30 | |
35 | −0.025 −0.064 |
40 | |
50 |
Part Number | 1 mm Increments | P (Coarse) Selection | N (Coarse) Selection | (Y) Max. | R | C | |||||||||||||||||||||||
Type | D | L | F | B | |||||||||||||||||||||||||
D Tol. f8 SL-PSSFGD SH-PSSFGD | 6 | 25 to 898 | 2≦F≦P × 5 | (When P ≤ 6) B≦F−2 (When P = 8, 10) B≦F−3 (When P ≥ 12) B≦F−5 (W/o Threads) B = 0 [ ! ] B ≥ Pitch × 3 | 3 | 4 | 5 | 6 | 3 | 900 | 0.3 or Less | 0.5 or Less | |||||||||||||||||
8 | 25 to 1098 | 3 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 1100 | |||||||||||||||||||
10 | 25 to 1198 | 3 | 4 | 5 | 6 | 8 | 10 | 3 | 4 | 5 | 6 | 1200 | |||||||||||||||||
12 | 25 to 1398 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 1400 | ||||||||||||||||
13 | 25 to 1398 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 1400 | |||||||||||||||||
15 | 25 to 1398 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 1400 | ||||||||||||||||
16 | 25 to 1398 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 1400 | |||||||||||||||
18 | 25 to 1398 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 1400 | |||||||||||||||
20 | 25 to 1398 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 4 | 5 | 6 | 8 | 10 | 12 | 1400 | 1.0 or Less | |||||||||||||
25 | 25 to 1398 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1400 | |||||||||||||
30 | 25 to 1498 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 1500 | ||||||||||||||
35 | 25 to 1498 | 10 | 12 | 16 | 20 | 24 | 30 | 8 | 10 | 12 | 16 | 20 | 24 | 1500 | 0.5 or Less | ||||||||||||||
40 | 40 to 1498 | 12 | 16 | 20 | 24 | 30 | 10 | 12 | 16 | 20 | 24 | 30 | 1500 | ||||||||||||||||
50 | 50 to 1498 | 16 | 20 | 24 | 30 | 12 | 16 | 20 | 24 | 30 | 1500 |
·See below for alteration.
* When selecting multiple alterations, the distance between machined areas should be 2 mm or more.
Alteration Code | Alteration Details | Fixed Dimension | Applicable Conditions | Ordering Example | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LKC | ·L < 200 >> L ± 0.03 ·200≦L<500→L±0.05 ·L≧500→L±0.1 | L dimension can be specified in 0.1 mm increments. | SFAD30-250.5-F40-B30-P10-N10-LKC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
WSC |
| Applicable to D = 6 or more WSC, X = 1 mm Increments WSC+X+ℓ1 × 2<L WSC (X) ≧0 Cannot be machined coplanarly. | SFAD30-250-F40-B30-P10-N10-WSC12-X8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
FC |
| FC, E = 1 mm Increments D≦30:FC≦5 × D, D≧35:FC≦3 × D E = 0 or E ≥ 2 Not available in combination with WFC. | SFAD30-250-F40-B30-P10-N10-FC10-E8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
WFC |
| WFC, A, E = 1 mm Increments D≦30:WFC≦5 × D, D≧35:WFC≦3 × D A(E) = 0 or A(E) ≥2 Cannot be machined coplanarly. Not available in combination with FC. | SFAD30-250-F40-B30-P10-N10-WFC8-A8-E4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
RC |
| Applicable to D = 10 to 30 RC = 1 mm Increments RC + b1 ≤ L RC≧2 Not available in combination with WRC. | SFAD30-250-F40-B30-P10-N10-RC10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
WRC |
| Applicable to D = 10 to 30 WRC = 1 mm Increments WRC + b1 ≤ L WRC (Y) ≧2 Cannot be machined coplanarly. Not available in combination with RC. | SFAD30-250-F40-B30-P10-N10-WRC10-Y10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
PMC PMS | [Bearing Nut Fine Thread Alteration] ·Specify "PMC" [Cylinder Fine Thread Alteration] ·Specify "PMS" | SFAD30-250-F40-B30-PMC15-N10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NSC |
| Applies to D = 12 or more Not available in combination with ND. | SFAD30-250-F40-B30-P10-NSC14 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
ND | - | Applicable to D = 10 to 30 and N = 6 to 20 One End Tapped: ND × 3.5+7≦L Not available in combination with NSC. | SFAD30-250-F40-B30-P10-ND6 |
Working Environment: General environment
Alkaline warm pure water | Ultrasonic pure water cleaning after cleaning with pure water *3 times | Dry | Anti-rust single packing |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
Hydrocarbon cleaning Ro water cleaning | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
Hydrocarbon cleaning Ro water cleaning | Electrolytic polishing with an electrolytic polishing layer according to the material | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use warm pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment |
For degreasing: (Part Number: SL-□□) | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□) [ ! ]Both the first and second layer packaging are degassed. |
Cleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
---|---|---|---|---|---|
Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
Post battery assembly process | |||||
Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
LCD-related post assembly process | |||||
In-vehicle camera assembly process | |||||
Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
Liquid crystal deposition process | |||||
Pre-OLED process |
Part Number |
---|
SH-PSSFGD40-[40-800/1]-F[2-210/1]-B[0-205/1]-PMC[12,15,17,20,25,30]-N[10,12,16,20,24,30] |
SH-PSSFGD40-[40-800/1]-F[2-210/1]-B[0-205/1]-PMC[12,15,17,20,25,30]-NSC[10,12,14,18] |
SH-PSSFGD40-[40-800/1]-F[2-210/1]-B[0-205/1]-PMS[12,14,18]-N[10,12,16,20,24,30] |
SH-PSSFGD40-[40-800/1]-F[2-210/1]-B[0-205/1]-PMS[12,14,18]-NSC[10,12,14,18] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-P[16,20,24,30]-N[12,16,20,24,30] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-P[16,20,24,30]-NSC[12,14,18] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-PMC[15,17,20,25,30]-N[12,16,20,24,30] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-PMC[15,17,20,25,30]-NSC[12,14,18] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-PMS[14,18]-N[12,16,20,24,30] |
SH-PSSFGD50-[50-800/1]-F[2-210/1]-B[0-205/1]-PMS[14,18]-NSC[12,14,18] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Shaft Dia. D (Ø) | Length L (mm) | Cleaning Method | F (㎜) | Coarse Tapped [ND] Depth=Nx3 (㎜) | Coarse Tapped [N] Depth=Nx2 (㎜) | B (㎜) | Change to Fine Thread [PMS] (㎜) | Change Tapped Thread N to Fine Thread [NSC] (㎜) | Change to Fine Thread [PMC] (㎜) | P (㎜) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 40 | 40 ~ 800 | Precision Cleaning | 2 ~ 210 | - | 10 ~ 30 | 0 ~ 205 | - | - | 12 ~ 30 | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 40 | 40 ~ 800 | Precision Cleaning | 2 ~ 210 | - | - | 0 ~ 205 | - | 10 ~ 18 | 12 ~ 30 | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 40 | 40 ~ 800 | Precision Cleaning | 2 ~ 210 | - | 10 ~ 30 | 0 ~ 205 | 12 ~ 18 | - | - | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 40 | 40 ~ 800 | Precision Cleaning | 2 ~ 210 | - | - | 0 ~ 205 | 12 ~ 18 | 10 ~ 18 | - | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | 12 ~ 30 | 0 ~ 205 | - | - | - | 16 ~ 30 | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | - | 0 ~ 205 | - | 12 ~ 18 | - | 16 ~ 30 | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | 12 ~ 30 | 0 ~ 205 | - | - | 15 ~ 30 | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | - | 0 ~ 205 | - | 12 ~ 18 | 15 ~ 30 | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | 12 ~ 30 | 0 ~ 205 | 14 ~ 18 | - | - | - | ||
- | CLEAN_LINEAR SHAFT | 1 Piece(s) | 9 Day(s) | 50 | 50 ~ 800 | Precision Cleaning | 2 ~ 210 | - | - | 0 ~ 205 | 14 ~ 18 | 12 ~ 18 | - | - |
Loading...
Basic Shape | Solid | End Shape (Left) | Threaded | End Shape (Right) | Tapped |
---|---|---|---|---|---|
Shaft End Perpendicularity | Perpendicularity (0.2) | Material | S45C | Heat Treatment | Not Provided |
Surface Treatment | Hard Chrome Plating | Shaft Fit Tolerance | f8 | Hardness | Not induction hardened |
Material Certificate | Available | Material Certificate: Material | SUS304 |
How can we improve?
How can we improve?