(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Type | ![]() | ![]() | ![]() | D (mm) | L (mm) | |
Standard | ||||||
D Tolerance g7 | D Tolerance f8 | |||||
E-SFJT | - | 45 or GCr15 | High Frequency Quenched For effective hardening layer depth>>Refer to (PDF) 45 or GCr15 55HRC~ SUS440C or high hardness corrosion resistant steel 53HRC~ | - | 4~50 | 20~1500 |
E-SSFJT | - | SUS440C or High hardness corrosion resistant steel | ||||
E-PSFJT | - | 45 or GCr15 | Hard Chrome Plated Plating hardness: 750HV~ Plating thickness: 3μ or more | |||
E-PSSFJT | - | SUS440C or High hardness corrosion resistant steel | ||||
- | E-PSFGT | 45 | - | Hard Chrome Plated Plating hardness: 750HV~ Plating thickness: 10μ or more |
Part Number | ![]() | ![]() Selection | |||||||||||||
![]() | ![]() | Standard | |||||||||||||
Standard Type (D Tolerance g7) E-SFJT E-SSFJT E-PSFJT E-PSSFJT (D Tolerance f8) E-PSFGT | 4 | 20~300 | 2 | ||||||||||||
5 | 20~400 | 2.6 | 3 | ||||||||||||
6 | 20~800 | 3 | |||||||||||||
8 | 20~1000 | 3 | 4 | 5 | |||||||||||
10 | 20~1000 | 3 | 4 | 5 | 6 | ||||||||||
12 | 20~1200 | 4 | 5 | 6 | 8 | ||||||||||
13 | 25~1200 | 4 | 5 | 6 | 8 | ||||||||||
15 | 25~1200 | 4 | 5 | 6 | 8 | 10 | |||||||||
16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | |||||||||
20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | ||||||||
25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | |||||||
30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | ||||||||
35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | 20 | |||||||
40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | ||||||||
50 | 65~1500 | 10 | 12 | 16 | 20 | 24 | 30 |
D Tolerance | ||
D | g7 | f8 |
4 | -0.004 -0.016 | - |
5 | ||
6 | -0.004 -0.016 | -0.010 -0.028 |
8 | -0.005 -0.020 | -0.013 -0.035 |
10 | ||
12 | -0.006 -0.024 | -0.016 -0.043 |
13 | ||
15 | ||
16 | ||
20 | -0.007 -0.028 | -0.020 -0.053 |
25 | ||
30 | ||
35 | -0.009 -0.034 | -0.025 -0.064 |
40 | ||
50 |
Dimension (more than) | Dimension (to) | Shaft Tolerance g7 |
2 | 6 | ±0.1 |
6 | 30 | ±0.2 |
30 | 120 | ±0.3 |
120 | 400 | ±0.5 |
400 | 1000 | ±0.8 |
1000 | 1500 | ±1.2 |
![]() | ②Reduced hardness of machined parts Machining is performed after quenching of base metal. The parts that may be reduced in hardness due to annealing are: -All threaded -All stepped -Tapped: when M≥D/2, tapped double-hole type, hard chrome plated products made of SUS440C or high hardness corrosion resistant steel -Adds wrench flats (SC-WSC-SX) -Adds screw flats (FC-WFC) -Adds V-grooves (VC-WVC) -Except for full length hardened type. |
Only the shaded portion of D part is hard chrome plated.![]()
| ③Plating of surface treatment Machining is performed after surface treatment of base metal. No electroplating treatment is applied to the following parts: -Groove part -Threaded part -Tapped part -Wrench slot, V-groove, plane, cut section -The inside of the tube-type guide shaft may rust without hard chrome plating. |
Medical | Semiconductor | Electronic & Electrical | ||
![]() | ![]() | ![]() | ||
Smart Phones | Food | Automotive | ||
![]() | ![]() | ![]() |
Linear Bushing Standard Type Straight Type | Bearing with Housing T-Shaped | Shaft Collars (Clamp) | ||
![]() | ![]() | ![]() | ||
Representative model: LMU8 | Representative model: BGHK6000ZZ-30 | Representative model: SCS8-10 |
Basic Shape | Solid | End Shape (Left) | Tapped | End Shape (Right) | No Machining |
---|---|---|---|---|---|
Shaft End Perpendicularity | Perpendicularity (0.2) | Material | S45C | Heat Treatment | Induction Hardened |
Surface Treatment | Hard Chrome Plating | Shaft Dia. D(Ø) | 6 | Shaft Fit Tolerance | g7 |
Precision | Standard |
How can we improve?
How can we improve?