ABS Plates
Brand :
MISUMI
Caution
Product Description
ABS has excellent machinability and paintability, and is widely used as a material that can be plated on plastic bodies.
Drawing
| ■ Standard Type | ■ Hole Machined Type | |
 | 2H 4H 6H  | |
| [ ! ]A ≥ B | [!] Hole diameter / hole pitch dimension (F/G/XC/YC) tolerances are JIS B 0405 intermediate. | |
| * The hole position in dimensional outline drawing is not applicable because it is affected by the external dimensional tolerance. (Number of Holes: 2H, when selecting Alteration XC/YC) |
| Nominal Dia. | b (Minimum Value) |
| 3 to 10 | 2.5 |
| Hole Machining Details | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| N (Through Hole) | Z (Counterbored Hole) | N (Through Hole) / Z (Counterbored Hole) Details | M (Threaded Insert) | ■Table 1 M (Thread Insert) Details | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |  |
|  Ordering Code (Example) M4-L6 [ ! ]L ≤ T－1 [ ! ] When L + 5 < T, drilled holes will be blind ones. |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Finish | 4 Sides | Upper-Lower Surface | ||
| Machining Method | Surface texture | Machining Method | Surface texture | |
| Circular sawing | Circular sawing |  | Material |  |
| Guaranteed Perpendicularity of Circular Saw Cuts (NT) | Circular sawing |  | Material |  |
| 4-side Milling, etc. * (4F) | Milling, etc.* |  | Material | |
| 6-surface Milling, etc. * (6F) | Milling, etc.* | | Milling, etc.* | |
| Upper-lower Surface Milling, etc. * (2F) | Circular sawing | | Milling, etc.* | |
| [M]Material: ABS Plates: Acrylic Nitrile, Butadiene, Styrene | ||||
| Type | [M] Material | Color | Operating Ambient Temperature |
| NABS | ABS | Natural Color | Ambient Temperature Up to 50°C |
| NBBS-G | Black |