Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall

■Standard

[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
			p6	m6
SKS3 Equivalent	-	56~60HRC	JBHFP	JBHF
SKS3 Equivalentivalent	Black Oxide	56~60HRC	JBHFBP	JBHFB
SKS3 Equivalent	Electroless Nickel Plating	56~60HRC	JBHFMP	JBHFM
SUS304	-	-	JBHFSP	JBHFS
SUS440C or 13Cr stainless	-	50~55HRC	JBHFCP	JBHFC

[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)

■Thin Wall

[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
			p6	m6
SKS3 Equivalent	-	56~60HRC	JBHUFP	JBHUF
SKS3 Equivalent	Black Oxide	56~60HRC	JBHUFBP	JBHUFB
SKS3 Equivalent	Electroless Nickel Plating	56~60HRC	JBHUFMP	JBHUFM
SUS440C or 13Cr stainless	-	50~55HRC	JBHUFCP	JBHUFC

[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)