Locating Pins - Straight, Sphere (Press Fit)
Brand :
MISUMI
Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
- Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.
●Press Fit
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]When the D dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]When the D dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]Polishing and centering hole may not be provided.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
| Press Fit | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | LPSQA |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GLPSQA |
| (3) | SKS3 Equivalent | - | - | BLPSQA |
| (4) | SUS304 | - | - | SLPSQA |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HLPSQA |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CLPSQA |