Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)
Brand :
MISUMI
Caution
Product Description
- Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
- Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
[ ! ]Polishing and centering hole is sometimes not available for SUS304.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
| Material No. | [ M ]Material | [ S ] Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFQSTA | KFQSTD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFQSTA | GKFQSTD |
| (3) | SUS304 | - | - | SKFQSTA | SKFQSTD |