Cam Follower / Solid Eccentric Cam Follower - Flat
Brand :
MISUMI
Caution
- [Specification Change] The materials, appearances, and packaging specifications of some products will be changed sequentially starting in December 2025. Please see here for details and applicable part numbers. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
Since the stud head and shaft are eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud. For order of 51 or more pieces, the price is reduced by 20%.
[ ! ]For d10 and smaller sizes, no grease replenishing hole is provided.
[ ! ]Operating Temp.: 80°C or lower
[ ! ]Operating Temp.: 80°C or lower
| Shape | Type | [ M ]Material | [ A ]Accessories | |||
| Hex Socket on Head (d6 ~ 10) | Hex Socket on Head and Thread (d12 ~ 16) | |||||
| No Seal | With Seal | No Seal | With Seal | |||
| Flat | CFAP | CFFAP | CFAPH | CFFAPH | SUJ2*1 | Hex Nut 1 pc. (S45C*2, Black Oxide) |
More Information
[ ! ]As the stud (dh7) is eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud when mounting.
Part Number Substitution Table for Cam Follower Standard Changes (d12, 16)
| Seal | Material | Old Part Number (Hex Socket on Head) | New Part Number (Hex Socket on Head and Thread) |
| With Seal | SUJ2 | CFFAP | CFFAPH |
| No Seal | CFAP | CFAPH |