Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded

Brand :
MISUMI

Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Features]
· Polishing Relief Groove is smaller than the conventional products to avoid a workpiece getting stuck
[ ! ] For Diamond Shapes, a step will be produced at the base of the P dimension.

Locating Pins for Fixtures, Standard Grade, Shouldered, Threaded

Standard-grade shouldered locating pins with a threaded mounting form, in round and diamond shapes. The smaller polishing relief groove helps avoid a workpiece becoming stuck.

For Standard Grade, the P dimension tolerance is 0 -0.05 and concentricity is 0.03 or 0.05. A machining step remains at the base of the P dimension when a diamond shape is selected.

Material, surface treatment and hardness

With the diamond shape, a machining step remains at the base of P.

e = P/2 ÷ tan15° + R - (R ÷ sin15°). Reference: sin15° ≈ 0.259, tan15° ≈ 0.267

Unspecified tolerances conform to JIS B 0405 class m, except male thread length and angle tolerances.

Relief dimensions are reference values.

Coaxiality of DLC-coated and TiCN-treated items is the value in ( ), and their thread shape differs from the standard items.

DLC-coated and TiCN-treated items have no center hole.

Reference tightening torques are for strength class 8.8 for DLC-coated and TiCN-treated items, and class 10.9 for others.

This does not apply when a thread locker or spring washer is used.

TypeMaterialHardnessSurface treatment
ELANARoundSCM435Hardened
35–40HRC
‐
ELANDDiamond
TELANARoundSCM415Carburized and hardened
55HRC–
(depth 0.7–0.8)
TELANDDiamond
R-LANARoundSCM43535–40HRC
(surface 750HV or more)
Hard chrome plating
R-LANDDiamond
D-LANARoundSKD11 equivalent55HRC–
(surface 3000HV)
DLC coating
D-LANDDiamond
H-LANARound55HRC–
(surface 3000HV)
TiCN treatment
H-LANDDiamond

Tightening torque

Nominal thread size8.8
Yield loadInitial clamping forceTightening torque
N{kgf}N{kgf}N·cm {kgf·cm}
M612867
{1313}
9006
{919}
784{80}
M823422
{2390}
16395
{1673}
1911{195}
M1037113
{3787}
25980
{2651}
3783{386}
M1253949
{5505}
37759
{3853}
6605{674}
M16100470
{10252}
70325
{7176}
16366{1670}
Nominal thread size10.9
Yield loadInitial clamping forceTightening torque
N{kgf}N{kgf}N·cm {kgf·cm}
M618894
{1928}
13220
{1349}
1156{118}
M834398
{3510}
24079
{2457}
2803{286}
M1054508
{5562}
38161
{3894}
5557{567}
M1279223
{8084}
55458
{5659}
9702{990}
M16147549
{15056}
103282
{10539}
24108{2460}

Tightening conditions: torque wrench (surface oil lubrication, torque coefficient k = 0.17, tightening factor Q = 1.4)

The torque coefficient varies with operating conditions. Use it as a rough guide.

Part numbers and dimensions

Ordering example

Type-P-B-L
TypeD
ELANA8-P6.0-B15-L10
TypeP
Specified
0.1 mm increments
B
Specified
1 mm increments
L
Selection
ℓ1HRW
TypeDh7
Hardened
Carburized
Hard chrome
DLC coating
TiCN
<Round>
ELANA
TELANA
R-LANA
D-LANA
H-LANA
<Diamond>
ELAND
TELAND
R-LAND
D-LAND
H-LAND
60
-0.012
3.0–8.02–30
(B≤P×4)
58106911–2
80
-0.015
3.0–10.05810121510111.51–2
104.5–12.0(5)(8)101215121321–3
10T4.5–12.0(5)(8)101215181321–3
120
-0.018
9.0–14.0(8)10121518151534
1613.0–18.0(10)12151820181945

W dimension: D6, D8: W = 2 when P > 5.0. D10, 10T: W = 1 when P < 5.0, W = 2 when 5.0 ≤ P ≤ 7.0, W = 3 when P > 7.0. L sizes in ( ) are not available with the diamond shape, DLC coating or TiCN treatment.

DLC-coated and TiCN-treated items require B of 5 mm or more.

Alterations

Alterations are available. Refer to the alteration table for applicable codes, dimensional limits and conditions.

For details, please see the PDF catalog.

Viewed Products
Recently Viewed Products
My Components
My Components
0
Cart
Cart
Economy Series
MRO Product

Chat with MISUMI

Chat service is available for any inquiry to MISUMI

Service hours

9:00 - 18:00 (Mon-Sat)

For out of service hours, you can leave a message to us.
We will reply to your inquiries on the next business day.
(except Sundays and public holidays).

Noted for use

Chat service is for Corporate customers and limited for Thai language.

Request for Quotation and Place Order is not available on Chat.

Start chat

Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded | MISUMI | MISUMI Thailand