Tensioner Units with Idler-Height Configurable
Brand :
MISUMI
Caution
Product Description
Tension can be adjusted in the following two directions: “Push” and “Pull.” The mount heights of idler can be selected.
Dimensional Drawing
Handle part (adjustment screw head) details View A
■Dimensional tolerances
without command
(Idlers, bearings, bolts,
and nuts are not included)
[ ! ]Compliant with JIS B
0405 Class m (intermediate).
without command
(Idlers, bearings, bolts,
and nuts are not included)
Over | or Less | Tolerance |
0.5 | 3 | ±0.1 |
3 | 6 | ±0.1 |
6 | 30 | ±0.2 |
30 | 120 | ±0.3 |
120 | 400 | ±0.5 |
0405 Class m (intermediate).
[ ! ]The idler can be moved by loosening the nut on the end. Tighten to secure.
| Type | Material | Surface Treatment | |||||||||||
| Base Plate | Idler Shaft | Adjustment Screw | Nut | Washer | Idlers Sprocket | Bearing | Base Plate | Idler Shaft | Adjustment Screw | Nut | Washer | Idlers Sprocket | |
| TSUB | SS400 | S45C | SWCH Equivalent | SPCC Equivalent | S35C Equivalent (Induction Hardened Teeth Tip) | Steel | Black oxide | ||||||
| TSUBS | SUS304 | SUS304 equivalent | Stainless Steel | - | |||||||||
App. Example
 | ■Tension Adjustment Method (1) Loosen the nut (2) Adjust the tension using the adjustment screw (3) Loosen the nut |
| ■Tension Adjustment Method (1) Loosen the nut (2) Adjust the tension using the adjustment screw (3) Loosen the nut ■Adjustment Method of Stainless Steel Type ·Both the idler shaft and adjustment screw are made of stainless steel, so when adjusting scuffing may occur. ·You are advise to apply grease to the adjustment screw before making adjustments. |