Economy Acrylic Plate -Curved / Extruded Type

Brand :

MISUMI

Caution

Product Description

[Features]·It is cheaper than cast plates · Extruded plate type acrylic plates.

Drawing

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Acrylic Plates - Extruded: Related Image

1 to 16 × Bolt Nominal Dia. Selection

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C) / (a - 1),
bp = (B - 2D)/(b - 1).
[!] When the number of holes per side is 1, the (C) and (D) dimensions are not applied to the holes from the end face. (Asymmetrical machining)
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

Hole Machining Conditions (N・P)

Screw Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

Nominal Dia.	b (Min. Value)
3 to 8	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
Acrylic Plates - Extruded: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

"Keyhole Position"
(1): The hole position for the specified dimensions D and bp is at the center of d₁ .
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
(3): The center of diameter d₁ for the keyhole is consistent with the value for the center of C(D).

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex. If the number of holes on the A-side is 3 and the number of holes on the B-side is 3, then ACAE33W8.
[!] The formula for calculating the total number of holes is 2a + 2b - 4. When a and b are 1, then a × b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

Type	[ M ] Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	－30 to 70°C
ACBAE	Standard	Smoke Brown	34%	－30 to 70°C
ACTAE	Antistatic	Transparent	87%	－30 to 60°C
ACBTAE	Antistatic	Smoke Brown	25%	－30 to 60°C

● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0
[ ! ] For A and B dimensions, please specify A≧B.

■Number of Holes Combination Type (No Corner Drilling)

4 to 16 × Bolt Nominal Dia. Selection

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/ (a - 1),
bp = (B - 2S)/(b - 1).
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

Hole Machining Conditions (N・P)

Screw Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

Nominal Dia.	b (Min. Value)
3 to 8	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
Acrylic Plates - Extruded: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

"Keyhole Position"
(1): The hole position for the specified dimensions D and bp is at the center of d₁ .
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
(3): The center of the diameter d₁ for the keyhole is consistent with the value for the center of D(R).

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex.) If the number of holes on the A-side is 2 and the number of holes on the B-side is 2, then ACAE22V8.
[ ! ] The formula for calculating the total number of holes is 2a + 2b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

Type	[ M ] Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	－30 to 70°C
ACBAE	Standard	Smoke Brown	34%	－30 to 70°C
ACTAE	Antistatic	Transparent	87%	－30 to 60°C
ACBTAE	Antistatic	Smoke Brown	25%	－30 to 60°C

● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0
[ ! ] For A and B dimensions, please specify A≧B.

■ Hole Machined Type

2H4H6H8H

[ ! ]A ≥ B

* Keyhole Reference Position

"Keyhole Position"
(1): For 2H, the center of diameter d1 is consistent with G.
(2): For 4H and 6H, the center of G dimension is consistent with the center of B dimension.
(3): For 8H, the center of diameter d1 of the middle keyhole is consistent with the center of B dimension.

Keyhole Details

Hole Machining Details

Q (Keyhole)
Acrylic Plates - Extruded: Related Image

N
(Through Hole)

P
(Countersink)

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

[ ! ] Please use flat washers to prevent resin damage.
　

Bolt Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

[ ! ] Keyhole Machining Conditions
　　　a ≥ 5
　　　b ≥ 5

Type	[M]Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	−30 to 70°C
ACBAE	Standard	Brown Smoke	34%	−30 to 70°C
ACTAE	Antistatic	Transparent	87%	−30 to 60°C
ACBTAE	Antistatic	Brown Smoke	25%	−30 to 60°C

■ Accuracy Standards
● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0

■ Standard Type

[ ! ]A ≥ B

Type	[M]Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	−30 to 70°C
ACBAE	Standard	Brown Smoke	34%	−30 to 70°C
ACTAE	Antistatic	Transparent	87%	−30 to 60°C
ACBTAE	Antistatic	Brown Smoke	25%	−30 to 60°C

■ Accuracy Standards
● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0

Economy Acrylic Plate -Curved / Extruded Type

Caution

Product Description

Drawing

Chat with MISUMI

Service hours

Noted for use