Low Pressure Type/Non-welded
Brand :
MISUMI
Caution
Product Description
[Features]
• Non-welded fitting joints provide corrosion resistance.
• Flexible hose construction is suitable for vibration absorption.
• Gasketless design.
[Use]
• For general-purpose plumbing, including control of pipe displacement.
Installation Method
| Incorrect | Correct | ||||
|---|---|---|---|---|---|
| Using the tube with excessive bending will significantly shorten its service life. |  | Incorrect | Use pipes for tight radius sections and keep the hoses within allowed bend radius ranges. |  | Correct |
| Repeatedly flexed sections require extra cautions. |  | Incorrect | Use the curved pipes, and mount tubes in order to form U-shapes. |  | Correct |
| Hose twisting loads due to repeated horizontal motion are very dangerous. |  | Incorrect | Avoid excessive curvatures by attaching rollers that turn with movements of the hose. |  | Correct |
| The hose will be twisted if rotary motions are applied to the mounting points. |  | Incorrect | Avoid the hose twists by mounting rotary fittings. |  | Correct |
| The hose will twist if not mounted in-line with the direction of motion. |  | Incorrect | Be sure to mount the hose in-line with the direction of motion. |  | Correct |
Application Example
Easy to install even if the piping is misaligned
For vibration absorption from equipment that generates vibrations
Can be bent and used to save labor in construction work
For piping of moving equipment
Product Comparison Information
| Product Name | (This Product) Low Pressure (Non-Welded) Type | High Pressure Type | Medium Pressure Type | Low Pressure (Non-Welded) Type, PT / PT Female | Flexible Fluororesin Hoses | Flexible Tubes | Flexible Fluororesin Hoses - High-Flex Type |
|---|---|---|---|---|---|---|---|
| Product Image |  |  |  |  |  |  |  |
| Hose Material | Stainless Steel (SUS304) | Stainless Steel (SUS304) | Stainless Steel (SUS304) | Stainless Steel (SUS304) | Fluororesin | Stainless Steel (SUS304) | Fluororesin |
| Applicable Fluid | Steam, Water, Oil, Air | Steam, Water, Oil, Air | Steam, Water, Oil, Air | Steam, Water, Water, Oil, Air | Water, Air, Solvent | Water | Water, Air, Solvent |
| Inner Diameter d (⌀) | 10.5-25.2 | 7-25.5 | 7.2-52.6 | 17-56.4 | 4.8-7.9 | 12-15 | 4-11 |
| Maximum Operating Pressure (MPa) | 1 | 3.4-6.4 | 2 | 1 | 17-20.5 | 1.75 | 2-3 |
| Braid | Provided | Provided | Provided | Provided | Provided | N/A | Provided |
| Minimum Bending Radius (mm) | 35-80 | 25-45 | 25-140 | 60-140 | 51-102 | 40-60 | 20-30 |
| Connection Section Material | Stainless Steel / Steel | Stainless Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Stainless Steel |
Related Components
 |  |  |  |  |  |
- [ ! ]To prevent fluid leakage, please use sealing tape for PT and an O-Ring for PF thread.
Cautions/Prohibitions
- No surface treatment is applied on flange circumference.
- The hex parts at both ends of the hose do not rotate.
Related Link
