Worm Gear/Module 0.8/1.0
Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
[Features] Misumi's worm gears start from 520 yen each! [Accuracy] Equivalent to JIS B 1702 grade 4 (tooth surface finish: rolled)
[Material] S45C (steel, iron)
[Surface treatment] Triiron tetroxide film (black dyed)
[Teeth Surface hardness] 12HRC or less
[Compatible modules] Module 0.8, module 1.0
[A stalk compatible]
[Other names] Also called worm.
[ M ] Material: S45C Equivalent [ S ] Surface Treatment: Black Oxide
[ H ] Tooth Surface Hardness: 12HRC or less [ A ] Accessory: Set Screw M4
Accuracy Class JIS B 1702 Class 4 or Equivalent (Tooth Surface Finish: Rolled)
Specifications/Overview
■Datum Section of Gears, Normal to Tooth / Datum Plane for Gear Cutting: Bore
■Precautions for Use
·As high thrust load is applied to worm, be sure to fix it tightly when attaching to shaft.
·Avoid using with the worm gear pushed against the wheel or axially offset condition.
[ ! ] As worm wheels are modified according to F (engagement center distance), spiral bevel gears from different manufacturers may not mesh correctly.
■Precautions for Use
·As high thrust load is applied to worm, be sure to fix it tightly when attaching to shaft.
·Avoid using with the worm gear pushed against the wheel or axially offset condition.
[ ! ] As worm wheels are modified according to F (engagement center distance), spiral bevel gears from different manufacturers may not mesh correctly.