Locating Pins - Large Head, Tapered - Threaded, Hex Socket
Brand :
MISUMI
Caution
- Threaded type: To add relief at the thread end, specify the "NNC" alteration.
Product Description
- Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
- Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
| Materials No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | Shape Code |
| (1) | SKS3 Equivalent | - | Treated Hardness 60 ~ 63HRC | FPNS | A(Round) D(Diamond) |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness 60 ~ 63HRC Plating Hardness 750HV ~ | GFPNS | |
| (3) | SKS3 Equivalent | - | - | BFPNS | |
| (4) | SUS304 Equivalent | - | - | SFPNS | |
| (5) | SUS304 Equivalent | Hard Chrome Plating | Plating Hardness 750HV ~ | HFPNS | |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness 50 ~ 55HRC | CFPNS |
■Tapped and Threaded Recommended Tightening Torque (Reference)
The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on P.2297.) Not applicable when using locking materials or lock washers.
| M (Coarse) | Tightening Torque |
| N • cm | |
| M3 | 98 |
| M4 | 225 |
| M5 | 461 |
| M6 | 784 |
| M8 | 1911 |
| M10 | 3783 |
| M12 | 6605 |
| M16 | 16366 |
| M20 | 32928 |