Timing Belts with Attachments-T5/T10
Caution
Product Description
- Timing Belts with Attachments-T5/T10, ATBT series from MISUMI.
- Attachments are thermally bonded to the backside of the Timing Belt enabling constant pitch conveyance of various work pieces.
- The allowable operating temperature range is -20 ~ 70°C. (Reference Value)
- Attachment is mounted on the backside above the belt teeth.
- The jointing process reduces allowable tension to approx. 50% of Open-End Belts.
- If the attachments are to receive vibrations or large loads, test the applicability before using.
Extension Description 1 Belt Circumference Length
The specified dimension of the timing belt circumference length has been changed to the unit of the number of teeth.
| Before |  | After |
|---|---|---|
| Specification Unit: 50 mm increments | Specification Unit: T5 type 5 mm increments T10 type 10 mm increments | |
| 67 types | 661 types | |
 |  |
Extension Description 2. Attachment Mounting Pitch
The minimum pitch of attachment mounting pitch and the specification unit have been changed.
It is possible to make more suitable design for the workpiece dimension and improve transfer efficiency.
| Before | | After |
|---|---|---|
| Minimum pitch: 50 mm | Minimum pitch: Attachment AB 30 mm Attachment C 40 mm | |
| Specification Unit: 50 mm increments | Specification Unit: T5 type 5 mm increments T10 type 10 mm increments | |
| (Example): P: 100 mm is poor in transfer efficiency : P: 50 mm is small | P: 80 mm improves transfer efficiency. | |
 |  |
＼Able to configure in fine dimensions, increasing transfer efficiency/
Application Example
Simultaneous Conveyance
Conveying workpieces at regular intervals using attachments.
Vertical Conveyance
Conveying light workpieces using attachments.
