Sprockets-50B Series
Brand :
MISUMI
Caution
Product Description
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.
[Feature]
● Number of Teeth Minimum/Maximum : 9 and 35
● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap
● Shaft Bore Diameter Minimum/Maximum (mm.) : 15 and 25
● Material :
SP50B and BSP50B are S45C Equivalent (Spurs are Induction Hardened)
SSP50B - SUS304 Equivalent
● Surface treatment : Black Oxide only BSP50B
[Application]
Sprockets are commonly used in industrial machinery, such as chain conveyors.
SP50B
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
BSP50B
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
[ A ] Accessory: Set Screw
(Only for shaft bore specifications)
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
BSP50B
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
SSP50B
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
[ ! ] Offset between tooth tip and keyway is ±0.5mm.
| Type | [ M ] Material | [ S ] Surface Treatment |
| SP50B | S45C Equivalent (Spurs are Induction Hardened) | - |
| BSP50B | S45C Equivalent (Spurs are Induction Hardened) | Black Oxide |
| SSP50B | SUS304 Equivalent | - |
(Only for shaft bore specifications)