Rack Gears-L Fixed/Economy Type/Both Ends Machined Type

Brand :
MISUMI
Caution
Product Description
[Features]L dimension fixed type can be used by connecting rack gears on both ends.
You can freely choose from no hole processing, side through hole processing, back tapped hole processing, side tapped hole processing, and side counterbored hole processing.
Dimensional Drawing
| ■Both Ends Machined Type Hole machining N: No Hole Machining |
|
Enlarged View of End Face (Both Ends Machined Type) ![]()
| Hole machining KA: Side Through Hole | Hole machining ST: Side Tapped | ||||||
Hole machining A: Back Tapped | Hole machining Z: Side Counterbored |
[ ! ] F = L - B x (K - 1) 2
Metal: L dimension tolerance (mm)
| Plastic: L dimension tolerance (mm)
| W, H Dimension Tolerance (mm)
| Accumulated Pitch Error (μm)
[ ! ] Values in ( ) are for RGEAS, RGEAM, RGEAP | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[ ! ] Dimensions may change depending on temperature and humidity.
| Type | Material | Surface Treatment |
| RGEA | S45C | Black Oxide |
| RGEAB | Free-cutting brass | - |
| RGEAS | SUS304 | - |
| RGEAM | MC Nylon (Blue) | - |
| RGEAP | Polyacetal (White) | - |
[ ! ] The end face may not have been surface treated.
[ ! ] Flatness (warpage) accuracy: L = 500 or less: 0.2, 501 or more: 0.3.
[ ! ] Material: MC nylon/Polyacetal may deviate from the specified dimension and Flatness accuracy due to transportation, storage, or operating environment.
[ ! ] This product is not hardened. For induction hardened products, click here>>
Specifications/Overview
How to Connect Rack Gears (Both Ends Machined Type)
MISUMI Rack Gears (Both Ends Machined Type) are end machined with negative pitch tolerance in length.
When connecting the racks, use a piece of rack (rack gear in the same module) as a spacer jig as shown in the right side figure to properly adjust the pitch.

Rack Gear Flatness Measurement Method
Measure the gap with the rack gear teeth facing up and both ends grounded.
Flatness Tolerance
0.2 for L = 500 or less
0.3 for L = 501 or more

MISUMI Rack Gears (Both Ends Machined Type) are end machined with negative pitch tolerance in length.
When connecting the racks, use a piece of rack (rack gear in the same module) as a spacer jig as shown in the right side figure to properly adjust the pitch.

Rack Gear Flatness Measurement MethodMeasure the gap with the rack gear teeth facing up and both ends grounded.
Flatness Tolerance
0.2 for L = 500 or less
0.3 for L = 501 or more


