Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed
Brand :
MISUMI
Caution
- The price list on this page is as of April 2023. For the latest price, please click the "Confirm Price" button after confirming the part number.
- Be careful to bend referring to rough standard of minimum bending radius; outer diameter × 3 so as not to apply a load to the soldered part.
- Since the soldered part is prone to detach, when bending the nozzle, secure the nozzle tip and push the mounting side to bend it.
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).
*Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.
Since the soldered part is prone to detach, when bending the nozzle, secure the nozzle tip and push the mounting side to bend it.
◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
From August 2021, we will be adding nominal size standards.
● Threaded Type (When Nominal = 3, 5 or 6)
(When Nominal = 0.5, 1 or 2)
● Terminal Block Type
● Tapped Type (When Nominal = 3, 5 or 6)
(When Nominal = 1 or 2)
● Crisscross Knurled Type (When Nominal = 5)
(When Nominal = 1)
* Nominal 1: ø8, Nominal 2: ⌀10
| Male Threaded | Tapped | Terminal Block | Knurling Crisscross | [M] Material | [H] Hardness | |||
| Annealing | No Annealing | Annealing | No Annealing | Annealing | ||||
| L Fixed | ABNZ | ABNZN | ABNZM | ABNZMN | ABTA | ABNK | Main Body, Pipe SUS304 | Annealing HV200 or Less No Annealing HV250 to 380 |
| L Configurable | ABNZL | ABNZNL | ABNZML | ABNZMNL | ABTAL | ABNX | ||
Specifications / Overview
[ ! ] The annealed pipe of d = 1.0 to 3.0 can be manually bent (not applicable when d = 4.0 or more).
Be careful to bend referring to rough standard of minimum bending radius; O.D. x 3.
Annealed pipe is available for Straight Type.
[ ! ] An industrial cutter can cut the pipe, rolling it.
[ ! ] Main body may be discolored due to heat by brazing.
Be careful to bend referring to rough standard of minimum bending radius; O.D. x 3.
Annealed pipe is available for Straight Type.
[ ! ] An industrial cutter can cut the pipe, rolling it.
[ ! ] Main body may be discolored due to heat by brazing.