Housing Units with Clamp Lever - Wide Blocks - Single/Double, Right/Left Clamp Lever
Brand :
MISUMI
Caution
- Except for MX Lubrication Units, MISUMI Linear Bushings are applied with anti-rust oil harmless to lubricants. After cleaning and drying the bushings, grease application is recommended before use.
- Recommended Cleaning Method: Ultrasonic cleaning machine or white kerosene
Product Description
MISUMI original. The Clamp Lever Type can position workpieces easier compared to the Standard Type.
Single, Right Lever
Single
Double
Single, Left Lever
Single
Double
* The linear shaft is clamped by the internal nut as the lever is rotated.
| Type | Used Linear Bushing | Housing | Collar/Thread | Used Clamp Lever | Lever | Lever Thread | Nut | Operating Ambient Temperature | |||||
| Single, Right Lever | Single, Left Lever | [M] Material | [S] Surface Treatment | [M] Material | [M] Material | [S] Surface Treatment | [M] Material | [M] Material | |||||
| Single | Double | Single | Double | ||||||||||
| LHBBC | LHBBWC | LHBLC | LHBLWC | LMU | Aluminum Alloy | Clear Anodize Treatment | SUS304 Equivalent | CLFSC | Zinc Diecast | Baked Paint Finish | SUS303 Equivalent | Stainless Steel (SUS) | −20 to 80°C |
App. Example
With Clamp Lever
Linear Bushing
Single, Left Lever
Linear Bushing
Single, Left Lever
With Clamp Lever
Linear Bushing
Single, Right Lever
■ Precautions for UseLinear Bushing
Single, Right Lever
·For installation, loosen the lever until the nut does not interfere with the shaft, then insert the shaft.
·Do not tighten the clamp without a shaft inserted. The linear bushing may be deformed and become unusable.
·Use as a temporary fixing device. Do not use as a permanent safety position holding device.
Compression
■Max. Thrust Load Test MethodThe collar in the housing unit is tightened to the torque value(s) shown in the chart, then compressive load is applied with the tester.
The compressive load with which the shaft begins to move is defined as the Max. Thrust Load. * Max. thrust load of greased linear bushings was measured.
