(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Gas release straight ejector pin made of die steel SKD61 + nitriding treatment, head thickness 10 mm, face cut, shaft diameter/length specified type.
Part Number |
---|
GW-DEPB4-[40-500/0.01]-P[3-3.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB5-[40-500/0.01]-P[4-4.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB6-[40-500/0.01]-P[5-5.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB7-[40-500/0.01]-P[6-6.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB8-[40-500/0.01]-P[7-7.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB10-[40-500/0.01]-P[8-9.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB12-[40-500/0.01]-P[10-11.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB15-[40-500/0.01]-P[12-14.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPB20-[40-500/0.01]-P[15-19.99/0.01]-E[0.02-0.05/0.01] |
GW-DEPL4-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL4-[500.1-600/0.1]-E[0.02-0.05/0.01] |
GW-DEPL5-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL5-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL6-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL6-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL7-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL7-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL8-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL8-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL10-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL10-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL12-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL12-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL15-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL15-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GW-DEPL20-[40-500/0.01]-E[0.02-0.05/0.01] |
GW-DEPL20-[500.1-700/0.1]-E[0.02-0.05/0.01] |
GWS-DEPB4-[40-500/0.01]-P[3-3.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB5-[40-500/0.01]-P[4-4.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB6-[40-500/0.01]-P[5-5.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB7-[40-500/0.01]-P[6-6.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB8-[40-500/0.01]-P[7-7.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB10-[40-500/0.01]-P[8-9.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB12-[40-500/0.01]-P[10-11.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB15-[40-500/0.01]-P[12-14.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPB20-[40-500/0.01]-P[15-19.99/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL4-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL4-[500.1-600/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL5-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL5-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL6-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL6-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL7-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL7-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL8-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL8-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL10-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL10-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL12-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL12-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL15-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL15-[500.1-700/0.1]-E[0.03-0.05/0.01] |
GWS-DEPL20-[40-500/0.01]-E[0.03-0.05/0.01] |
GWS-DEPL20-[500.1-700/0.1]-E[0.03-0.05/0.01] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | D/P (Shaft diameter) (mm) | Gas release shape | No. (Nominal diameter) (mm) | Type |
---|---|---|---|---|---|---|---|---|---|
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 4 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 5 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 6 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 7 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 8 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 10 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 12 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 15 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Single flat cutting | 20 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 4 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 4 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 5 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 5 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 6 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 6 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 7 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 7 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 8 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 8 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 10 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 10 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 12 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 12 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 15 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 15 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 20 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 20 | Single flat cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 4 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 5 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 6 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 7 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 8 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 10 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 12 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 15 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | - | Four flats cutting | 20 | Shaft Diameter·L Dimension Designation Type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 4 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 4 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 5 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 5 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 6 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 6 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 7 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 7 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 8 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 8 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 10 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 10 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 12 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 12 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 15 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 15 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 20 | Four flats cutting | - | Configurable full length type | ||
- | EJECTOR PIN | 1 Piece(s) | 7 Day(s) | 20 | Four flats cutting | - | Configurable full length type |
Loading...
Material | SKD61 | Surface treatment | Nitrided | Shaft diameter tolerance (Reference tolerance) | -0.01/-0.02 |
---|---|---|---|---|---|
L dimension tolerance (Reference tolerance) | +0.02/0 or +0.05/0 or +0.5/0 | Shape type | Gas release | Tip shape | No |
Character engraving type | No | Number of engraving characters | No |
How can we improve?
How can we improve?