Clamp for Molds (Easy Clamp) Made by MATEX(Comes with Hex Bolt)
Brand :
MISUMI
Caution
- Attach the bolts, washers and clamping washers at positions near the center of the mold and block. Mounting in the wrong position will decrease the mold fixing force, which may cause deformation and damage.
- Follow the molding machine instruction manual for the bolt tightening torque.
Product Description
[Applications]
It is used for clamping molds with Injection molding machine. (Made by MATEX)
→Here to watch this product video
[Features]
・「Comes with Hex bolts」・「Free delivery」
· Since it can be installed at four levels with one applicable bolt, there is no need to prepare several types of bolts. Also, the body can be removed and attached simply by turning the bolt by 0.5～1 rotation.
· By inverting the body and block, it handles the thickness of commercially available mold bases.
· The body and block are connected by a link (and are always in close contact thanks to the spring) and can be used to attach/detach the mold without the risk of loss.
Specification Table
| Part Number | Bolt Size (8 included) | Dimensions | Block height height (mm) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Type | NO. | A | B | C | D | E | F | G | ||
| MEC | SS | M10×70 | 80 | 28.5 | 10.5 | 20 | 25 | 15 | 6 | 10×15 |
| S | M12×80 | 30.5 | 12.5 | 22 | 20×25 | |||||
| M | M16×90 | 100 | 46.5 | 16.5 | 30 | 10.5 | ||||
| MA | 120 | |||||||||
| MB | 150 | |||||||||
| L | M20×120 | 61 | 21 | 39 | 30 | 13 | 30×35 | |||
| LA | M20×130 | 40×45 | ||||||||
Specifications and Summary
■Product introduction video（English）
Bolts included. Free delivery
.
①Main body ②Clamping washer ③Washer ④Hex bolts