Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/ (Heat-Resistant 99degree Series) /Sets-

[Features]
- The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
・When the plug is removed, no socket protrusions remain in the mold.
・Heating medium, water (clean water), and air can be used as fluids.
- The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
(The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)

[Notes]
・Please use at a water temperature of 99°C or below.
・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).