(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Face cut gas vent straight core pin with fixed shaft diameter (D) and specified shaft diameter (P).
Part Number |
---|
GW-CPV-L0.5-[15-60/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L0.6-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L0.7-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L0.8-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L0.9-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L1-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L1.2-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L1.5-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L2-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L2.5-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L3-[15-100/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L3.5-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L4-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L4.5-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L5-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L6-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L7-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L8-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L10-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPV-L13-[15-120/0.01]-E[0.02-0.05/0.01] |
GW-CPVB-L0.6-[15-100/0.01]-P[0.5-0.595/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L1-[15-100/0.01]-P[0.6-0.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L1.5-[15-100/0.01]-P[1-1.495/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L2-[15-100/0.01]-P[1.5-1.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L2.5-[15-100/0.01]-P[2-2.495/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L3-[15-100/0.01]-P[2.5-2.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L3.5-[15-120/0.01]-P[3-3.495/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L4-[15-120/0.01]-P[3.5-3.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L4.5-[15-120/0.01]-P[4-4.495/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L5-[15-120/0.01]-P[4.5-4.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L6-[15-120/0.01]-P[5-5.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L7-[15-120/0.01]-P[6-6.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L8-[15-120/0.01]-P[7-7.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L10-[15-120/0.01]-P[8-9.995/0.005]-E[0.02-0.05/0.01] |
GW-CPVB-L13-[15-120/0.01]-P[10-12.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPV-L1-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L1.2-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L1.5-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L2-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L2.5-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L3-[15-100/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L3.5-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L4-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L4.5-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L5-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L6-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L7-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L8-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L10-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPV-L13-[15-120/0.01]-E[0.02-0.05/0.01] |
GWS-CPVB-L1.5-[15-100/0.01]-P[1-1.495/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L2-[15-100/0.01]-P[1.5-1.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L2.5-[15-100/0.01]-P[2-2.495/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L3-[15-100/0.01]-P[2.5-2.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L3.5-[15-120/0.01]-P[3-3.495/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L4-[15-120/0.01]-P[3.5-3.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L4.5-[15-120/0.01]-P[4-4.495/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L5-[15-120/0.01]-P[4.5-4.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L6-[15-120/0.01]-P[5-5.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L7-[15-120/0.01]-P[6-6.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L8-[15-120/0.01]-P[7-7.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L10-[15-120/0.01]-P[8-9.995/0.005]-E[0.02-0.05/0.01] |
GWS-CPVB-L13-[15-120/0.01]-P[10-12.995/0.005]-E[0.02-0.05/0.01] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Shaft diameter tolerance | L dimension tolerance | D/P (Shaft diameter) (mm) | Gas release shape | No. (Nominal diameter) (mm) | L (L dimension) (mm) | E (Facet cutting depth) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.5 | Single flat cutting | - | 15 ~ 60 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.6 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.7 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.8 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.9 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.2 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.5 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2.5 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3 | Single flat cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3.5 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4.5 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 5 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 6 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 7 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 8 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 10 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 13 | Single flat cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.5 ~ 0.595 | Single flat cutting | 0.6 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 0.6 ~ 0.995 | Single flat cutting | 1 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1 ~ 1.495 | Single flat cutting | 1.5 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.5 ~ 1.995 | Single flat cutting | 2 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2 ~ 2.495 | Single flat cutting | 2.5 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2.5 ~ 2.995 | Single flat cutting | 3 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3 ~ 3.495 | Single flat cutting | 3.5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3.5 ~ 3.995 | Single flat cutting | 4 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4 ~ 4.495 | Single flat cutting | 4.5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4.5 ~ 4.995 | Single flat cutting | 5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 5 ~ 5.995 | Single flat cutting | 6 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 6 ~ 6.995 | Single flat cutting | 7 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 7 ~ 7.995 | Single flat cutting | 8 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 8 ~ 9.995 | Single flat cutting | 10 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 10 ~ 12.995 | Single flat cutting | 13 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.2 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.5 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2.5 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3 | Four flats cutting | - | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3.5 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4.5 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 5 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 6 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 7 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 8 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 10 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 13 | Four flats cutting | - | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1 ~ 1.495 | Four flats cutting | 1.5 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 1.5 ~ 1.995 | Four flats cutting | 2 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2 ~ 2.495 | Four flats cutting | 2.5 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 2.5 ~ 2.995 | Four flats cutting | 3 | 15 ~ 100 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3 ~ 3.495 | Four flats cutting | 3.5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 3.5 ~ 3.995 | Four flats cutting | 4 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4 ~ 4.495 | Four flats cutting | 4.5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 4.5 ~ 4.995 | Four flats cutting | 5 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 5 ~ 5.995 | Four flats cutting | 6 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 6 ~ 6.995 | Four flats cutting | 7 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 7 ~ 7.995 | Four flats cutting | 8 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 8 ~ 9.995 | Four flats cutting | 10 | 15 ~ 120 | 0.02 ~ 0.05 | ||
- | CORE PIN | 1 Piece(s) | 5 Day(s) | 10 | 0/-0.005 | +0.01/0 | 10 ~ 12.995 | Four flats cutting | 13 | 15 ~ 120 | 0.02 ~ 0.05 |
Loading...
Shape type | Gas release | Material | SKH51 | Quenching | Hardening steel |
---|---|---|---|---|---|
Head thickness | 4mm(T4) | Tip shape | No | Character engraving type | No |
Number of engraving characters | No |
How can we improve?
How can we improve?