(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
This is a pilot punch that is installed on the stripper plate, and the punch holding part and tip positioning part have the same diameter. This is effective when the installation pitch of the pilot punch is small. You can choose from a regular polished finish, a TiCN coating to improve wear resistance, or a lapping tip to improve surface roughness.
Part Number |
---|
H-HTFR1.6-[10-40/0.1]-P[1-1.6/0.01] |
H-HTFR2.0-[10-40/0.1]-P[1-2/0.01] |
H-HTFR2.5-[10-40/0.1]-P[1.5-2.5/0.01] |
H-HTFR3-[10-40/0.1]-P[2-3/0.01] |
H-HTFR4-[10-40/0.1]-P[3-4/0.01] |
H-HTFR5-[10-40/0.1]-P[4-5/0.01] |
H-HTFR6-[10-40/0.1]-P[5-6/0.01] |
H-HTFR8-[10-40/0.1]-P[6-8/0.01] |
H-HTFR10-[10-40/0.1]-P[8-10/0.01] |
H-HTFR13-[10-40/0.1]-P[10-13/0.01] |
H-HTFR16-[10-40/0.1]-P[13-16/0.01] |
H-PTFR1.6-[10-40/0.1]-P[1-1.6/0.01] |
H-PTFR2.0-[10-40/0.1]-P[1-2/0.01] |
H-PTFR2.5-[10-40/0.1]-P[1.5-2.5/0.01] |
H-PTFR3-[10-40/0.1]-P[2-3/0.01] |
H-PTFR4-[10-40/0.1]-P[3-4/0.01] |
H-PTFR5-[10-40/0.1]-P[4-5/0.01] |
H-PTFR6-[10-40/0.1]-P[5-6/0.01] |
H-PTFR8-[10-40/0.1]-P[6-8/0.01] |
H-PTFR10-[10-40/0.1]-P[8-10/0.01] |
H-PTFR13-[10-40/0.1]-P[10-13/0.01] |
H-PTFR16-[10-40/0.1]-P[13-16/0.01] |
HTFR1.6-[10-40/0.1]-P[0.5-1.6/0.01] |
HTFR2.0-[10-40/0.1]-P[1-2/0.01] |
HTFR2.5-[10-40/0.1]-P[1.5-2.5/0.01] |
HTFR3-[10-40/0.1]-P[2-3/0.01] |
HTFR4-[10-40/0.1]-P[3-4/0.01] |
HTFR5-[10-40/0.1]-P[4-5/0.01] |
HTFR6-[10-40/0.1]-P[5-6/0.01] |
HTFR8-[10-40/0.1]-P[6-8/0.01] |
HTFR10-[10-40/0.1]-P[8-10/0.01] |
HTFR13-[10-40/0.1]-P[10-13/0.01] |
HTFR16-[10-40/0.1]-P[13-16/0.01] |
L-HTFR1.6-[10-40/0.1]-P[0.5-1.6/0.001] |
L-HTFR2.0-[10-40/0.1]-P[1-2/0.001] |
L-HTFR2.5-[10-40/0.1]-P[1.5-2.5/0.001] |
L-HTFR3-[10-40/0.1]-P[2-3/0.001] |
L-HTFR4-[10-40/0.1]-P[3-4/0.001] |
L-HTFR5-[10-40/0.1]-P[4-5/0.001] |
L-HTFR6-[10-40/0.1]-P[5-6/0.001] |
L-HTFR8-[10-40/0.1]-P[6-8/0.001] |
L-HTFR10-[10-40/0.1]-P[8-10/0.001] |
L-HTFR13-[10-40/0.1]-P[10-13/0.001] |
L-HTFR16-[10-40/0.1]-P[13-16/0.001] |
L-PTFR1.6-[10-40/0.1]-P[0.5-1.6/0.001] |
L-PTFR2.0-[10-40/0.1]-P[1-2/0.001] |
L-PTFR2.5-[10-40/0.1]-P[1.5-2.5/0.001] |
L-PTFR3-[10-40/0.1]-P[2-3/0.001] |
L-PTFR4-[10-40/0.1]-P[3-4/0.001] |
L-PTFR5-[10-40/0.1]-P[4-5/0.001] |
L-PTFR6-[10-40/0.1]-P[5-6/0.001] |
L-PTFR8-[10-40/0.1]-P[6-8/0.001] |
L-PTFR10-[10-40/0.1]-P[8-10/0.001] |
L-PTFR13-[10-40/0.1]-P[10-13/0.001] |
L-PTFR16-[10-40/0.1]-P[13-16/0.001] |
L-SPT1.6-[10-40/0.1]-P[0.5-1.6/0.001] |
L-SPT2.0-[10-40/0.1]-P[1-2/0.001] |
L-SPT2.5-[10-40/0.1]-P[1.5-2.5/0.001] |
L-SPT3-[10-40/0.1]-P[2-3/0.001] |
L-SPT4-[10-40/0.1]-P[3-4/0.001] |
L-SPT5-[10-40/0.1]-P[4-5/0.001] |
L-SPT6-[10-40/0.1]-P[5-6/0.001] |
L-SPT8-[10-40/0.1]-P[6-8/0.001] |
L-SPT10-[10-40/0.1]-P[8-10/0.001] |
L-SPT13-[10-40/0.1]-P[10-13/0.001] |
L-SPT16-[10-40/0.1]-P[13-16/0.001] |
PTFR1.6-[10-40/0.1]-P[0.5-1.6/0.01] |
PTFR2.0-[10-40/0.1]-P[1-2/0.01] |
PTFR2.5-[10-40/0.1]-P[1.5-2.5/0.01] |
PTFR3-[10-40/0.1]-P[2-3/0.01] |
PTFR4-[10-40/0.1]-P[3-4/0.01] |
PTFR5-[10-40/0.1]-P[4-5/0.01] |
PTFR6-[10-40/0.1]-P[5-6/0.01] |
PTFR8-[10-40/0.1]-P[6-8/0.01] |
PTFR10-[10-40/0.1]-P[8-10/0.01] |
PTFR13-[10-40/0.1]-P[10-13/0.01] |
PTFR16-[10-40/0.1]-P[13-16/0.01] |
SPT1.6-[10-40/0.1]-P[0.5-1.6/0.01] |
SPT2.0-[10-40/0.1]-P[1-2/0.01] |
SPT2.5-[10-40/0.1]-P[1.5-2.5/0.01] |
SPT3-[10-40/0.1]-P[2-3/0.01] |
SPT4-[10-40/0.1]-P[3-4/0.01] |
SPT5-[10-40/0.1]-P[4-5/0.01] |
SPT6-[10-40/0.1]-P[5-6/0.01] |
SPT8-[10-40/0.1]-P[6-8/0.01] |
SPT10-[10-40/0.1]-P[8-10/0.01] |
SPT13-[10-40/0.1]-P[10-13/0.01] |
SPT16-[10-40/0.1]-P[13-16/0.01] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Tip shape | Material | Surface treatment | No. (Nominal diameter) (mm) | L (L dimension) (mm) | A (Taper angle) (°) | Tip angle change [AC] (°) | P (Tip dimension) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 1.6 | 10 ~ 40 | - | - | 1 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | TiCN | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 1.6 | 10 ~ 40 | - | - | 1 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | TiCN | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | None | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKH51 Equivalent | Lapping | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | Lapping | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | Lapping | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | Powdered high-speed steel | None | 16 | 10 ~ 40 | - | - | 13 ~ 16 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 1.6 | 10 ~ 40 | - | - | 0.5 ~ 1.6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 2.0 | 10 ~ 40 | - | - | 1 ~ 2 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 2.5 | 10 ~ 40 | - | - | 1.5 ~ 2.5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 3 | 10 ~ 40 | - | - | 2 ~ 3 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 4 | 10 ~ 40 | - | - | 3 ~ 4 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 5 | 10 ~ 40 | - | - | 4 ~ 5 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 6 | 10 ~ 40 | - | - | 5 ~ 6 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 8 | 10 ~ 40 | - | - | 6 ~ 8 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 10 | 10 ~ 40 | - | - | 8 ~ 10 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 13 | 10 ~ 40 | - | - | 10 ~ 13 | ||
- | PILOT PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Tip R | SKD11 Equivalent | None | 16 | 10 ~ 40 | - | - | 13 ~ 16 |
Loading...
Shank type | Standard | Mounting plate | Stripper plate | Shank (mounting part) shape | Standard |
---|
How can we improve?
How can we improve?