(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(132 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

ATTMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]

Tip shape Material Surface treatment No. (Nominal diameter) L (L dimension) A (Taper angle) LC (Full length alteration) P (Tip dimension) type CAD Days to Ship

Specification/Dimensions

Tip shape
- Tip R
- Tapered tip
- Sharp tip angle
Clear
Material
- SKD11 Equivalent
- Powdered high-speed steel
Clear
Surface treatment
- None
- TiCN
- Without DLC foundation
Clear
No. (Nominal diameter)(mm)
- 8
- 10
- 13
- 16
- 20
- 25
Clear
L (L dimension)(mm)
[42-92/10mm Unit(s)]
Clear
A (Taper angle)(°)
[15-30/5° Unit(s)]
Clear
LC (Full length alteration)(mm)
[25-91.9/0.1mm Unit(s)]
Clear
P (Tip dimension)(mm)
[6-25/0.01mm Unit(s)]
Clear
type
- ATTMC
- H-PATMC
- H-PSTMC
- H-PTTMC
- N-PATMC
- N-PSTMC
- PATMC
- PSTMC
- PTTMC
- STMC
- TTMC
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

3 Day(s) or Less

5 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

Tapped Straight Pilot Punches Normal, TiCN Coating, DLC Coating

Compare This Product

BOLT
SKD11
POWDER HSS
TiCN
DLC

Brand :

Part Number :

ATTMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]

ATTMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]

ATTMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]

ATTMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]

ATTMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]

ATTMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]

ATTMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]

ATTMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]

ATTMC20-[42-72/10]-P[16-20/0.01]-A[20-30/5]

ATTMC20-LC[25-71.9/0.1]-P[16-20/0.01]-A[20-30/5]

ATTMC25-[42-72/10]-P[20-25/0.01]-A[25-30/5]

ATTMC25-LC[25-71.9/0.1]-P[20-25/0.01]-A[25-30/5]

H-PATMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]

H-PATMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]

H-PATMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]

H-PATMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]

H-PATMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]

H-PATMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]

H-PATMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]

H-PATMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]

ATTMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)Caution

กรุณาตรวจสอบรหัสสินค้าที่ถูกต้องก่อนขอราคาและสั่งซื้อ เนื่องจากเป็นสินค้าสั่งทำจึงไม่สามารถเปลี่ยนคืนได้
- หากเลือกความยาวแบบ LC ค่า B จะไม่สามารถอ้างอิงตามตาราง standard ได้
- สอบถามข้อมูลเพิ่มเติม ติดต่อมิซูมิ
Please recheck part number before quoting or ordering products, due to this is made-to-order item and cannot be returned.
If you have any questions, please contact MISUMI.

Product Description

กรุณาตรวจสอบรหัสสินค้าที่ถูกต้องก่อนขอราคาและสั่งซื้อ เนื่องจากเป็นสินค้าสั่งทำจึงไม่สามารถเปลี่ยนคืนได้
- หากเลือกความยาวแบบ LC ค่า B จะไม่สามารถอ้างอิงตามตาราง standard ได้
- สอบถามข้อมูลเพิ่มเติม ติดต่อมิซูมิ
Please recheck part number before quoting or ordering products, due to this is made-to-order item and cannot be returned.
If you have any questions, please contact MISUMI.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
ATTMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]
ATTMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]
ATTMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]
ATTMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]
ATTMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]
ATTMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]
ATTMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]
ATTMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]
ATTMC20-[42-72/10]-P[16-20/0.01]-A[20-30/5]
ATTMC20-LC[25-71.9/0.1]-P[16-20/0.01]-A[20-30/5]
ATTMC25-[42-72/10]-P[20-25/0.01]-A[25-30/5]
ATTMC25-LC[25-71.9/0.1]-P[20-25/0.01]-A[25-30/5]
H-PATMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]
H-PATMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]
H-PATMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]
H-PATMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]
H-PATMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]
H-PATMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]
H-PATMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]
H-PATMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]
H-PATMC20-[42-72/10]-P[16-20/0.01]-A[20-30/5]
H-PATMC20-LC[25-71.9/0.1]-P[16-20/0.01]-A[20-30/5]
H-PATMC25-[42-72/10]-P[20-25/0.01]-A[25-30/5]
H-PATMC25-LC[25-71.9/0.1]-P[20-25/0.01]-A[25-30/5]
H-PSTMC8-[42-92/10]-P[6-8/0.01]
H-PSTMC8-LC[25-91.9/0.1]-P[6-8/0.01]
H-PSTMC10-[42-92/10]-P[8-10/0.01]
H-PSTMC10-LC[25-91.9/0.1]-P[8-10/0.01]
H-PSTMC13-[42-92/10]-P[10-13/0.01]
H-PSTMC13-LC[25-91.9/0.1]-P[10-13/0.01]
H-PSTMC16-[42-92/10]-P[13-16/0.01]
H-PSTMC16-LC[25-91.9/0.1]-P[13-16/0.01]
H-PSTMC20-[42-92/10]-P[16-20/0.01]
H-PSTMC20-LC[25-91.9/0.1]-P[16-20/0.01]
H-PSTMC25-[42-92/10]-P[20-25/0.01]
H-PSTMC25-LC[25-91.9/0.1]-P[20-25/0.01]
H-PTTMC8-[42-92/10]-P[6-8/0.01]
H-PTTMC8-LC[25-91.9/0.1]-P[6-8/0.01]
H-PTTMC10-[42-92/10]-P[8-10/0.01]
H-PTTMC10-LC[25-91.9/0.1]-P[8-10/0.01]
H-PTTMC13-[42-92/10]-P[10-13/0.01]
H-PTTMC13-LC[25-91.9/0.1]-P[10-13/0.01]
H-PTTMC16-[42-92/10]-P[13-16/0.01]
H-PTTMC16-LC[25-91.9/0.1]-P[13-16/0.01]
H-PTTMC20-[42-92/10]-P[16-20/0.01]
H-PTTMC20-LC[25-91.9/0.1]-P[16-20/0.01]
H-PTTMC25-[42-92/10]-P[20-25/0.01]
H-PTTMC25-LC[25-91.9/0.1]-P[20-25/0.01]
N-PATMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]
N-PATMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]
N-PATMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]
N-PATMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]
N-PATMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]
N-PATMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]
N-PATMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]
N-PATMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]
N-PATMC20-[42-72/10]-P[16-20/0.01]-A[20-30/5]
N-PATMC20-LC[25-71.9/0.1]-P[16-20/0.01]-A[20-30/5]
N-PATMC25-[42-72/10]-P[20-25/0.01]-A[25-30/5]
N-PATMC25-LC[25-71.9/0.1]-P[20-25/0.01]-A[25-30/5]
N-PSTMC8-[42-92/10]-P[6-8/0.01]
N-PSTMC8-LC[25-91.9/0.1]-P[6-8/0.01]
N-PSTMC10-[42-92/10]-P[8-10/0.01]
N-PSTMC10-LC[25-91.9/0.1]-P[8-10/0.01]
N-PSTMC13-[42-92/10]-P[10-13/0.01]
N-PSTMC13-LC[25-91.9/0.1]-P[10-13/0.01]
N-PSTMC16-[42-92/10]-P[13-16/0.01]
N-PSTMC16-LC[25-91.9/0.1]-P[13-16/0.01]
N-PSTMC20-[42-92/10]-P[16-20/0.01]
N-PSTMC20-LC[25-91.9/0.1]-P[16-20/0.01]
N-PSTMC25-[42-92/10]-P[20-25/0.01]
N-PSTMC25-LC[25-91.9/0.1]-P[20-25/0.01]
PATMC8-[42-72/10]-P[6-8/0.01]-A[15-30/5]
PATMC8-LC[25-71.9/0.1]-P[6-8/0.01]-A[15-30/5]
PATMC10-[42-72/10]-P[8-10/0.01]-A[15-30/5]
PATMC10-LC[25-71.9/0.1]-P[8-10/0.01]-A[15-30/5]
PATMC13-[42-72/10]-P[10-13/0.01]-A[15-30/5]
PATMC13-LC[25-71.9/0.1]-P[10-13/0.01]-A[15-30/5]
PATMC16-[42-72/10]-P[13-16/0.01]-A[15-30/5]
PATMC16-LC[25-71.9/0.1]-P[13-16/0.01]-A[15-30/5]
PATMC20-[42-72/10]-P[16-20/0.01]-A[20-30/5]
PATMC20-LC[25-71.9/0.1]-P[16-20/0.01]-A[20-30/5]
PATMC25-[42-72/10]-P[20-25/0.01]-A[25-30/5]
PATMC25-LC[25-71.9/0.1]-P[20-25/0.01]-A[25-30/5]
PSTMC8-[42-92/10]-P[6-8/0.01]
PSTMC8-LC[25-91.9/0.1]-P[6-8/0.01]
PSTMC10-[42-92/10]-P[8-10/0.01]
PSTMC10-LC[25-91.9/0.1]-P[8-10/0.01]
PSTMC13-[42-92/10]-P[10-13/0.01]
PSTMC13-LC[25-91.9/0.1]-P[10-13/0.01]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Tip shape	Material	Surface treatment	No. (Nominal diameter) (mm)	L (L dimension) (mm)	A (Taper angle) (°)	LC (Full length alteration) (mm)	P (Tip dimension) (mm)
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	8	42 ～ 72	15 ～ 30	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	8	-	15 ～ 30	25 ～ 71.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	10	42 ～ 72	15 ～ 30	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	10	-	15 ～ 30	25 ～ 71.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	13	42 ～ 72	15 ～ 30	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	13	-	15 ～ 30	25 ～ 71.9	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	16	42 ～ 72	15 ～ 30	-	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	16	-	15 ～ 30	25 ～ 71.9	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	20	42 ～ 72	20 ～ 30	-	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	20	-	20 ～ 30	25 ～ 71.9	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	25	42 ～ 72	25 ～ 30	-	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	2 Day(s)	10	Sharp tip angle	SKD11 Equivalent	None	25	-	25 ～ 30	25 ～ 71.9	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	8	42 ～ 72	15 ～ 30	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	8	-	15 ～ 30	25 ～ 71.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	10	42 ～ 72	15 ～ 30	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	10	-	15 ～ 30	25 ～ 71.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	3 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	13	42 ～ 72	15 ～ 30	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	3 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	13	-	15 ～ 30	25 ～ 71.9	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	3 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	16	42 ～ 72	15 ～ 30	-	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	3 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	16	-	15 ～ 30	25 ～ 71.9	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	20	42 ～ 72	20 ～ 30	-	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	20	-	20 ～ 30	25 ～ 71.9	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	25	42 ～ 72	25 ～ 30	-	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	TiCN	25	-	25 ～ 30	25 ～ 71.9	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	8	42 ～ 92	-	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	8	-	-	25 ～ 91.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	10	42 ～ 92	-	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	10	-	-	25 ～ 91.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	13	42 ～ 92	-	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	13	-	-	25 ～ 91.9	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	16	42 ～ 92	-	-	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	16	-	-	25 ～ 91.9	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	20	42 ～ 92	-	-	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	20	-	-	25 ～ 91.9	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	25	42 ～ 92	-	-	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	TiCN	25	-	-	25 ～ 91.9	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	8	42 ～ 92	-	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	8	-	-	25 ～ 91.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	10	42 ～ 92	-	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	10	-	-	25 ～ 91.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	13	42 ～ 92	-	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	13	-	-	25 ～ 91.9	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	16	42 ～ 92	-	-	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	16	-	-	25 ～ 91.9	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	20	42 ～ 92	-	-	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	20	-	-	25 ～ 91.9	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	25	42 ～ 92	-	-	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tapered tip	Powdered high-speed steel	TiCN	25	-	-	25 ～ 91.9	20 ～ 25
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	8	42 ～ 72	15 ～ 30	-	6 ～ 8
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	8	-	15 ～ 30	25 ～ 71.9	6 ～ 8
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	10	42 ～ 72	15 ～ 30	-	8 ～ 10
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	10	-	15 ～ 30	25 ～ 71.9	8 ～ 10
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	13	42 ～ 72	15 ～ 30	-	10 ～ 13
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	13	-	15 ～ 30	25 ～ 71.9	10 ～ 13
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	16	42 ～ 72	15 ～ 30	-	13 ～ 16
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	16	-	15 ～ 30	25 ～ 71.9	13 ～ 16
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	20	42 ～ 72	20 ～ 30	-	16 ～ 20
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	20	-	20 ～ 30	25 ～ 71.9	16 ～ 20
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	25	42 ～ 72	25 ～ 30	-	20 ～ 25
-	TAPPED PILOT P_DLC_N-PATMC	1 Piece(s)	10 Day(s)	10	Sharp tip angle	Powdered high-speed steel	Without DLC foundation	25	-	25 ～ 30	25 ～ 71.9	20 ～ 25
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	8	42 ～ 92	-	-	6 ～ 8
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	8	-	-	25 ～ 91.9	6 ～ 8
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	10	42 ～ 92	-	-	8 ～ 10
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	10	-	-	25 ～ 91.9	8 ～ 10
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	13	42 ～ 92	-	-	10 ～ 13
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	13	-	-	25 ～ 91.9	10 ～ 13
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	16	42 ～ 92	-	-	13 ～ 16
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	16	-	-	25 ～ 91.9	13 ～ 16
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	20	42 ～ 92	-	-	16 ～ 20
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	20	-	-	25 ～ 91.9	16 ～ 20
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	25	42 ～ 92	-	-	20 ～ 25
-	TAPPED PILOT P_DLC_N-PSTMC	1 Piece(s)	10 Day(s)	10	Tip R	Powdered high-speed steel	Without DLC foundation	25	-	-	25 ～ 91.9	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	8	42 ～ 72	15 ～ 30	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	8	-	15 ～ 30	25 ～ 71.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	10	42 ～ 72	15 ～ 30	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	10	-	15 ～ 30	25 ～ 71.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	13	42 ～ 72	15 ～ 30	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	13	-	15 ～ 30	25 ～ 71.9	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	16	42 ～ 72	15 ～ 30	-	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	16	-	15 ～ 30	25 ～ 71.9	13 ～ 16
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	20	42 ～ 72	20 ～ 30	-	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	20	-	20 ～ 30	25 ～ 71.9	16 ～ 20
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	25	42 ～ 72	25 ～ 30	-	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Sharp tip angle	Powdered high-speed steel	None	25	-	25 ～ 30	25 ～ 71.9	20 ～ 25
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	8	42 ～ 92	-	-	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	8	-	-	25 ～ 91.9	6 ～ 8
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	10	42 ～ 92	-	-	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	10	-	-	25 ～ 91.9	8 ～ 10
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	13	42 ～ 92	-	-	10 ～ 13
-	PILOT PUNCH	1 Piece(s)	5 Day(s)	10	Tip R	Powdered high-speed steel	None	13	-	-	25 ～ 91.9	10 ～ 13

Product TOP

Basic Information

Shank type	Straight	Mounting plate	Punch plate	Shank (mounting part) shape	Tapped

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Top of the page

Payment Methods

Credit Card

Bank

Prompt Pay

Cash: Cash On Delivery

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 8:00 - 18:00 (Mon-Sat),*Order cut off time is 17:00 / Online order cut off time is 18:00

Tel:

033-684730
Email: cs@misumi.co.th

Chat Now

Categories

Search by Category

Categories

Search by Category

How can we improve?