(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(72 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

H-HSKC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]

Specification/Dimensions

Material
- SKD11 Equivalent
- SKH51 Equivalent
- Powdered high-speed steel
- SKH51 or SKD11 Equivalent
Clear
Surface treatment
- None
- TiCN
Clear
Punch shank (mounting part) shape
- Standard
- Tapped
- With key groove
Clear
No.(No.)
- 1
- 2
- 3
Clear
A(mm)
[0.5-30/0.01mm Unit(s)]
Clear
B(mm)
Clear
C(mm)
0
Clear
Catalog No. input/L (L dimension)(mm)
Clear
K
0

90

180

270
[0-270/90]
Clear
L (L dimension)(mm)
[40-80/10mm Unit(s)]
Clear
LC (Full length alteration)(mm)
[30-79.9/0.1mm Unit(s)]
Clear
Other specifications
- ※Designate with WOS
Clear
P(mm)
[2-30/0.01mm Unit(s)]
Clear
Q(mm)
0
Clear
R(mm)
0
Clear
S(mm)
0
Clear
T
[2-60/0.1]
Clear
W(mm)
[2-30/0.01mm Unit(s)]
Clear
type
- H-HSKC(2-12)H
- H-HSKC(2-28)J
- H-HSKC(2-7)L
- H-HSKC(3-28)K
- H-HSMC(2-12)H
- H-HSMC(2-18)J
- H-HSMC(2-7)L
- H-HSMC(3-28)K
- H-HSPC(2-12)H
- H-HSPC(2-18)J
- H-HSPC(2-7)L
- H-HSPC(3-28)K
- H-PHKC(2-12)H
- H-PHKC(2-18)J
- H-PHKC(2-7)L
- H-PHKC(3-28)K
- H-PHMC(2-12)H
- H-PHMC(2-18)J
- H-PHMC(2-7)L
- H-PHMC(3-28)K
- H-PHPC(2-12)H
- H-PHPC(2-18)J
- H-PHPC(2-7)L
- H-PHPC(3-28)K
- HKC(2-12)H
- HKC(2-18)J
- HKC(2-7)L
- HKC(3-28)K
- HMC(2-12)H
- HMC(2-18)J
- HMC(2-7)L
- HMC(3-28)K
- HPC(2-12)H
- HPC(2-18)J
- HPC(2-7)L
- HPC(3-28)K
- PHKC(2-12)H
- PHKC(2-18)J
- PHKC(2-7)L
- PHKC(3-28)K
- PHMC(2-12)H
- PHMC(2-18)J
- PHMC(2-7)L
- PHMC(3-28)K
- PHPC(2-12)H
- PHPC(2-18)J
- PHPC(2-7)L
- PHPC(3-28)K
Clear
Tip shape
2H

4H

5H

6H

7H

8H

9H

10H

11H

12H

2J

3J

4J

5J

8J

9J

10J

11J

12J

13J

14J

15J

16J

17J

18J

3K

4K

5K

6K

8K

9K

10K

13K

14K

15K

17K

18K

20K

21K

22K

23K

25K

27K

28K

2L

3L

4L

5L

7L
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less

14 Day(s) or Less
Clear

Specify Alterations

Special Shaped Straight Punches (Part Number)

Name: Special Shaped Straight Punches
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Compare This Product

SKH51
SKD11
POWDER HSS
TiCN

Brand :

MISUMI

Part Number :

H-HSKC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSKC3J-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSKC3J-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSKC3J-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSKC3J-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSKC3J-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]

H-HSMC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]

H-HSMC3J-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]

H-HSMC3J-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]

H-HSMC3J-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]

H-HSMC3J-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]

H-HSMC3J-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]

H-HSPC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]

H-HSPC3J-1-*-******-LC[30-79/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]

H-HSPC3J-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]

H-HSPC3J-2-*-******-LC[30-79/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]

H-HSPC3J-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]

H-HSPC3J-3-*-******-LC[30-79/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]

H-PHKC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]

H-PHKC3J-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]

H-HSKC3J-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

A straight punch with an unusual shape. The material can be selected from die steel, high speed steel, and powder high speed steel.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
H-HSKC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC3J-1--*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC3J-2--*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC3J-3--*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSMC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-HSMC3J-1--*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-HSMC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-HSMC3J-2--*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-HSMC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-HSMC3J-3--*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-HSPC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-HSPC3J-1--*****-LC[30-79/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-HSPC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-HSPC3J-2--*****-LC[30-79/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-HSPC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-HSPC3J-3--*****-LC[30-79/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-PHKC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHKC3J-1--*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHKC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHKC3J-2--*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHKC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHKC3J-3--*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0,90,180,270]-T[2-60/0.1]
H-PHMC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-PHMC3J-1--*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-PHMC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-PHMC3J-2--*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-PHMC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-PHMC3J-3--*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-PHPC3J-1--*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-PHPC3J-1--*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
H-PHPC3J-2--*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-PHPC3J-2--*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
H-PHPC3J-3--*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
H-PHPC3J-3--*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
HKC3J-1-*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]
HKC3J-1-*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0-270/90]-T[2-60/0.1]
HKC3J-2-*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]
HKC3J-2-*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0-270/90]-T[2-60/0.1]
HKC3J-3-*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]
HKC3J-3-*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0-270/90]-T[2-60/0.1]
HMC3J-1-*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
HMC3J-1-*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
HMC3J-2-*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
HMC3J-2-*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
HMC3J-3-*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
HMC3J-3-*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
HPC3J-1-*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
HPC3J-1-*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
HPC3J-2-*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
HPC3J-2-*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
HPC3J-3-*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
HPC3J-3-*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
PHKC3J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHKC3J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHKC3J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHKC3J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHKC3J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHKC3J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]-K[0,90,180,270]-T[2-60/0.1]
PHMC3J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
PHMC3J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
PHMC3J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
PHMC3J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
PHMC3J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
PHMC3J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
PHPC3J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
PHPC3J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[0.5-10/0.01]
PHPC3J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
PHPC3J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[0.5-20/0.01]
PHPC3J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]
PHPC3J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[0.5-30/0.01]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Tip shape	Material	Surface treatment	Punch shank (mounting part) shape	No. (No.)	A (mm)	B (mm)	C (mm)	Catalog No. input/L (L dimension) (mm)	K	L (L dimension) (mm)	LC (Full length alteration) (mm)	Other specifications	P (mm)	Q (mm)	R (mm)	S (mm)	T	W (mm)
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Tapped	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	SKH51 Equivalent	TiCN	Standard	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Tapped	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	COATING BLOCK	1 Piece(s)	14 Day(s)	10	3J	Powdered high-speed steel	TiCN	Standard	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	Tapped	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	Tapped	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Tapped	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Tapped	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Tapped	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Tapped	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	Standard	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKH51 or SKD11 Equivalent	None	Standard	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Standard	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Standard	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Standard	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	SKD11 Equivalent	None	Standard	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	1	0.5 ～ 10	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	2 ～ 60	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	2	0.5 ～ 20	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	2 ～ 60	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	With key groove	3	0.5 ～ 30	-	-	-	0 ～ 270	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	2 ～ 60	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Tapped	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	1	0.5 ～ 10	-	-	-	-	40 ～ 80	-	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	1	0.5 ～ 10	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	2 ～ 30	-	-	-	-	2 ～ 10
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	2	0.5 ～ 20	-	-	-	-	40 ～ 80	-	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	2	0.5 ～ 20	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	10.01 ～ 30	-	-	-	-	10.01 ～ 20
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	3	0.5 ～ 30	-	-	-	-	40 ～ 80	-	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30
-	PUNCH	1 Piece(s)	10 Day(s)	10	3J	Powdered high-speed steel	None	Standard	3	0.5 ～ 30	-	-	-	-	-	30 ～ 79.9	※Designate with WOS	20.01 ～ 30	-	-	-	-	20.01 ～ 30