(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
A punch with a guide section separate from the cutting edge. Please use this when the diameter of the cutting edge is small and it is difficult to secure the necessary cutting edge length for the guide.
Part Number |
---|
A-PHTWA1.6-[20,25,30,35,40,50,60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
A-PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
A-PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
A-PHTWA1.6-LMT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
A-PHTWA2.0-[20,25,30,35,40,50,60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
A-PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
A-PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
A-PHTWA2.0-LMT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
A-PHTWA2.5-[20,25,30,35,40,50,60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
A-PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
A-PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
A-PHTWA2.5-LMT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
PHTWA1.6-[20,25,30,35,40,50,60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
PHTWA1.6-LMT[20-49.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1] |
PHTWA2.0-[20,25,30,35,40,50,60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
PHTWA2.0-LMT[20-49.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1] |
PHTWA2.5-[20,25,30,35,40,50,60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
PHTWA2.5-LMT[20-49.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Material | Shank diameter D tolerance | D (Shank diameter) (mm) | P (Tip dimension) (mm) | L (L dimension) (mm) | B (Tip length) (mm) | F (Length from tip end to second step R) (mm) | LC (Full length alteration) (mm) | LCT (Head thickness tolerance change + Total length alteration) (mm) | LMT (Head thickness tolerance change + Total length alteration) (mm) | V (Second step tip diameter) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 1.6 | 0.3 ~ 1.56 | 20 ~ 60 | 1 ~ 10 | 2 ~ 20 | - | - | - | 0.31 ~ 1.59 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | 20 ~ 59.9 | - | - | 0.31 ~ 1.59 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | - | 20 ~ 59.9 | - | 0.31 ~ 1.59 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | - | - | 20 ~ 59.9 | 0.31 ~ 1.59 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.0 | 0.5 ~ 1.96 | 20 ~ 60 | 1 ~ 10 | 2 ~ 20 | - | - | - | 0.51 ~ 1.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | 20 ~ 59.9 | - | - | 0.51 ~ 1.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | - | 20 ~ 59.9 | - | 0.51 ~ 1.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | - | - | 20 ~ 59.9 | 0.51 ~ 1.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.5 | 0.8 ~ 2.46 | 20 ~ 60 | 1 ~ 10 | 2 ~ 35 | - | - | - | 0.51 ~ 2.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | 20 ~ 59.9 | - | - | 0.51 ~ 2.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | - | 20 ~ 59.9 | - | 0.51 ~ 2.99 | ||
- | PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | +0.005/0 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | - | - | 20 ~ 59.9 | 0.51 ~ 2.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 1.6 | 0.3 ~ 1.56 | 20 ~ 60 | 1 ~ 10 | 2 ~ 20 | - | - | - | 0.31 ~ 1.59 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | 20 ~ 59.9 | - | - | 0.31 ~ 1.59 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | - | 20 ~ 59.9 | - | 0.31 ~ 1.59 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 1.6 | 0.3 ~ 1.56 | - | 1 ~ 10 | 2 ~ 20 | - | - | 20 ~ 49.9 | 0.31 ~ 1.59 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.0 | 0.5 ~ 1.96 | 20 ~ 60 | 1 ~ 10 | 2 ~ 20 | - | - | - | 0.51 ~ 1.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | 20 ~ 59.9 | - | - | 0.51 ~ 1.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | - | 20 ~ 59.9 | - | 0.51 ~ 1.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.0 | 0.5 ~ 1.96 | - | 1 ~ 10 | 2 ~ 20 | - | - | 20 ~ 49.9 | 0.51 ~ 1.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.5 | 0.8 ~ 2.46 | 20 ~ 60 | 1 ~ 10 | 2 ~ 35 | - | - | - | 0.51 ~ 2.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | 20 ~ 59.9 | - | - | 0.51 ~ 2.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | - | 20 ~ 59.9 | - | 0.51 ~ 2.99 | ||
- | SHOULDER TWO STEPS-TYPE PUNCH | 1 Piece(s) | 3 Day(s) | 10 | Powdered high-speed steel | m5 | 2.5 | 0.8 ~ 2.46 | - | 1 ~ 10 | 2 ~ 35 | - | - | 20 ~ 49.9 | 0.51 ~ 2.99 |
Loading...
Heavy-load punches | No | Shank type | Double-stepped | Jector | None |
---|---|---|---|---|---|
Tip shape | A | Surface treatment | None | Shank (mounting part) shape | Standard |
T (Head thickness/plate thickness)(mm) | 3 |
How can we improve?
How can we improve?