(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 16/6/2024. We apologize for the inconvenience.
แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(136 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

FCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]

Specification/Dimensions

Shaft Dia. D(mm)
[4-20/1mm Unit(s)]
Clear
Basic Shape
- Shouldered
- Straight
Clear
Material
- Steel
- Stainless Steel
Clear
Hardness
- Not Spec-designed
- Hardness Requirement
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
Clear
Material Detail
- S45C
- SUS304
- SUS440C (Equivalent)
Clear
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
Clear
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
Clear
G(mm)
[0-10/0.1mm Unit(s)]
Clear
GC(mm)
[0-10/0.1mm Unit(s)]
Clear
H(mm)
[5-30/0.5mm Unit(s)]
Clear
HC(mm)
[5-30/0.5mm Unit(s)]
Clear
K(mm)
[2-30/0.1mm Unit(s)]
Clear
KC(mm)
[2-30/0.1mm Unit(s)]
Clear
L(mm)
[5-200/0.1mm Unit(s)]
Clear
M(mm)
3

4

5

6

8

10

12

16
Clear
MC(mm)
3

4

5

6

8

10

12

16
Clear
N(mm)
[0-125/0.1mm Unit(s)]
Clear
NC(mm)
[0-125/0.1mm Unit(s)]
Clear
T(mm)
[0.5-125/0.1mm Unit(s)]
Clear
TC(mm)
[0.5-125/0.1mm Unit(s)]
Clear
Y(mm)
[0-10/0.1mm Unit(s)]
Clear
YC(mm)
[0-10/0.1mm Unit(s)]
Clear
type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
Clear
Mounting Method
- Straight
- Retaining Ring
- Cotter Pin
- Nut (Threaded)
- Tapped
- Set Screw (Set Screw Flat, D-Cut)
- Keyway
- Set Screw (V Groove)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

Pivot Pins - End Shape Combination Selectable

Name: Pivot Pins - End Shape Combination Selectable
Brand: MISUMI
Availability: PreOrder

Compare This Product

Brand :

MISUMI

Part Number :

FCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]

FCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]

FCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]

FCLCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]

FCLDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]

FCLEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]

FCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]

FCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]

FCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]

FCLED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]

FCLEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]

FCLEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]

FCLEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]

FCLEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]

FCLFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]

FCLGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]

FCLHAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]

FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]

FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]

FCLHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]

FCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Shaft End Shapes are selectable.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
FCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
FCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
FCLCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
FCLEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
FCLHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
FCLHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLHFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLHGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
FCLSCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLSEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLSEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLSED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
FCLSEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLSFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
FCLSHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
FCLSHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLSHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
FCLSHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
FCLSHFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
FCLSHGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
GFCLCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]
GFCLEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]
GFCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
GFCLED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5]
GFCLEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
GFCLEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
GFCLEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1]
GFCLFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16]
GFCLGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16]
GFCLSHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Shaft Dia. D (mm)	Mounting Method	Basic Shape	Material	Hardness	Surface Treatment	Material Detail	Left End Shape	Right End Shape	G (mm)	GC (mm)	H (mm)	HC (mm)	K (mm)	KC (mm)	L (mm)	M (mm)	MC (mm)	N (mm)	NC (mm)	T (mm)	TC (mm)	Y (mm)	YC (mm)
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Not Spec-designed	Black Oxide	S45C	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Not Spec-designed	Black Oxide	S45C	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Not Spec-designed	Black Oxide	S45C	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Not Spec-designed	Black Oxide	S45C	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Hardness Requirement	Black Oxide	S45C	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Not Spec-designed	Black Oxide	S45C	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Hardness Requirement	Black Oxide	S45C	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Hardness Requirement	Black Oxide	S45C	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Black Oxide	S45C	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Black Oxide	S45C	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Not Spec-designed	Not Provided	SUS304	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Not Spec-designed	Not Provided	SUS304	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Stainless Steel	Hardness Requirement	Not Provided	SUS440C (Equivalent)	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	A	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	B	-	0 ～ 10	-	-	-	-	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	B	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 10	-	0 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	D	-	-	-	5 ～ 30	-	-	5 ～ 200	3 ～ 16	-	-	-	-	0.5 ～ 125	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	F	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	G	-	-	-	-	-	2 ～ 30	5 ～ 200	3 ～ 16	-	-	0 ～ 125	-	-	-	0 ～ 10
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	E	H	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 125	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Tapped	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	F	E	-	-	-	-	-	-	5 ～ 200	3 ～ 16	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	G	E	-	-	-	-	2 ～ 30	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	0 ～ 10	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Nut (Threaded) / Set Screw (V Groove)	Straight	Steel	Hardness Requirement	Hard Chrome Plating	S45C	H	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Hard Chrome Plating	SUS440C (Equivalent)	A	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	-	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Hard Chrome Plating	SUS440C (Equivalent)	B	E	0 ～ 10	-	-	-	-	-	5 ～ 200	-	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	6 ～ 20	Cotter Pin / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Hard Chrome Plating	SUS440C (Equivalent)	B	E	-	-	-	-	-	-	5 ～ 200	3 ～ 10	3 ～ 16	0 ～ 125	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Retaining Ring / Nut (Threaded)	Straight	Stainless Steel	Hardness Requirement	Hard Chrome Plating	SUS440C (Equivalent)	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	HINGEPINS	1 Piece(s)	10 Day(s)	10	4 ～ 20	Nut (Threaded)	Shouldered	Stainless Steel	Hardness Requirement	Hard Chrome Plating	SUS440C (Equivalent)	D	E	-	-	5 ～ 30	-	-	-	5 ～ 200	-	3 ～ 16	-	-	0.5 ～ 125	-	-	-