Ejector Sleeves

Days to Ship
  • All
  • 5 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape
P (Tip diameter)(mm)

    Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

      Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

        Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

          Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

            Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

              Short Ejector Sleeves (Bushings For Ejector Pins)

                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                  Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                    Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                      Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                        Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                          Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                            Short Ejector Sleeves (Bushings for straight ejector pins)

                              Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Brand

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                Product Series

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Short Ejector Sleeves (Bushings For Ejector Pins)

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Days to Ship 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more
                                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                                MaterialSKD61SKD61SKD61SKD61SKD61SKD61SKD61SKH51SKH51SKD61SKD61SKD61SKH51SKD61SKH51
                                Surface treatmentNitridedNitridedNitridedNitridedNitridedNitridedNitridedNoNoNitridedNitridedNitridedNoNitridedNo
                                Head thickness4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)
                                Shaft diameter tolerance-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.020/-0.005 / -0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.030/-0.005 / -0.01/-0.02-0.01/-0.020/-0.005
                                D/P (Shaft diameter)(mm)3.5 ~ 203.5 ~ 204 ~ 164 ~ 103.5 ~ 104 ~ 104 ~ 103.2 ~ 143.2 ~ 143.5 ~ 104 ~ 204 ~ 202.5 ~ 84 ~ 163 ~ 8
                                V (Hole diameter)(mm)1.5 ~ 161.5 ~ 161.5 ~ 3001.5 ~ 81.5 ~ 81.5 ~ 81.5 ~ 80.8 ~ 12.20.8 ~ 12.21.5 ~ 7.91.5 ~ 151.5 ~ 151 ~ 6.81.5 ~ 121 ~ 6
                                Concentricity between the hole and shaft diameters◎0.06◎0.06◎0.06◎0.03◎0.03◎0.06◎0.03◎0.005 / ◎0.01◎0.01◎0.03◎0.06◎0.06◎0.01◎0.06◎0.005
                                Boring methodReamingReamingReamingReamingReamingReamingReamingGrindingWire cutting & polishingReamingReamingReaming-ReamingGrinding
                                Inner dia. toleranceH7H7H7H7H7H7H7+0.005/0 / +0.01/0+0.01/0H7H7H7+0.005/0 / +0.01/0H7+0.005/0
                                Tapered or notNoNoNoNoNoNoNoNoNoNoNoNoYesNoYes
                                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo
                                P (Tip diameter)(mm)--------------2.5 ~ 8

                                Loading...

                                1. 1

                                Related Categories to Ejector Sleeves