Coolant Spray Equipment

• 

  Semi-Dry Type Oil Cooler "Magic Cut e-Mist Standard Set"

  FUSOSEIKI

  [Features]
  · Semi-dry type lubrication cooling device.
  · Enables even ultra-small quantities of oil that cannot be seen by the naked eye to be confirmed at the drop speed of the liquid measure checker during lubrication.
  · By controlling the liquid amount, it can be used as needed for semi-dry lubrication or mist lubrication depending on the lubricated item and the application.
  · Mounting onto any apparatus is simple.
  · Particularly ideal for cutting aluminum and stainless steel.
  [Applications]
  · For unmanned oil supply to the conveyor.
  · For cooling, lubrication, and chip removal for drilling machines, tapping machines, lathes, dedicated machines, milling machines, gear cutters, end mills, reamers, die machines, engraving machines, grinders, etc., and in punching, bending, mold gathering, etc.

  Days to Ship:	Same day or more

• 

  Air Valve for Operation

  FUSOSEIKI

  [Features]
  · Switches on and off the air without power source.
  [Applications]
  · For air operation in accordance with air equipment control or work.

  Days to Ship:	Same day or more

• 

  Magnet for Manifold

  NOGA JAPAN

  Days to Ship:	2 Day(s) or more

• 

  Controller Valve

  NOGA JAPAN

  Optional component for MiniCool.

  Days to Ship:	4 Day(s) or more

• 

  Dual Nozzle Type Magnet

  NOGA JAPAN

  [Features]
  · Includes two 1/4 independent screw holes for mounting an additional nozzle for 2-nozzle use.
  · Can be used for cutting fluid supply.
  · With Powerful 80 kgf On/Off Magnet (DG0036 type)

  Days to Ship:	2 Day(s) or more

• 

  Noga, Cool

  NOGA JAPAN

  Spraying equipment with a Loc-line USA 1/4" flexible nozzle attached to a small, powerful NOGA magnet for use with cutting fluid, water-soluble coolant, and other liquids. Easy to set using small magnets, etc.

  Days to Ship:	5 Day(s) or more

• 

  Limit Valve with Magnet

  NOGA JAPAN

  These are optional parts for Cobra 2000.

  Days to Ship:	6 Day(s) or more

• 

  Mini Cool

  NOGA JAPAN

  [Features]
  · Noga MiniCool applies the Venturi principle to easily spray cutting fluid in air-spray form whenever compressed air is available.
  · Plug the siphon line into the cooling liquid container with the air hose as the air source, then fix the main body to the machine with the magnet before pressing the nozzle against the tool.
  · Pulling the knob and opening the valve causes a strong rush of coolant fluid mist to be sprayed.
  · The air volume can be adjusted with the control valve, and the amount of coolant sprayed can be adjusted with the nozzle

  Days to Ship:	5 Day(s) or more

• 

  Permanent Magnet

  NOGA JAPAN

  Optional component for MiniCool.

  Days to Ship:	4 Day(s) or more

Loading...