Thread Cutters

Days to Shipวันจัดส่ง
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 12 Day(s) or Less
  • 14 Day(s) or Less
Brand
Product Seriesชุดผลิตภัณฑ์
Days to Shipวันจัดส่ง
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

    Tap & Die Set

      Epoch D Thread Mill EDT-□.□□-□□-TH

        12 Piece Drill & Tap Set

          Collet Ratchet (Short & Long Reach)

            Epoch Thread Mill ET-□.□□-□□-PN

              Metric Thread Repair Kit

                Tap & Reamer Wrench (Bar Type)

                  Fixed Short Reach Tap Wrench

                    HSS Metric Taps Left Hand Thread -Straight Flute

                      HSS Die Tap Set

                        22 Piece HSS Metric Tap & Drill Set

                          TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                            Planet Cutter Series NC Planet Cutter WX-PNC

                              MMTS Micro Threading Tool

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                  Orbital Threading Cutter _TMO H508800/H5088006

                                    Carbide MC - Helical Cutter MC-CSLC

                                      HSS Straight Flute Taps

                                        ISO Metric Tap Set

                                          HSS Taps & Drill Set, Steel Case

                                            DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                              TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                                  Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                                    Thread Cutter _ TMC H505500/H5055006/H5055106/H505501/H5055016

                                                      UNC HSS Spiral Point Ground Taps

                                                        HSS Spiral Flute Ground Taps

                                                          Carbon Steel Metric Tap & Die Set

                                                            TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                                              Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                                Planet Cutter Series MC - Planet Cutter PNGT

                                                                  Planet Cutter Series Super Planet DR-PNAC

                                                                    Planet Cutter Series Spiral Carbide Planet Cutter OT-SFT-PNGT

                                                                      Planet Cutter Series Carbide Planet Cutter OT-PNGT

                                                                        Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                                                          Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                                            Orbital Threading Cutter _TMO H5083008

                                                                              Orbital Threading Cutter _TMO H5087006

                                                                                Orbital Threading Cutter _TMO H528800/H5288006

                                                                                  Orbital Threading Cutter _TMO H538800/H5388006

                                                                                    Thread Cutter _ 10 H5033008/H5133008

                                                                                      Thread Cutter _ 10 H5551106/H5651106

                                                                                        Thread Cutter _ 20 H5150106

                                                                                          Thread Cutter _ Ni 27 H5036006/H5036016

                                                                                            Thread Cutter _ Ni 27 H5336006/H5336016

                                                                                            Brand

                                                                                            RS Pro

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            GUHRING

                                                                                            WALTER PROTOTYP

                                                                                            YAMAWA MFG

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            GUHRING

                                                                                            WALTER PROTOTYP

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            RS Pro

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            WALTER PROTOTYP

                                                                                            Product Seriesชุดผลิตภัณฑ์

                                                                                            Tap & Die Set

                                                                                            Epoch D Thread Mill EDT-□.□□-□□-TH

                                                                                            12 Piece Drill & Tap Set

                                                                                            Collet Ratchet (Short & Long Reach)

                                                                                            Epoch Thread Mill ET-□.□□-□□-PN

                                                                                            Metric Thread Repair Kit

                                                                                            Tap & Reamer Wrench (Bar Type)

                                                                                            Fixed Short Reach Tap Wrench

                                                                                            HSS Metric Taps Left Hand Thread -Straight Flute

                                                                                            HSS Die Tap Set

                                                                                            22 Piece HSS Metric Tap & Drill Set

                                                                                            TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                                                                            Planet Cutter Series NC Planet Cutter WX-PNC

                                                                                            MMTS Micro Threading Tool

                                                                                            Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                                                                            Orbital Threading Cutter _TMO H508800/H5088006

                                                                                            Carbide MC - Helical Cutter MC-CSLC

                                                                                            HSS Straight Flute Taps

                                                                                            ISO Metric Tap Set

                                                                                            HSS Taps & Drill Set, Steel Case

                                                                                            DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                                                                            TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                                                            TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                                                                            Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                                                                            Thread Cutter _ TMC H505500/H5055006/H5055106/H505501/H5055016

                                                                                            UNC HSS Spiral Point Ground Taps

                                                                                            HSS Spiral Flute Ground Taps

                                                                                            Carbon Steel Metric Tap & Die Set

                                                                                            TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                                                                            Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                                                            Planet Cutter Series MC - Planet Cutter PNGT

                                                                                            Planet Cutter Series Super Planet DR-PNAC

                                                                                            Planet Cutter Series Spiral Carbide Planet Cutter OT-SFT-PNGT

                                                                                            Planet Cutter Series Carbide Planet Cutter OT-PNGT

                                                                                            Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                                                                            Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                                                            Orbital Threading Cutter _TMO H5083008

                                                                                            Orbital Threading Cutter _TMO H5087006

                                                                                            Orbital Threading Cutter _TMO H528800/H5288006

                                                                                            Orbital Threading Cutter _TMO H538800/H5388006

                                                                                            Thread Cutter _ 10 H5033008/H5133008

                                                                                            Thread Cutter _ 10 H5551106/H5651106

                                                                                            Thread Cutter _ 20 H5150106

                                                                                            Thread Cutter _ Ni 27 H5036006/H5036016

                                                                                            Thread Cutter _ Ni 27 H5336006/H5336016

                                                                                            Days to Shipวันจัดส่ง 7 Day(s) or more 1 Day(s) or more 7 Day(s) 7 Day(s) 3 Day(s) or more 7 Day(s) 7 Day(s) 7 Day(s) 7 Day(s) 7 Day(s) 7 Day(s) Same day or more Same day or more 3 Day(s) or more 5 Day(s) or more 12 Day(s) or more 3 Day(s) or more 7 Day(s) 7 Day(s) 7 Day(s) 2 Day(s) or more 4 Day(s) or more 2 Day(s) or more 5 Day(s) or more 12 Day(s) or more 61 Day(s) 7 Day(s) or more 7 Day(s) 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more
                                                                                            Screw Types-Meter--Meter------MeterMeter / unified / Taper for PipeOtherMeterMeterMeter / Taper for Pipe / Parallel for Pipes---MeterMeterMeterMeterMeter---MeterMeter / unifiedMeter / Taper for Pipe / Parallel for PipesMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeterMeterMeterunifiedunifiedMeterTaper for PipeMeterMeterunified
                                                                                            Screw size (Nominal)-M3 ~ M12--M3 ~ M12------M3 ~ M20-S0.1 ~ S1.4M6 ~ M20M1.6 ~ M806510X28R ~ 200505N300M---M3 ~ M16M2 ~ M12M3 ~ M12M6 ~ M20M3 ~ M16---M1.4 ~ M20--M6 ~ M12--M6 ~ M12-M2 ~ M6M1.6 ~ M121/4UN ~ No10UN1/4UN ~ No10UNM6 ~ M16NPTF1-2 ~ NPT1/16M10 ~ M20MJ4 ~ MJ121/2UNJ ~ No10UNJ
                                                                                            Pitch (P), Number of Threading(mm)-0.5 ~ 1.75--0.5 ~ 1.75------0.5 ~ 2.51 ~ 280.025 ~ 0.31 ~ 2.50.35 ~ 1.250.5 ~ 3---0.5 ~ 20.4 ~ 1.750.5 ~ 1.751 ~ 2.50.5 ~ 2---0.3 ~ 2.50.25 ~ 321 ~ 191 ~ 1.751 ~ 31 ~ 191 ~ 1.750.5 ~ 30.4 ~ 10.35 ~ 1.7518 ~ 5624 ~ 481 ~ 211.5 ~ 271 ~ 30.7 ~ 1.7520 ~ 32
                                                                                            Tool Material Type-Carbide--Carbide------CarbideCarbideCarbideCarbideCarbideCarbide---CarbideCarbideCarbideCarbideCarbide---CarbideCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                                                                            work material-Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎]--Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎]------Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]---Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]---Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
                                                                                            Tap Type-Thread cutter--Thread cutter------Thread cutterThread cutterThread cutterThread cutterThread cutterThread cutter---Thread cutterThread cutterThread cutterThread cutterThread cutter---Thread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                                                                                            Hole type-----------For through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor blind holeFor through hole / For blind hole---For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind hole---For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind hole-For blind holeFor blind hole
                                                                                            Coating Y/N-Available--Available------AvailableAvailableAvailableAvailableAvailable / NAAvailable---AvailableAvailableAvailableAvailableAvailable / NA---AvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable / NAAvailable / NAAvailableAvailableAvailableAvailableAvailable
                                                                                            Coating Type-For High Hardness (Silicon Group)--For General Steels (AlCrN, etc.)------TiAlNTiAlNTiAlNTiCNTiCN / Non-CoatedTiAlN---DLCTiAlNFor High Hardness (Silicon Group)TiCNTiCN / Non-Coated---TiAlNFor High Hardness (Silicon Group) / OtherTiNTiAlNTiAlNTiAlNTiAlNTiAlNOtherTiCNTiCN / Non-CoatedTiCN / Non-CoatedOtherTiCNTiCNTiCNTiCN
                                                                                            Overall Length (L)(mm)-50 ~ 80--50 ~ 80------57 ~ 11560 ~ 1204554 ~ 10238 ~ 6850 ~ 140---57 ~ 9258 ~ 7348 ~ 7454 ~ 10257 ~ 92---39 ~ 1054080 ~ 21062 ~ 8960 ~ 14580 ~ 14562 ~ 8960 ~ 1205738 ~ 7257 ~ 6357 ~ 6357 ~ 8357 ~ 9272 ~ 10454 ~ 7254 ~ 73

                                                                                            Loading...กำลังโหลด …

                                                                                            Related Categories to กลุ่มสินค้าที่เกี่ยวข้องสำหรับ Thread Cutters