• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.
  • เนื่องจากวันหยุดเทศกาลของซัพพลายเออร์ ผู้ผลิตบางรายจะหยุดทำการตั้งแต่วันที่ 1 - 7 ตุลาคม 2562 ซึ่งอาจทำให้สินค้าบางรายการใช้เวลาจัดส่งมากกว่าปกติ คลิก
    According to Supplier Traditional holiday, Some suppliers will be holiday during 1 - 7 October 2019 and may caused some product take longer lead time. click

3MTM Standard Socket / Header Socket Connector 79XX Series

3M<sup>TM</sup> Standard Socket / Header Socket Connector 79XX Series
  • Volume Discount

The socket connectors also support wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.

[Features]
Compatible with various headers and plug connectors for standard sockets/headers.
▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
▪ Also supports wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
· Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
· A film-type pull tab can be attached (J3490-X).
▪ Accessory key prevents incorrect insertion between the same number of pins (J3435-0000).

*Note: Strain relief sold separately. (Model: 3448-79**) **...Number of Pins.

PDF

Japanese Only

 
Part Number
7910-6000 FL
7910-6500 FL
7910-6500 SC
7910-B500 FL
7910-B500 SC
7914-6000 SC
7914-6500 FL
7914-6500 SC
7914-B500 SC
7916-6000 FL
7916-6500 FL
7916-6500 SC
7916-B500 FL
7916-B500 SC
7920-6500 FL
7920-6500 SC
7920-B500 FL
7920-B500 SC
7926-6000 FL
7926-6000 SC
7926-6500 FL
7926-6500 SC
7926-B500 FL
7926-B500 SC
7930-6000 SC
7930-6500 FL
7930-6500 SC
7930-B500 FL
7930-B500 SC
7934-6000 FL
7934-6000 SC
7934-6500 FL
7934-6500 SC
7934-B000 FL
7934-B500 FL
7934-B500 SC
7940-6000 FL
7940-6000 SC
7940-6500 FL
7940-6500 SC
7940-B000 FL
7940-B500 FL
7940-B500 SC
7950-6000 FL
7950-6000 SC
7950-6500 FL
7950-6500 SC
7950-6700 SC
7950-B500 FL
7950-B500 SC
7960-6000 SC
7960-6500 FL
7960-6500 SC
7960-6700 SC
7960-B500 FL
7960-B500 SC
7964-6500 FL
7964-6500 SC
7964-B500 FL
7964-B500 SC
Part NumberVolume DiscountDays to Shipวันจัดส่งRoHSConnector series initials Number Of Cores Specifications Features Dimension length
(mm)
Contact plating specification (other than contact area/touching area) Note 1
41 Day(s) or more -Number10Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion17.2Other: Nickel plating-
2 Day(s) or more -Number10Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion17.2Other: Nickel plating-
2 Day(s) or more 10Number10Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion17.2Other: Gold flash plating-
8 Day(s) -Number10Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion17.2Other: Nickel plating-
41 Day(s) or more -Number10Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion17.2Other: Gold flash plating-
41 Day(s) or more -Number14Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion22.3Other: Gold flash platingThere is one groove for an incorrect insertion prevention key.
2 Day(s) or more 10Number14Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion22.3Other: Nickel platingThere is one groove for an incorrect insertion prevention key.
2 Day(s) or more 10Number14Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion22.3Other: Gold flash platingThere is one groove for an incorrect insertion prevention key.
41 Day(s) or more -Number14Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion22.3Other: Gold flash platingThere is one groove for an incorrect insertion prevention key.
41 Day(s) or more -Number16Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion24.8Other: Nickel plating-
2 Day(s) or more 10Number16Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion24.8Other: Nickel plating-
2 Day(s) or more 10Number16Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion24.8Other: Gold flash plating-
1 Day(s) -Number16Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion24.8Other: Nickel plating-
41 Day(s) or more -Number16Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion24.8Other: Gold flash plating-
2 Day(s) or more 10Number20Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion29.9Other: Nickel plating-
2 Day(s) or more 10Number20Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion29.9Other: Gold flash plating-
8 Day(s) -Number20Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion29.9Other: Nickel plating-
41 Day(s) or more -Number20Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion29.9Other: Gold flash plating-
41 Day(s) or more -Number26Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion37.5Other: Nickel plating-
41 Day(s) or more -Number26Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion37.5Other: Gold flash plating-
Available 2 Day(s) or more 10Number26Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion37.5Other: Nickel plating-
2 Day(s) or more 10Number26Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion37.5Other: Gold flash plating-
1 Day(s) -Number26Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion37.5Other: Nickel plating-
81 Day(s) or more -Number26Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion37.5Other: Gold flash plating-
41 Day(s) or more -Number30Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion42.6Other: Gold flash plating-
2 Day(s) or more 10Number30Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion42.6Other: Nickel plating-
2 Day(s) or more 10Number30Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion42.6Other: Gold flash plating-
1 Day(s) -Number30Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion42.6Other: Nickel plating-
41 Day(s) or more -Number30Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion42.6Other: Gold flash plating-
41 Day(s) or more -Number34Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion47.7Other: Nickel plating-
41 Day(s) or more -Number34Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion47.7Other: Gold flash plating-
2 Day(s) or more 10Number34Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion47.7Other: Nickel plating-
2 Day(s) or more 10Number34Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion47.7Other: Gold flash plating-
41 Day(s) or more -Number34Cover shape: open end without adhesive on back surfaceNo nose to prevent incorrect insertion47.7Other: Nickel plating-
1 Day(s) -Number34Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion47.7Other: Nickel plating-
41 Day(s) or more -Number34Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion47.7Other: Gold flash plating-
41 Day(s) or more -Number40Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion55.3Other: Nickel plating-
41 Day(s) or more -Number40Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion55.3Other: Gold flash plating-
2 Day(s) or more 10Number40Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion55.3Other: Nickel plating-
2 Day(s) or more 10Number40Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion55.3Other: Gold flash plating-
41 Day(s) or more -Number40Cover shape: open end without adhesive on back surfaceNo nose to prevent incorrect insertion55.3Other: Nickel plating-
1 Day(s) -Number40Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion55.3Other: Nickel plating-
41 Day(s) or more -Number40Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion55.3Other: Gold flash plating-
41 Day(s) or more -Number50Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion68Other: Nickel plating-
41 Day(s) or more -Number50Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion68Other: Gold flash plating-
2 Day(s) or more 10Number50Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion68Other: Nickel plating-
2 Day(s) or more 10Number50Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion68Other: Gold flash plating-
41 Day(s) or more -Number50Cover shape: open end with adhesive on back surfaceTwo noses (left and right) to prevent incorrect insertion68Other: Gold flash plating-
2 Day(s) or more -Number50Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion68Other: Nickel plating-
41 Day(s) or more -Number50Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion68Other: Gold flash plating-
41 Day(s) or more -Number60Cover shape: open end with adhesive on back surfaceNo nose to prevent incorrect insertion80.7Other: Gold flash plating-
2 Day(s) or more 10Number60Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion80.7Other: Nickel plating-
2 Day(s) or more 10Number60Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion80.7Other: Gold flash plating-
41 Day(s) or more -Number60Cover shape: open end with adhesive on back surfaceTwo noses (left and right) to prevent incorrect insertion80.7Other: Gold flash plating-
2 Day(s) or more -Number60Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion80.7Other: Nickel plating-
41 Day(s) or more -Number60Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion80.7Other: Gold flash plating-
2 Day(s) or more 10Number64Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion85.8Other: Nickel plating-
2 Day(s) or more 10Number64Cover shape: open end with adhesive on back surfaceOne nose in center to prevent incorrect insertion85.8Other: Gold flash plating-
2 Day(s) or more -Number64Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion85.8Other: Nickel plating-
68 Day(s) or more -Number64Cover shape: open end without adhesive on back surfaceOne nose in center to prevent incorrect insertion85.8Other: Gold flash plating-

Loading...กำลังโหลด …

  1. 1

Basic Informationข้อมูลพื้นฐาน

Connector Shape Square shape Number 7 Applicable pin/contact Female (socket)
Application Board-to-Board Allowable Current(A) 1 Allowable Voltage(V) AC250/DC300
Wire connection method Pressure Welding Connection direction Straight Conforming Wire 28AWG stranded cable
Conforming accessories Pull-out type/incorrect insertion prevention key Contact material/treatment Copper alloy/nickel substrate, gold plating Contact plating specification (contact area/touching area) Touching area: Gold plating thickness 0.2 μm or higher

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Third-party Brand
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)